S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Fujitsu FO6016CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 4 Ton
- New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
- Better coat paint system for a long lasting professional finish.
- Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
- Modern cabinet aesthetics increased curb appeal with visually appealing design.
- Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
- Optimized fan orifice optimizes airflow and reduces unit sound.
- Rust resistant screws confirmed through 1500-hour salt spray testing.
- 3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
- 15" wide, industry leading corner service access makes repairs easier and faster.
- External gauge port access allows easy connection of low-loss gauge ports.
- Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
- Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
- Service trays hold fasteners or caps during service calls.
- QR code provides technical information on demand for faster service calls.
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
,Fujitsu FO6016CSJNA
Fujitsu FO6016CSJNA
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
- Variable speed heat pump with observer communicating control system
- Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
- Electronic expansion valve (EXV) for precise heating control
- High pressure switch
- Suction pressure transducer
- Pressure equalizer valve for easy starting
- Compressor discharge temperature sensor, coil temperature sensor
- Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
- Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
- Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
- High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
- Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
- Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
- High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
- Coated inlet grille with 3/8 Inch grille spacing for extra protection
- Corner posts for extra strength and style
- 10 years limited parts warranty
- 5 years parts limited warranty
- Coil guard grille
- Sales code
- Smart comfort deluxe 18 with SmartSense technology
TVH837GKA
Item#:
TVH837GKA
Manufacturer Item:
TVH837GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
- Variable speed heat pump with observer communicating control system
- Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
- Electronic expansion valve (EXV) for precise heating control
- High pressure switch
- Suction pressure transducer
- Pressure equalizer valve for easy starting
- Compressor discharge temperature sensor, coil temperature sensor
- Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
- Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
- Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
- High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
- Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
- Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
- High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
- Coated inlet grille with 3/8 Inch grille spacing for extra protection
- Corner posts for extra strength and style
- 10 years limited parts warranty
- 5 years parts limited warranty
- Coil guard grille
- Sales code
- Smart comfort deluxe 18 with SmartSense technology
TVH836GKA
Item#:
TVH836GKA
Manufacturer Item:
TVH836GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
- Variable speed heat pump with observer communicating control system
- Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
- Electronic expansion valve (EXV) for precise heating control
- High pressure switch
- Suction pressure transducer
- Pressure equalizer valve for easy starting
- Compressor discharge temperature sensor, coil temperature sensor
- Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
- Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
- Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
- High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
- Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
- Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
- High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
- Coated inlet grille with 3/8 Inch grille spacing for extra protection
- Corner posts for extra strength and style
- 10 years limited parts warranty
- 5 years parts limited warranty
- Coil guard grille
- Sales code
- Smart comfort deluxe 18 with SmartSense technology
TVH825GKA
Item#:
TVH825GKA
Manufacturer Item:
TVH825GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu FO3617CTJCBA A/C Condensing Unit Non-Communicating No Pressure Switch 17 SEER 208/230/1 R410A 3 Ton
- New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
- Better coat paint system for a long lasting professional finish.
- Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
- Modern cabinet aesthetics increased curb appeal with visually appealing design.
- Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
- Optimized fan orifice optimizes airflow and reduces unit sound.
- Rust resistant screws confirmed through 1500-hour salt spray testing.
- 3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
- 15" wide, industry leading corner service access makes repairs easier and faster.
- External gauge port access allows easy connection of low-loss gauge ports.
- Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
- Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
- Service trays hold fasteners or caps during service calls.
- QR code provides technical information on demand for faster service calls.
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
,Fujitsu FO3617CTJCBA
Fujitsu FO3617CTJCBA
Item#:
FO3617CTJCBA
Manufacturer Item:
FO3617CTJCBA
Manufacturer:
FUJITSU(UNITARY)
Fujitsu FO3016CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 2-1/2 Ton
- New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
- Better coat paint system for a long lasting professional finish.
- Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
- Modern cabinet aesthetics increased curb appeal with visually appealing design.
- Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
- Optimized fan orifice optimizes airflow and reduces unit sound.
- Rust resistant screws confirmed through 1500-hour salt spray testing.
- 3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
- 15" wide, industry leading corner service access makes repairs easier and faster.
- External gauge port access allows easy connection of low-loss gauge ports.
- Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
- Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
- Service trays hold fasteners or caps during service calls.
- QR code provides technical information on demand for faster service calls.
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
,FUJITSU FO3016CSJNA
FUJITSU FO3016CSJNA
FO2417CTJCBA
Item#:
FO2417CTJCBA
Manufacturer Item:
FO2417CTJCBA
Manufacturer:
FUJITSU(UNITARY)
Fujitsu FO1816CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 1-1/2 Ton
- New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
- Better coat paint system for a long lasting professional finish.
- Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
- Modern cabinet aesthetics increased curb appeal with visually appealing design.
- Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
- Optimized fan orifice optimizes airflow and reduces unit sound.
- Rust resistant screws confirmed through 1500-hour salt spray testing.
- 3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
- 15" wide, industry leading corner service access makes repairs easier and faster.
- External gauge port access allows easy connection of low-loss gauge ports.
- Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
- Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
- Service trays hold fasteners or caps during service calls.
- QR code provides technical information on demand for faster service calls.
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
,Fujitsu FO1816CSJNA
Fujitsu FO1816CSJNA
INTERNATIONAL COMFORT PRODUCTS FEM4P4200AL
Item#:
FEM4P4200AL
Manufacturer Item:
FEM4P4200AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
INTERNATIONAL COMFORT PRODUCTS FEM4P3000AL
Item#:
FEM4P3000AL
Manufacturer Item:
FEM4P3000AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Gray Pre-Painted Galvanized Cabinet Sheet Metal Cabinet Upflow/Downflow/Horizontal Multi-Position Type A Evaporator Fan Coil with EC Motor and TXV Metering,
- Communicating, self configuring when used with observer communicating wall control
- Smart diagnostic for easier troubleshooting
- Bi-flow hard-shutoff R-410A TXV metering device
- HUD approved for manufactured housing
- Primary and secondary brass drain connections
- Energy efficient variable speed ECM motor
- Ultra - low power consumption during fan only operation
- High duct static capability
- Pre-painted Galvanized sheet metal cabinet insulation with vapor barrier
- Cabinet construction designed to prevent cabinet sweating
- Meets requirements of a 2% cabinet leakage rate when tested at 1" WC of static pressure
- Modular cabinet on 5 Ton model
- Multiple electrical entry for application flexibility
- Low VAC age terminal strip
- Easy plug connection provided for quick installation of accessory heater packages
- Factory supplied washable filter easily removed - no tools required
International Comfort Products FCM4X2400AL
Item#:
FCM4X2400AL
Manufacturer Item:
FCM4X2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
HORIZONTAL FAN COILS
FMU4Z and FMC4Z 11/2, 2, 21/2, and 3 Tons
FMU4X and FMC4X 11/2, 2, 21/2, and 3 Tons
Horizontal application only
Accessory fieldinstalled electric heat kits available in 3, 5, 6, 7.5, or 10 kW
40 VA 208/230v160 transformer
All Models use R410A TXV metering device
Adjustable condensate drainpan
FMC4X & FMC4Z
Horizontal return applications require field fabricated bottom cover
Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193
Cabinets constructed to prevent cabinet sweating
Refrigerant lines and electrical connections can be run out the back or side of casing
PERFORMANCE
PSC motor on all FMU4X & FMC4X models
ECM motor on all FMU4Z & FMC4Z models
EASY TO INSTALL AND SERVICE
Acoil design for maximum surface area
Multiple electrical, refrigerant lineset and drain line entry for application flexibility
Primary and secondary drain connections exit from the back or side of the cabinet
Supports furreddown ceiling open return and ducted return applications
Sweat connections for long term reliability
Grooved aluminum tube / aluminum fin coils on FMU4X & FMC4X models with AL in the 10th & 11th position
International Comfort Products FMU4X2400AL
Item#:
FMU4X2400AL
Manufacturer Item:
FMUX2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS