Brand Name
Type
Length
Width
Thickness
Color
|◀ ◀ 49 - 60 of 68 ▶ ▶|
View:

Elbow 90 Degree Long Radius Cover Black 1-3/8" x 1" An innovative solution to insulating pipe bends and intersection

K-Flex 801LRE100138 K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 1"



Item#:
801LRE100138
Manufacturer Item:
801-LRE-100138
Manufacturer:
K-FLEX USA LLC
 
K-Flex_Broc

Elbow 90 Degree Long Radius Cover Black 1-1/8" x 1" An innovative solution to insulating pipe bends and intersection

K-Flex 801LRE100118 K-Flex Black Long Radius 90 Degree Elbow Cover 1-1/8" x 1"



Item#:
801LRE100118
Manufacturer Item:
801-LRE-100118
Manufacturer:
K-FLEX USA LLC
 
K-Flex_Broc

Item#:
801LRE148138
 
K-Flex_Broc

Item#:
801LRE100318
 
K-Flex_Broc

Elbow 90 Degree Long Radius Cover Black 1-3/8" x 3/4" >>LIMITED STOCK CLEARANCE ITEM<<

K-Flex 801-LRE-068138 K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 3/4"



Item#:
801-LRE-068138
Manufacturer Item:
801-LRE-068138
Manufacturer:
K-FLEX USA LLC
 
K-Flex_Broc

Item#:
801LRE068048
 
K-Flex_Broc

Cushion Clamp 3/4" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location
    • Item#:
    UX3410
    Manufacturer Item:
    UX3410
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3410_Broc

    Cushion Clamp 3/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location
    • Item#:
    UX3810
    Manufacturer Item:
    UX3810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3810_Broc

    Cushion Clamp 5/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location
    • Item#:
    UX5810
    Manufacturer Item:
    UX5810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX5810_Broc

    Cushion Clamp 1/2" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location
    • Item#:
    UX1210
    Manufacturer Item:
    UX1210
    Manufacturer:
    MILWAUKEE ELECTRIC TOOL CORP.
     
    UX1210_Broc

    Hydra-Zorb Klo-Shure 724112 Zinc Dichromate Mild Steel Clamp Insulated

    Klo-Shure 724112 Hydra-Zorb Klo-Shure 724112 Zinc Dichromate Mild Steel Clamp Insulated
    Item#:
    724112
    Manufacturer Item:
    724112
    Manufacturer:
    HYDRA-ZORB COMPANY
     
    724112_Spec

    Cushion Clamp 1-5/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location
    • Item#:
    UX15834
    Manufacturer Item:
    UX15834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX15834_Broc
    |◀ ◀ 49 - 60 of 68 ▶ ▶|
    View: