Jard JFR-342 Fan Relay, 208/240 volt Coil, DPDT

• Contact rating: 72 amp at 120 volt, 36 amp at 277 volt, 18 amp at 480 volt locked rotor inrush; 15 amp at 120/277 volt, 10 amp at 480 volt resistive; 12 amp at 120 volt, 6 amp at 277 volt, 3 amp at 480 volt inductive full load

Sid Harvey Item #:R540-85: Replaces Part #:'s : L36-903,
,

Jard R540-85

Jard JFR-341 Fan Relay, 120 volt Coil, DPDT

• Contact rating: 72 amp at 120 volt, 36 amp at 277 volt, 18 amp at 480 volt locked rotor inrush; 15 amp at 120/277 volt, 10 amp at 480 volt resistive; 12 amp at 120 volt, 6 amp at 277 volt, 3 amp at 480 volt inductive full load

Sid Harvey Item #:R540-80: Replaces Part #:'s : 3R341,
,

Jard R540-80

Schneider Electric 8910DP31V14 DIN Mount Continuous Duty 1-Pole 1-PH Definite Purpose Contactor, 24 VAC at 50/60 Hz, 30 amp, 1 NO

• 40 amp resistive, 150 amp at 277 VAC, 125 amp at 460 VAC, 100 amp at 575 VAC locked rotor

Sid Harvey Item #:R540-30B: Replaces Part #:'s : 12195,

,

Schneider Electric R540-30B

Honeywell R845A1030/U Enclosed Intermediate Switching Relay, 120 volt Input, 24 VAC Coil at 50/60 Hz, 0.4 amp Coil, DPST

• Provide intermediate switching of a line voltage device from a low voltage controller
• Integral transformer provides low voltage power for control circuit
• Includes enclosure
• Contact rating: full load - 7.4 amp at 120 VAC, 3.7 amp at 240 VAC; 3 amp at 120 VAC, 2 amp at 240 VAC secondary; locked rotor - 44.4 amp at 120 VAC, 22.2 amp at 240 VAC; 18 amp at 120 VAC; 12 amp at 240 VAC secondary; resistive - 10 amp at 120 VAC; 6 amp at 240 VAC; 2000 VA (120 - 240 VAC)

Sid Harvey Item #:R520-32: Replaces Part #:'s : R520-32R,
,

Honeywell R520-32

ICM Controls ICM201 Delay-On-Make Timer, 18 - 30 VAC , 1.5 amp

• Compressor lockout/anti-short cycle timer
• Helps to protect compressors from damage caused by rapid short cycling
• Simple, 2-wire hook-up
• Fixed timing
• Direct replacement for Mars 32390, Diversified ASC-500-5, A1 Components EAC-500/EAC-501-300-W, Supco TD735 (18-30 VAC )

,
,

ICM Controls R614-40

Honeywell RA832A1066 Switching Relay with Internal Transformer, 120 volt Input, 24 VAC Coil at 50/60 Hz, 0.4 amp Coil, DPST

• Provide intermediate switching of a line voltage device from a low voltage controller
• Integral transformer provides low voltage power for control circuit
• Includes enclosure
• Contact rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor; 10 amp at 120 VAC, 6 amp at 240 VAC resistive; 2000 VA (120 - 240 VAC); secondary DC - 1 amp at 12 VDC, secondary millivolt - 300 milli-amp at 750 mV

Sid Harvey Item #:R520-26: Replaces Part #:'s : R520-26R,
,

Honeywell R520-26

Honeywell RA89A1074 Switching Relay, 120 volt Input, 24 VAC Coil at 50/60 Hz, 0.4 amp Coil, SPST

• Provide intermediate switching of a line voltage device from a low voltage controller
• Integral transformer provides low voltage power for control circuit
• Includes enclosure
• Contact rating: 10.2 amp at 120 VAC, 5.1 amp at 240 VAC full load; 61.2 amp at 120 VAC, 30.6 amp at 240 VAC locked rotor; 10 amp at 120 VAC, 6 amp at 240 VAC resistive

Sid Harvey Item #:R510-15: Replaces Part #:'s : R510-15R,
,

Honeywell R510-15

IDEC Systems & Controls SH2B-05 8-Pin DIN Rail Mount Relay and Timer Socket, 300 volt, 10 amp

• Compact midget size saves space
• High switching capacity
• Comes with two horseshoe clips
  ,
  ,
  

  Idec Relays SH2B-05

Taco switching relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. Whether using basic priority switching or the advanced features of the -ExP controls, the job is made easy. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are UL listed, are compatible with conventional and programmable thermostats.

• External indicator lights
• Plug-In power port cards
• Switchable priority
• Simplified wiring
• Fully enclosed snap-out relays
• Compact design
• Fuse protected
• 100% factory tested
• Isolated end switch
• Contractor friendly PC board layout
• Universal thermostat compatibility
• All circulator relay connections, including ZC/ZR, are rated 1/3 HP (6 amp full load, 36 amp locked rotor) at 120 VAC
• End switch connections are rated 24 VAC, 1 amp
• All thermostat connections supply a 24 VAC class 2 output

,

,

Taco SR506-EXP-4

Taco SR501-4 1-Zone Switching Relay, 120 VAC at 60 Hz, 12 amp

• External indicator lights
• Universal replacement
• Snap-in PC board
• Simplified wiring
• Fuse protected outputs
• 100% factory tested
• Contractor friendly PC board layout
• Universal thermostat compatibility
• All circulator relay connections rated 1/3 HP (6 amp full load, 36 amp locked rotor) at 120 VAC
• Thermostat connection supplies a 24 VAC class 2 output

Sid Harvey Item #:SR501: Replaces Part #:'s : 5C955,
,

Taco SR501

Taco SR504-4 switching relay is the best choice for all your zoning needs, with advanced powerport cards, External diagnostic lights, switchable priority and contractor friendly PC board layouts. Combined with the time proven reliability of the 00 family of circulators and thermostats, total system integrating is achieved. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups.

• External indicator lights
• Switchable priority
• Priority protection
• Simplified wiring
• Sealed relays
• Fuse protected outputs
• Compact design
• 100% factory tested
• Isolated end switch
• Contractor friendly PC board layout
• Universal thermostat compatibility
• All circulator relay connections, including ZC/ZR, are rated 1/3 HP (6 amp full load, 36 amp locked rotor) at 120 VAC
• End switch connections are rated 24 VAC, 1 amp
• All thermostat connections supply a 24 VAC class 2 output

Sid Harvey Item #:SR504: Replaces Part #:'s : SIDSSR504,
,

Taco SR504