Bell & Gossett B138-LF F3 Brass Dual Unit Valve 1/2" NPT 30 PSI Relief x 12 PSI Reducing

Bell & Gossett B138-LF

Watts Regulators series 1450F dual controls regulator and relief Valve are for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, an attached iron body, diaphragm relief valve, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Series 1450F has high capacity performance and simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems.

• Combination fill valve and safety pressure relief valve
• Tight seating check valve
• Purge lever for manual purging
• High capacity
• Stainless steel strainer to protect the valve disc from fouling
• 15 psi set and 30 psi relief valve setting

Sid Harvey Item #:B144-1: Replaces Part #:'s : 2K402,
,

Watts Water B144-1

Watts Regulators series 1450F dual controls regulator and relief Valve are for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, an attached iron body, diaphragm relief valve, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Series 1450F has high capacity performance and simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems.

• Combination fill valve and safety pressure relief valve
• Tight seating check valve
• Purge lever for manual purging
• High capacity
• Stainless steel strainer to protect the valve disc from fouling
• 100 psi working , 15 psi set and 30 psi relief valve setting

Sid Harvey Item #:B144-2: Replaces Part #:'s : R54-740,
,

Watts Water B144-2

Watts Water B911S Bronze Combination Fill Valve Feeder and Backflow Preventer, 1/2" Sweat

• Pre-assembled for ease of installation
• Easy service accessibility
• High capacity fill valve for quick system filling and purging
• All bronze body construction union solder x NPT connections
• Installed on the boiler feed line to provide make-up water to the boiler
• The valve shall contain a watts regulator model 9D backflow preventer and model 1156 feed water pressure regulator

Sid Harvey Item #:B911S: Replaces Part #:'s : 2K412,
,

Watts Water B911S

Watts Water B911 Bronze Combination Fill Valve Feeder and Backflow Preventer, 1/2" Threaded

• Pre-assembled for ease of installation
• Easy service accessibility
• High capacity fill valve for quick system filling and purging
• All bronze body construction union NPT x NPT connections
• Installed on the boiler feed line to provide make-up water to the boiler
• The valve shall contain a watts regulator model 9D backflow preventer and model 1156 feed water pressure regulator

,
,

Watts Water B911T

Resideo Braukmann DS06 Dial Set Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static pressure only).

• Built-In Dial-Set- no gauge is needed to install or set static pressure
• Built-in strainer to simplify maintenance
• Fabric reinforced diaphragm regulator, stainless steel and engineered thermoplastics internal parts
• Balanced single seat construction
• Minimum pressure differential between inlet and outlet ports is 14.5 psig
• Plus or minus 4 psig dial calibration
• Less than 0.25% of weighted average of low lead content
• 1/4" NPT gauge tap
• 10:1 maximum reduction ratio
• Double union sweat union fittings

,
,

Resideo Braukmann DS06-101-DUT-LF

Taco boiler feed valves automatically feed water to a system whenever pressure in the system drops below the pressure setting of the valve. The dual control models combine the boiler feed with an in-line pressure relief valve. The built-in check prevents emptying the system if incoming pressure falls. They feature fast fill rates and an exclusive, lockable fast fill lever. Taco boiler feed valves have set the standards for dependable service. Each valve is adjustable from 10 - 25 psi, has a built-in check to prevent the emptying of the system if incoming pressure fails, and the easy to use fast fill lever is lockable.

• Fast fill rate on all models
• Exclusive fast fill lever lock
• Built-in check to prevent emptying the system if incoming pressure fails
• Pressure setting adjustment separated from fast fill lever for easy, fast adjustment
• 100 psi maximum supply side pressure, 12 psi factory setting of system side

Sid Harvey Item #:B143-13: Replaces Part #:'s : B138-12A | B143-13R | B144-5,
,

Taco B143-13

Watts Water 1156F-P Reducing Valve 1/2" FPT,
,

Watts Water 1156F-P

Taco 329-3 Cast Iron Boiler Feed Pressure Reducing Valve, 1/2", Sweat Taco boiler feed valves automatically feed water to a system whenever pressure in the system drops below the pressure setting of the valve. The dual control models combine the boiler feed with an in-line pressure relief valve. The built-in check prevents emptying the system if incoming pressure falls. They feature fast fill rates and an exclusive, lockable fast fill lever. Taco boiler feed valves have set the standards for dependable service. Each valve is adjustable from 10 - 25 psi, has a built-in check to prevent the emptying of the system if incoming pressure fails, and the easy to use fast fill lever is lockable.Sid Harvey Item #:329-3: Replaces Part #:'s : L41-607,

,

Taco 329-3

Taco boiler feed valves automatically feed water to a system whenever pressure in the system drops below the pressure setting of the valve. The dual control models combine the boiler feed with an in-line pressure relief valve. The built-in check prevents emptying the system if incoming pressure falls. They feature fast fill rates and an exclusive, lockable fast fill lever. Each valve is adjustable from10 to 25 psi, has a built-in check to prevent the emptying of the system if incoming pressure fails, and the easy to use fast fill lever is lockable.

• Fast fill rate
• Exclusive fast fill lever lock
• Built-in check to prevent emptying the system if incoming pressure fails
• Pressure setting adjustment separated from fast fill lever for easy, fast adjustment
• 100 psi maximum supply side pressure, 30 psi relief valve setting, 12 psi factory setting

Sid Harvey Item #:335-3: Replaces Part #:'s : L41-608,
,

Taco 335-3

Caleffi 573002A Auto Fill Pre-Adjustable Automatic Combination Fill Valve, Brass Pre-Adjustable Automatic Combination Fill Valve and Backflow Preventer, 1/2" FPT,
,

Caleffi 573002A