Fujitsu FH6024TTSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Fujitsu FH6024TTSASN

REFRIGERATION CIRCUIT

Copeland Scroll compressors on all models

Suction line accumulator factory installed

Biflow filterdrier included for field installation

Integrated solid state control with TimeTemperature Defrost

High and Low pressure switches

Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE

Easy Access service valves on all models

External high and low refrigerant service ports

Only two screws to access control panel

Factory charged with R410A refrigerant BUILT TO LAST

Bakedon powder coat finish over galvanized steel

Postpainted (black) coil fins

Coated, weatherresistant cabinet screws

Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

International Comfort Products NXH518GKP

RectorSeal SS2-1 Overflow Condensate Cut-Off Switch,

RectorSeal NG-STARTPAK

RectorSeal Safe-T-Switch 97622 Mini-Split System, 15 - 250 VAC/15 - 100 VDC, Import

RectorSeal SS2-1

Honeywell Home TH1100DH1004 Non-Programmable Thermostat Heat Only 24/750 Mv Horz.,
,

Century Brass W24-30

Diversitech 36X48X3 Gray Polystyrene Foam Equipment Pad 36" L x 48" W x 3" H,
,

Diversitech 36X48X3

White Rodgers Cooling Controls Soild Core Liquid Line Drier 3/8" SAE

• Rated for 600 PSI
  
  • R410A Usage
    
    • Full Flow Fittings for Low Pressure Drop
      
      • Protect Refrigeration Systems from Liquid and Solid Contaminants
        
        • Moisture and Acid Removal
          
          
          
          

          White Rodgers Cooling Controls ADK032SVCAP

White Rodgers Cooling Controls EK 053S VV Epoxy Powder Coated Steel Contractor Liquid Line Filter Drier, 3/8" Male x Female

• Extended solid copper connections
• Dual access valves for faster and easier system diagnosis
• Incorporates all the internal features of the premium EK
• Desiccant blend - optimized for high water capacity and acid capacity

,

White Rodgers Cooling Controls EK053SVV

White Rodgers Cooling Controls Epoxy Powder Coated Suction Line Filter Drier, 7/8" OD

• Dual access valves for easy pressure readings
• Activated carbon blend for soluble contaminant and wax
• Solid copper connections
• Charcoal blend

Sid Harvey Item #:ASK307S-VV-HH: Replaces Part #:'s : C-307-S-T-HH,

White Rodgers Cooling Controls ASK307S-VV-HH

White Rodgers Cooling Controls Epoxy Powder Coated Suction Line Filter Drier, 3/4" OD

• Dual access valves for easy pressure readings
• Activated carbon blend for soluble contaminant and wax
• Solid copper connections
• Charcoal blend

Sid Harvey Item #:ASK166S-VV-HH: Replaces Part #:'s : C-166-S-T-HH,

White Rodgers Cooling Controls ASK166S-VV-HH

White Rodgers Cooling Controls Epoxy Powder Coated Suction Line Filter Drier, 7/8" OD

• Dual access valves for easy pressure readings
• Activated carbon blend for soluble contaminant and wax
• Solid copper connection
• Charcoal blend

Sid Harvey Item #:ASK167S-VV-HH: Replaces Part #:'s : C-167-S-T-HH,

White Rodgers Cooling Controls ASK167S-VV-HH

White Rodgers Cooling Controls Epoxy Powder Painted Bi-Directional Liquid Line Filter Drier, 3/8" OD

• Internal check valves allow flow and filtration in either direction, eliminates need for External check valves
• High moisture and acid removal capacity
• Approved for POE oils with Copeland compressor
• Desiccant blend: optimized for high water capacity and acid capacity
• Corrosion resistant epoxy powder paint finish
  
  
  
  

  White Rodgers Cooling Controls BFK165