Brand Name
BTU
Voltage
Position
|◀ ◀ 1 - 12 of 47 ▶ ▶|
View:

Air Handler Multi-Position Piston 3-1/2 Ton 208/230 VAC Installed TXV 49-5/8" H x 17-5/8" W x 22-1/16" D

  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low Voltage circuit protective fuse (3 amp) inline on wire harness

    INTERNATIONAL COMFORT PRODUCTS FEM4P4200AL

    • Item#:
    FEM4P4200AL
    Manufacturer Item:
    FEM4P4200AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FEM4P4200AL_Spec

    Air Handler Multi-Position Piston 2.5 Ton 208/230 VAC Installed TXV 49-5/8" H x 17-5/8" W x 22-1/16" D

  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low Voltage circuit protective fuse (3 amp) inline on wire harness

    INTERNATIONAL COMFORT PRODUCTS FEM4P3000AL

    • Item#:
    FEM4P3000AL
    Manufacturer Item:
    FEM4P3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FEM4P3000AL_Spec

    Air Handler Multi-Position 2 Ton 208/230 VAC W/Observer 800 CFM Smart Diagnostic 42-11/16" H x 17-5/8" W x 22-1/6" D

    Gray Pre-Painted Galvanized Cabinet Sheet Metal Cabinet Upflow/Downflow/Horizontal Multi-Position Type A Evaporator Fan Coil with EC Motor and TXV Metering,
    • Communicating, self configuring when used with observer communicating wall control
    • Smart diagnostic for easier troubleshooting
    • Bi-flow hard-shutoff R-410A TXV metering device
    • HUD approved for manufactured housing
    • Primary and secondary brass drain connections
    • Energy efficient variable speed ECM motor
    • Ultra - low power consumption during fan only operation
    • High duct static capability
    • Pre-painted Galvanized sheet metal cabinet insulation with vapor barrier
    • Cabinet construction designed to prevent cabinet sweating
    • Meets requirements of a 2% cabinet leakage rate when tested at 1" WC of static pressure
    • Modular cabinet on 5 Ton model
    • Multiple electrical entry for application flexibility
    • Low VAC age terminal strip
    • Easy plug connection provided for quick installation of accessory heater packages
    • Factory supplied washable filter easily removed - no tools required


      International Comfort Products FCM4X2400AL

    Item#:
    FCM4X2400AL
    Manufacturer Item:
    FCM4X2400AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCM4X-ICP_Spec

    Air Handler Horizontal 2 Ton 24K BTU 208/230 TXV R410A 10-1/4" H x 37-1/4" W x 26-3/8" D

    HORIZONTAL FAN COILS
  • FMU4Z and FMC4Z 11/2, 2, 21/2, and 3 Tons
  • FMU4X and FMC4X 11/2, 2, 21/2, and 3 Tons
  • Horizontal application only
  • Accessory fieldinstalled electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40 VA 208/230v160 transformer
  • All Models use R410A TXV metering device
  • Adjustable condensate drainpan
  • FMC4X & FMC4Z
  • Horizontal return applications require field fabricated bottom cover
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193
  • Cabinets constructed to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing
  • PERFORMANCE
  • PSC motor on all FMU4X & FMC4X models
  • ECM motor on all FMU4Z & FMC4Z models
  • EASY TO INSTALL AND SERVICE
  • Acoil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibility
  • Primary and secondary drain connections exit from the back or side of the cabinet
  • Supports furreddown ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU4X & FMC4X models with AL in the 10th & 11th position

    International Comfort Products FMU4X2400AL

    • Item#:
    FMU4X2400AL
    Manufacturer Item:
    FMUX2400AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMC4X-FMC4Z-ICP_Install
    FMU4X2400AL_Spec

    Air Handler Multi-Position 3 Ton 208/230 TXV R410A ECM Motor 49-5/8" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied


    FXM4X3600AL

    • Item#:
    FXM4X3600AL
    Manufacturer Item:
    FXM4X3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3600AL_Spec

    Air Handler Multi-Position 2-1/2 Ton 208/230 TXV R410A ECM Motor 53-7/16" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied



    INTERNATIONAL COMFORT PRODUCTS FXM4X3000AL

    • Item#:
    FXM4X3000AL
    Manufacturer Item:
    FXM4X3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3000AL_Spec

    Air Handler Multi-Position 1-1/2 Ton 208/230 TXV R410A ECM Motor 49-5/8" H x 17-5/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    INTERNATIONAL COMFORT PRODUCTS FXM4X1800AL

    • Item#:
    FXM4X1800AL
    Manufacturer Item:
    FXM4X1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X1800AL_Spec

    Air Handler Multi-Position 5 Ton 208/230 TXV R410A ECM Motor 59-3/16" H x 24-11/16" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
    • Item#:
    FVM4X6000BL
    Manufacturer Item:
    FVM4X6000BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FVM4X6000BL_Install
    FVM4X6000BL_Spec

    Air Handler Multi-Position 4 Ton 208/230 TXV R410A ECM Motor 53-7/16" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    International Comfort Products FVM4X4800BL

    • Item#:
    FVM4X4800BL
    Manufacturer Item:
    FVM4X4800BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FVM4X4800BL_Install
    FVM4X4800BL_Spec

    Air Handler Multi-Position 2 Ton 208/230 TXV R410A ECM Motor 42-11/16" H x 17-5/8" L x 22" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
    • Item#:
    FVM4X2400BL
    Manufacturer Item:
    FVM4X2400BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FVM4X2400BL_Install
    FVM4X2400BL_Spec

    Air Handler Multi-Position 4 Ton 120 VAC 3 Speed Motor TXV R410A 53" H x 26" D x 22" W

    Advance Distributers Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with Piston Metering and Slant Coil, 48000 BTU, 4 Ton, 20 kw, 115 VAC
      Rifled copper tubing, patented lance fin design
    • High efficiency 3-speed motors
    • Dynamically balanced blowers for quiet, vibration-free operation
    • Drain pans are molded of corrosion proof engineering polymer
    • Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
    • Filter rack with filter - built into every air handler
    • Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
    • Fan time delay available as kit or factory installed
    • Easily converted to counterflow with kit
    • All coils are individually pressure tested at 450 psi, then pressurized and sealed
    • 8" width x 10" diameter wheel
    • Constant speed, 3-speed blower motor
    • Right hand refrigerant and drain connection
    • Slab number (B6)
    • 0 and 5 kw, hot water standard stripped wire
    • 17" width x 17" depth supply duct opening
    • 14" width x 17-1/4" depth return duct opening

      BCRMC3148-S03

    Item#:
    BCRMC3148-S03
    Manufacturer Item:
    BCRMC3148-S03
    Manufacturer:
    ADVANCED DISTRIBUTOR PRODUCTS
     
    ADP_Broc

    Air Handler 1-1/2-2 Ton R410A ECM Motor 7 KW 208/230/1 Non-Communicating 35" H x 22" D x 17-1/2" W

    Fujitsu FB17TSJ07NB Air Handler 1-1/2-2 Ton R410A 208/230 VAC 7 KW 17" Wide
      ndustry Standard R-410A Refrigerant
    • Models featuring Electric Heat without Indoor CoolingCoil
    • Quiet and efficient X-13 (ECM) motor technology
    • Only 35" tall and 4-way convertible for all those tight spaces
    • Available from factory in upflow and horizontal configurations
    • Nominal airflow up to 0.5" eXternal static pressure with reduced airflow up to 1.0" eXternal static pressure
    • Factory installed MultiFleX coils
    • Sturdy steel construction with 1" [25.4 mm] of foil faced insulation for eXcellent sound and insulating characteristics
    • Permanent, easily accessible and washable filter furnished standard
    • Circuit breaker (standard on units with more than 11 kW) meets U.L. and cUL requirements for service disconnect
    • Factory installed auXiliary electric heat provides eXact heat for indoor comfort over a variety of applications
    • Fan settings for selectable, customized cooling airflow over a wide variety of applications
    • Cabinet air leakage less than 2% at 1" H2O when tested in accordance with ASHRAE standard 193,

      FB17TSJ07NB

    Item#:
    FB17TSJ07NB
    Manufacturer Item:
    FB17TSJ07NB
    Manufacturer:
    FUJITSU
     
    FB17TSJ07NB
    FB17TSJ07NB_Spec
    |◀ ◀ 1 - 12 of 47 ▶ ▶|
    View: