|◀ ◀ 25 - 36 of 410 ▶ ▶|
View:

Air Handler 2.5 Ton 30K BTU Horizontal ECM Motor TXV R410A 10-1/4" H x 49-1/4" W x 26-3/8" D

Features
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40 VA 208/230-1-60 supply voltage
  • All Models use R-410A TXV metering device
  • All Aluminum coils
  • Adjustable condensate drainpan
  • FMC4X & FMC4Z
  • Horizontal return applications require field fabricated bottom cover or solid access panel accessory kit
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when texted to ASHRAE Standard 193
  • Cabinets constructed to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing
  • PSC motor on all FMU4X & FMC4X models
  • ECM motor on all FMU4Z & FMC4Z models
  • Easy to Install and Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibilty Primary and secondary drain connections exit from the back or side of the cabinet.
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU4X &
  • FMC4X models with "AL" in the 10th and 11th position of model number

    International Comfort Products FMC4Z2400AL

    • Item#:
    FMC4Z3000AL
    Manufacturer Item:
    FMC4Z3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMC4X-FMC4Z-ICP_Install

    Air Handler Multi-Position 3 Ton 208/230 TXV R410A ECM Motor 49-5/8" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied


    INTERNATIONAL COMFORT PRODUCTS FXM4X3600AL

    • Item#:
    FXM4X3600AL
    Manufacturer Item:
    FXM4X3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3600AL_Spec

    Air Handler Multi-Position 2-1/2 Ton 208/230 TXV R410A ECM Motor 53-7/16" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied


    International Comfort Products FXM4X1800AL

    • Item#:
    FXM4X3000AL
    Manufacturer Item:
    FXM4X3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3000AL_Spec

    Bosch Heat Pump Condensing Unit Inverter 5 Ton

  • Intelligent control features help adjust the output capacity, allowing the unit to keep the temperature and humidity at your desired levels without fluctuation The high efficiency variable capacity inverter compressor can adjust to any speed between 33% and 110% (in1% increments) to perfectly cool and heat your home using minimal energy for maximum comfort
  • 1-1/2 or 2 ton cooling capacity - 20,000 BTU's to 24,000 BTU's heating capacity The air coil design provides exceptional heat transfer and low air resistance Direct drive fan blades provide vortex suppresion to reduce sound of airflow exiting the condenser giving sound levels as low as 56 dB
  • Condensers include an electronic expansion valve (EEV) to ensure proper refrigerant flow during all conditions
  • Compressor liquid return protection - Compressor high or low compression ratio protection - Compressor high temperature protection - High / low voltage protection and over current protection - IPM and electronic control board high temperature protection

    Bosch BOVB-36HDN1-M20G

    • Item#:
    BOVB-60HDN1-M18M
    Manufacturer Item:
    8-733-955-037
    Manufacturer:
    BOSCH THERMOTECHNOLOGY CORP
     
    SV-SERIES-BOSH_Broc

    Air Handler Multi-Position 1-1/2 Ton 208/230 TXV R410A ECM Motor 49-5/8" H x 17-5/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    International Comfort Products FTMA4X24L0BA

    • Item#:
    FXM4X1800AL
    Manufacturer Item:
    FXM4X1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X1800AL_Spec

    Bosch Heat Pump Condensing Unit Inverter 3 Ton

  • Intelligent control features help adjust the output capacity, allowing the unit to keep the temperature and humidity at your desired levels without fluctuation The high efficiency variable capacity inverter compressor can adjust to any speed between 33% and 110% (in1% increments) to perfectly cool and heat your home using minimal energy for maximum comfort
  • 1-1/2 or 2 ton cooling capacity - 20,000 BTU's to 24,000 BTU's heating capacity The air coil design provides exceptional heat transfer and low air resistance Direct drive fan blades provide vortex suppresion to reduce sound of airflow exiting the condenser giving sound levels as low as 56 dB
  • Condensers include an electronic expansion valve (EEV) to ensure proper refrigerant flow during all conditions
  • Compressor liquid return protection - Compressor high or low compression ratio protection - Compressor high temperature protection - High / low voltage protection and over current protection - IPM and electronic control board high temperature protection

    Bosch BOVA-60MTB-M19E

    • Item#:
    BOVB-36HDN1-M18M
    Manufacturer Item:
    8-733-955-036
    Manufacturer:
    BOSCH THERMOTECHNOLOGY CORP
     
    SV-SERIES-BOSH_Broc

    Non-Programmable Thermostat 2-Wire Heat Only 24 VAC

    Lux Products PSD010B-010 Non-Programmable Thermostat 2-Wire Heat Only 24 VAC



    Lux Products PSD010B-010

    Item#:
    PSD010B-010
    Manufacturer Item:
    PSD010B-010
    Manufacturer:
    JOHNSON CONTROLS, INC.
     
    PSD010B-010_Install
    PSD010B-010_Spec

    Programmable Thermostat 7 Day 2 Heat/2 Cool 40-90 Degrees

    Robertshaw Controls RS6220 Programmable Thermostat 7 Day 2 Heat/2 Cool 40-90 Degrees



    PSG Control T-55

    Item#:
    RS6220
    Manufacturer Item:
    RS6220
    Manufacturer:
    ROBERTSHAW CONTROLS CO.
     
    RS6220_Broc
    RS6220_Install

    Programmable Thermostat 7/5-1-1/5-2 Day 2H/1C Heat Pump 40-90 Deg

    Honeywell TH4210U2002 White 7/5-1-1/5-2 days or Non-Programmable Thermostat, 1 Heat/1 Cool Conventional Systems, 2 Heat/1 Cool Heat Pumps, 20 - 30 VAC , 37 - 102 deg F
    • The T series programmable thermostat streamlines everything from product selection and installation to customer service and support
    • With a standard footprint and simple interface, the T series will enhance the entire thermostat experience for you and your customers alike
    • Uses the UWP mounting system that's standard across all T series thermostats
    • Easy upsell to a connected lyric T6 Pro wi-fi when your customer is ready for wi-fi (C-wire required)
    • Simple push-butTon functionality
    • Filter change reminders
    • 5-year warranty
    • Medium display, soft key controls



      HONEYWELL TH4210U2002RI

    Item#:
    TH4210U2002RI
    Manufacturer Item:
    TH4210U2002
    Manufacturer:
    HONEYWELL

    Equipment Pad Ultralite 40" x 53" x 3 " H Fiber Reinforced Cement Pad

    Diversitech U4054-3 Ultralite Equipment Pad 40" x 53" x 3 " H Fiber Reinforced Cement Pad



    Diversitech QSMS1204

    Item#:
    U4054-3
    Manufacturer Item:
    U4054-3
    Manufacturer:
    DIVERSITECH CORP.
     
    Diversitech-Pads_Broc
    U4054-3

    Concrete Pavers 24" x 30" x 2"

    Glen-Grey 24X30X2 Pavers



    Glen-Grey 24X24X2--PAVERS

    Item#:
    24X30X2--PAVERS
    Manufacturer Item:
    24X30X2--PAVERS
    Manufacturer:
    GLEN-GERY CORPORATION

    Programmable Thermostat 7/5-1-1 5-2 Day 2 H/2 C Conventional System

    Honeywell TH6320U2008/U 7, 5-1-1, 5-2 days Program Thermostat, Up to 2H/2C Conventional System, Up to 3H/2C Heat Pump, 20 - 30 VAC , 40 - 90 deg F Heat, 50 - 99 deg F Cool
    • Push butTon programmable
    • Optional dual fuel
    • Flexible scheduling
    • Large display, soft key controls
    • Honeywell's UWP mounting system




    Honeywell TH6320U2008GS

    Item#:
    TH6320U2008GS
    Manufacturer Item:
    TH6320U2008/UA
    Manufacturer:
    HONEYWELL
     
    TH6320U2008GS
    |◀ ◀ 25 - 36 of 410 ▶ ▶|
    View: