S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Pro1 IAQ T855ISH Non-Programmable WIFI Thermostat 7 Day 5-1 4 Heat/2 Cool
Pro1 IAQ T855ISH
Diversitech UC3642-3 Ultralite Equipment Pad
- 36" x 42" x 3" H Fiber Reinforced Cement Pad
Product - Extremely lightweight, the UltraLite pad is a concrete pad at the weight of plastic, about 2.5 lbs. per square foot
- Concrete outer skin and EPS foam core provide flexibility and vibration dampening
- Flat bottom design provides excellent resistance to sinking and settling
- The textured surface of the UltraLite prevents equipment sliding and allows water drainage
- Extensive selection of sizes available including wedge-shaped pad
- Drillable for securing unit (ÂĽ x 1-ÂĽ" Tapcon recommended), either side or top surface
- Freeze/thaw, UV, chemical & flame-resistant for long-term life outdoors
- Tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution
- Resistant to heating caused by the compressor and the surface is resistant to heat from incidental torch flame during installation,
,
Diversitech UC3642-3
Item#:
UC3642-3
Manufacturer Item:
UC3642-3
Manufacturer:
DIVERSITECH CORP.
Aire-Flo 4AC13B42P
At AprilAire, our mission has always been to make homes healthy through intuitive design and professional-grade solutionsbecause healthy homes are the foundation for healthy people, families, and communities.
Healthy Living Everyone deserves to breathe Healthy Airno matter where you live or what your circumstances are
Simplicity by Design
Our Healthy Air solutions are designed to be intuitive, easy to use, and environmentally friendly.
Making a Difference
Our work is fueled by a passion for making a Healthy Air difference.
Real
We're committed to delivering real results through dedication to our customers and solutions that perform.
Aprilaire 8446AA
Fujitsu RHGL-120ZL
,
Honeywell TB6575A1000
Item#:
TB6575A1000
Manufacturer Item:
TB6575A1000
Manufacturer:
HONEYWELL
,
Honeywell T822K1042
Fujitsu FH6024TTSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
Fujitsu FH6024TTSASN
Item#:
FH6024TTSASN
Manufacturer Item:
FH6024TTSASN
Manufacturer:
FUJITSU(UNITARY)
,
Honeywell T834N1002
Item#:
T834N1002
Manufacturer Item:
T834N1002
Manufacturer:
HONEYWELL
The vertical 70 series thermostats build your new construction business. It's the first series of Flexible thermostats enabling customers to wire and mount one subbase for use with the temporary new construction thermostat and easily snap on an upgrade to any 1E78 digital model upon building completion. The vertical 70 series low-profile design blends narrow width with new home decors. The universal subbase, for use with all 1E78 models, is designed to mount on a 2 x 4" junction box or directly to the wall. There is also an optional wall plate for use in retro-fit applications. The 70 series thermostats are battery powered, making them easy to install and compatible with most heating and cooling systems. The vertical 70 series is perfect for new construction customers who want a quick and easy transition to job completion.
- Fossil fuel or electric compatible
- Large LCD with backlight, easy-to-read thermostat display lighted display for easier low-light viewing
- Selectable celsius or fahrenheit temperature display
- Includes B/O terminals
- Electronic temperature accuracy
- Energy savings up to 33%
- Adjustable room temperature calibration
- Covers wall marks left by most mechanical thermostats the need for an extra wall plate
- Maintains room temperature differential within plus or minus 1 deg
White Rodgers 1E78-144
Item#:
1E78-144
Manufacturer Item:
1E78-144
Manufacturer:
WHITE-RODGERS DIV OF COPELAND
The vertical 70 series thermostats build your new construction business. It's the first series of Flexible thermostats enabling customers to wire and mount one subbase for use with the temporary new construction thermostat and easily snap on an upgrade to any 1E78 digital model upon building completion. The vertical 70 series low-profile design blends narrow width with new home decors. The universal subbase, for use with all 1E78 models, is designed to mount on a 2 x 4" junction box or directly to the wall. There is also an optional wall plate for use in retro-fit applications. The 70 series thermostats are battery powered, making them easy to install and compatible with most heating and cooling systems. The vertical 70 series is perfect for new construction customers who want a quick and easy transition to job completion.
- Fossil fuel or electric compatible
- Large LCD with backlight, easy-to-read thermostat display lighted display for easier low-light viewing
- Selectable celsius or fahrenheit temperature display
- Includes B/O terminals
- Electronic temperature accuracy
- Energy savings up to 33%
- Adjustable room temperature calibration
- Covers wall marks left by most mechanical thermostats the need for an extra wall plate
- Maintains room temperature differential within plus or minus 1 deg
- 4-time and 4-temperature settings per program for heating and cooling
White Rodgers 1E78-151
Item#:
1E78-151
Manufacturer Item:
1E78-151
Manufacturer:
WHITE-RODGERS DIV OF COPELAND
Thermo Pride AH2436AE1 Air Handler Hydro 2-3 Ton ECM Motor115 VAC
- Powder coated heavy-gauge steel cabinet for long lasting quality and durability
- Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
- GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
- Bottom return air in upflow position, left or right air return in horizontal position
- Foil-faced insulation for reduced noise and improved efficiency
- Horizontal drain pan built in to facilitate removal of A/C condensate
- Made in the USA,
,
Thermo Pride AH2436AE1
Item#:
AH2436AE1
Manufacturer Item:
AH2436AE1
Manufacturer:
THERMO PRODUCTS, LLC
