Copeland 4DP3F63KETSK800 Semi-Hermetic Discus Compressor 15 HP, 208/230/460/3 POE Oil,

Copeland 4DL3F63KETSK800

Refrigeration Research 5315 Refrigeration Receiver, 6 lb Capacity, 3/8" SAE Inlet x 3/8" SAE Valve Outlet, 10" L x 5" Diameter

• Refrigeration research receivers have been made continuously for over 50 years
• They are used widely by original equipment manufacturers throughout the industry
• They are backed by a reputation for quality and service
• These receivers with valves and fittings attached are hydrogen brazed for cleanliness and pressure tested for reliability
• 430 deg F fusible plug is installed on all receivers except #2030, #2039, and #9028
• All valves are supplied with steel stem caps with copper gaskets and brass flare nuts and caps, all receivers are powder coated for excellent corrosion resistance
• Pressure tested for 500 psi maximum working pressure

,
,

Refrigeration Research 3738

Copeland 6DT3F11ME-TSK-800 Semi-Hermetic Compressor, 30 HP, 208 - 230/460 VAC , 30 HP

• General 3-lead single VAC age, 6-lead part winding (575 VAC ), 9-lead dual VAC age
• Internal thermal Protectors - electronic sensors and control module External use with contactor
• Compressor family series
• Discus compressor cooling
• Displacement and valve plate
• Model variation
• ARI low temperature rated at -25/105 deg F primary application
• 255 oz initial oil charge, 245 oz oil recharge
• 15" length x 12" width x 29.19" height mounting
• 47.8 amp rated load, 235 amp locked rotor, 66.9 amp minimum circuit
• 6-cylinders
• 2.94" bore, 2.19" stroke
• 89 cu-"/Rev displacement

,
,

Copeland 6DT3F11ME-TSK-800

Copeland 6DL3F93KE-TSK-800 Semi-Hermetic Compressor, 27 HP, 93000 BTU, 208 - 230/460 VAC , 60 Hz

• General 3-lead single VAC age, 6-lead part winding (575 VAC ), 9-lead dual VAC age
• Internal thermal Protectors - electronic sensors and control module External use with contactor
• Compressor family series
• Discus compressor cooling
• Displacement and valve plate
• Model variation
• ARI low temperature rated at -25/105 deg F primary application
• 140 oz initial oil charge, 130 oz oil recharge
• 15" length x 12" width x 27.19" height mounting
• 67.9 amp rated load, 450 amp locked rotor, 95 amp minimum circuit
• 6-cylinders
• 2.69" bore, 2.19" stroke
• 74-1/2 cu-"/Rev displacement

,

Copeland 6DL3F93KETSK800

Copeland 6DP3R35ME-TSK-800 Semi-Hermetic Compressor, 35 HP, 350000 BTU, 208 - 230/460 VAC , 60 Hz

• General 3-lead single VAC age, 6-lead part winding (575 VAC ), 9-lead dual VAC age
• Internal thermal Protectors - electronic sensors and control module External use with contactor
• Compressor family series
• Discus compressor cooling
• Displacement and valve plate
• Model variation
• ARI high temperature rated at 45/130 deg F primary application
• 140 oz initial oil charge, 130 oz oil recharge
• 15" length x 12" width x 21.53" height mounting
• 62.6 amp rated load, 283 amp locked rotor, 87.6 amp minimum circuit
• 6-cylinders
• 2.69" bore, 2.19" stroke
• 74-1/2 cu-"/Rev displacement

,
,

Copeland 4RL2150ATSK800

The Henry Liquid Eye Sight has a unique"see-thru" feature that is more readable than other sight glasses. The dot on the tube is magnified when the tube is full of refrigerant to give a quick, easy indication.

• Shock resistant glass
• Color bar designed for HFC refrigerants
• Made in USA

,

Henry Technologies 3-020-053

White Rodgers Cooling Controls moisture indicators are designed to provide an accurate method of determining the moisture content of a system's refrigerant. The HMI is the highest sensitivity moisture indicator available and it detect moisture at 3% relative humidity (RH) providing plenty of time to make necessary adjustments before any damage is done. The Emerson AMI moisture indicator features a take-apart design for easier repair and the A-IHL saddle design moisture indicator is ideal for large diameter tubing.

• Highest sensitivity moisture indicator available
• Hermetic, leak-free construction
• Single indicator for all common refrigerants
• Accurate color calibration at low ppm levels and higher temperatures
• Wide angle viewing/high visibility window for ease of monitoring
• Solid copper connections
• All brass corrosion resistant body for fewer leaks

,

White Rodgers Cooling Controls HMI-1MM3

White Rodgers Cooling Controls moisture indicators are designed to provide an accurate method of determining the moisture content of a system's refrigerant. The HMI is the highest sensitivity moisture indicator available and it detect moisture at 3% relative humidity (RH) providing plenty of time to make necessary adjustments before any damage is done. The Emerson AMI moisture indicator features a take-apart design for easier repair and the A-IHL saddle design moisture indicator is ideal for large diameter tubing.

• Highest sensitivity moisture indicator available
• Hermetic, leak-free construction
• Single indicator for all common refrigerants
• Accurate color calibration at low ppm levels and higher temperatures
• Wide angle viewing/high visibility window for ease of monitoring
• Solid copper connections
• All brass corrosion resistant body for fewer leaks

,

White Rodgers Cooling Controls HMI-1FM3

White Rodgers Cooling Controls moisture indicators are designed to provide an accurate method of determining the moisture content of a system's refrigerant. The HMI is the highest sensitivity moisture indicator available and it detect moisture at 3% relative humidity (RH) providing plenty of time to make necessary adjustments before any damage is done. The Emerson AMI moisture indicator features a take-apart design for easier repair and the A-IHL saddle design moisture indicator is ideal for large diameter tubing.

• Highest sensitivity moisture indicator available
• Hermetic, leak-free construction
• Single indicator for all common refrigerants
• Accurate color calibration at low ppm levels and higher temperatures
• Wide angle viewing/high visibility window for ease of monitoring
• Solid copper connections
• All brass corrosion resistant body for fewer leaks

,

White Rodgers Cooling Controls HMI-1TT3

Parker Sight Glass Moisture Indicator
The Parker PSG Moisture and Liquid Indicator combines the two functions of moisture and liquid indication into a single economical product. It takes the guess work out of servicing refrigeration and air conditioning equipment. The PSG assists the technician in determining the state of the circulating refrigerant at a particular location and if a safe moisture level exists in the system. Excessive moisture in refrigerant systems can cause unwanted chemistries such as hydrolysis of lubricants and other materials, corrosion of metals, copper plating, ice formation at the metering device and a chemical change in the motor insulation of a hermetic compressor.,
,

Parker PSG-3S

Parker Sight Glass Moisture Indicator
The Parker PSG Moisture and Liquid Indicator combines the two functions of moisture and liquid indication into a single economical product. It takes the guess work out of servicing refrigeration and air conditioning equipment. The PSG assists the technician in determining the state of the circulating refrigerant at a particular location and if a safe moisture level exists in the system. Excessive moisture in refrigerant systems can cause unwanted chemistries such as hydrolysis of lubricants and other materials, corrosion of metals, copper plating, ice formation at the metering device and a chemical change in the motor insulation of a hermetic compressor.,

Parker PSG-3MF

Sanhua sight glasses provide an immediate visual of system liquid condition. Easy to follow green and yellow color indicators alert to dry or wet conditions. When a system has a refrigerant shortage or restriction, the large sight glass allows for easy detection of bubbles. Sanhua Sight Glasses are compatible with common HCFC and HFC refrigerants and are UL approved to a maximum operating pressure of 667 psig.

Sanhua SG-3-FM