Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Baso Y9 series inlet fittings control the flow of gas to a pilot burner and are designed to be used with baso pilot burners. The majority of baso inlet fittings have two holes which control and direct the flow of gas to the burner. The gas flow from the two holes intersects. This unique feature causes turbulence and a better gas/air mixture for proper combustion.

Honeywell VR8304P4504/U 1-Stage Intermittent Pilot/Spark Natural Step-Opening Combination Gas Control Valve, 3/4"

Honeywell VR8300A3500/U Combination Gas Control Valve, 1/2 x 3/4", 30000 - 290000 BTU

Honeywell VR8300A4508/U Combination Gas Control Valve, 3/4", 30000 - 300000 BTU

Controls includes safety shut-off, manual valve, (2) automatic operators, pressure regulator and pilot adjustment
• Compact size
• Provides (2) automatic valves
• Solenoid operated first automatic valve opens on thermostat call for heat, closes when call for heat ends
• Diaphragm operated second automatic valve opens under control of the regulator, closes if gas or power supply is interrupted
• Meets codes requiring dual safety shut-off
• Natural to LP and LP to natural conversion kits available for standard and slow opening gas valves
• All adjustments, wiring connections and pilot outlet are accessible from top of gas control
• Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure
• Compatible with ECO connector
• Lite-Rite (off-pilot-on) lighting sequence
• Includes natural to LP conversion kit, (2) 3/4 x 1/2" reducer bushing
• 0 - 90 deg in any direction from the upright position of the gas control knob, including vertically mounting
• Straight-through with flange body pattern
• Standard pressure regulator
• Mounting: 0 to 90 degs in any direction from the upright position of the gas control knob, including vertically
  

The Robertshaw 700 Series Combination Gas Valves offer replacement flexibility. With three-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 Volt Uni-Kit models are suitable for either natural or LP gas. The valve is factory set at 3.5" WC natural gas. A regulator cover plate is included to convert to LP gas.

Robertshaw Controls G566-60 Hot Surface Ignition Control Module 780-34NL306A

The L62 series Baso safety shutoff devices are for use on all gas-fired, standing pilot equipment that requires main burner shutoff when the pilot is extinguished. Typical applications include domestic central heating and commercial space heating appliances, as well as industrial processing equipment (for example, die-casting machines and degreasers). Monitor the pilot flame through the use of a thermocouple. If the pilot flame is extinguished, the switch will interrupt gas flow to the main burner and pilot burner, shutting down the appliance.

The L62 has a manual reset feature, and is available in models with or without 100% shut-off
• The L62 has a thermo-electric power unit assembly that receives its energy from a heated thermocouple
• If the pilot flame is extinguished, the main valve circuit is interrupted and gas flow to the main burner (and pilot burner in 100% shut-off model L62GB) is stopped
• Both L62 models contain an electric interruption feature that only allows pilot gas flow during the lighting or resetting cycle
• When lighting the pilot, the main valve electrical circuit is interrupted until the pilot flame is established and the reset butTon is released
• Allows only pilot gas flow during lighting cycle
• 1 conduit opening
  

The Robertshaw 710 series low capacity gas valves feature an extremely compact control designed for low capacity and limited space applications. Features include 3-position outlets, multi-positional capability and component replaceability.

White Rodgers Cooling Controls 3046-5 Mercury Flame Sensor, 2-1/16" W x 2-3/4" H x 1-7/8" D

Contacts close approximately 60 sec after pilot is ignited, open approximately 40 sec after flame is extinguished
• Prevent gas flow to main burner if pilot flame is not burning or is insufficient to properly ignite main burner
• These sensors combine a rugged snap-action switch and powerful mercury actuated thermal element
• Used with natural, manufactured or mixed gases and with LP gases where means are provided for obtaining automatic pilot gas shut-off
• Switch may be conveniently mounted in any position
• Cover is easily removed, making switch terminals readily accessible
• No button to depress - sensors are recycling type which require relighting or possible restoration of proper gas pressure to return to operation
• 90 VA at 30 VAC, 125 VA at 120 and 240 VAC electrical rating
  

White Rodgers Cooling Controls 30A46-5 Plug-In Mercury Flame Sensor, 120/240/30 VAC, 48" Element

Plug-in feature requires no additional electrical connections or mounting devices
• Sensor combines a rugged snap-action SPDT switch and powerful mercury actuated thermal element
• May be used with natural, manufactured or mixed gases and with LP gases where means are provided for obtaining automatic pilot gas shut-off
• No button to depress sensors are recycling type which require relighting or possible restoration of proper gas pressure to return to operation
• The SPDT switch can energize igniter circuit to relight pilot (as with roof top units)
• Contacts close approximately 60 sec after pilot is ignited
• Open approximately 40 sec after flame is extinguished
• Stud mount element
  

Baso J999MKA-2 Universal 1-Stage Multi-Mount Shell Type Head Standing Pilot Burner for Ignition Systems