Compare

Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Rugged Steel Cabinet Construction: Designed for added strength and versatility

Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

Fujitsu FHFSTT2421SJZTNAB08

Item#:

FHFSTT2421SJZTNAB08

Manufacturer Item:

FHFSTT2421SJZTNAB08

Manufacturer:

FUJITSU

FHFSTT2421SJZTNAB08_Spec

Compare

Air Handler 3 Ton 1-Stage PSC Motor R410A

Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Rugged Steel Cabinet Construction: Designed for added strength and versatility

Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

Fujitsu FHRNPS3617SAZTNA

Item#:

FHRNPS3617SAZTNA

Manufacturer Item:

193331

Manufacturer:

FUJITSU

FHRNPS3617SAZTNA_Broc

Compare

Air Handler 2 Ton 1-Stage PSC Motor Front Return R410A

Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Front or Bottom Return with Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Rugged Steel Cabinet Construction: Designed for added strength and versatility

Most Compact Unit Design Available: All standard air handler models are only 36" [915mm] in height

Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect

Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

Fujitsu FHFSPS2421SJZTNAB10

Item#:

FHFSPS2421SJZTNAB10

Manufacturer Item:

FHFSPS2421SJZTNAB10

Manufacturer:

FUJITSU

FHFSPS2421SJZTNAB10_Spec

Compare

Air Handler 3 Ton 2-Stage Constant Torque R410A 21" W x 50-1/2" x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper Stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHSMTT3621SAZTNAN00

Item#:

FHSMTT3621SAZTNAN00

Manufacturer Item:

FHSMTT3621SAZTNAN00

Manufacturer:

FUJITSU

FHSMTT3621SAZTNAN00_Spec

Compare

Air Handler Multi-Position TXV3-1/2 Ton 208/230 R410A ECM Motor Installed Metering Device 42-11/16" H x 14-15/16" W x 22" D

Standard Features

Limited Warranty*

Multi-tap ECM (electronic commutating motor) motors - all sizes

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Cabinet construction features innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.

Installation-flexible, multipoise units

Horizontal hanging provisions on cabinet

No tools required to access filter

Newly improved filter rack area filter door insulation added for improved air seal

3- through 30-kW accessory heaters - field installed

Factory-supplied power plug

Easy plug-in provisions for heater installation

Entry options for high and low voltage wiring hook-up

Leak-preventing sweat connections

Thermostatic expansion valve, TXV, on all sizes

Designed for manufactured housing applications

International Comfort Products FJMA4B42L0CB

Item#:

FJMA4B42L0CB

Manufacturer Item:

FJMA4B42L0CB

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FJMA4B42L0CB_Spec

Compare

Air Handler Multi-Position 2.5 Ton ECM R454B TXV 21" Singlar

Refrigerant leak detection dissipation system for added safety

Multi-tap ECM (electronic commutating motor) motors all sizes

Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board

Five available speed tags to meet a wide range of applications

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Construction innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Pre-painted galvanized steel cabinet

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations

Horizontal hanging provisions on cabinet

Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter

Easy plug-in provisions for heater installation

Factory installed thermostatic expansion valve, TXV, on all coils

Designed for manufactured housing applications

International Comfort Products FHMA5X30L0BA

Item#:

FHMA5X30L0BA

Manufacturer Item:

FHMA5X30L0BA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHMA5X30L0BA_Broc

Compare

Air Handler 4 Ton 3-Stage ECM Motor

Constant CFM Motor: When paired with the EcoNet® Smart Thermostat, the motor gradually auto-adjusts from low capacity to 100% of capacity to meet comfort requirements allowing for ultimate humidity control, quieter sounds levels and year-round energy savings When paired with a 24V two-stage thermostat, the air handler runs in 3-speeds to match airflow with outdoor unit

Diagnostics Easy & Quick Diagnostics & Ongoing Monitoring with Bluetooth®2 Technology & EcoNet®: With the BluArch & EcoNet® Apps, built-in technology makes monitoring, troubleshooting and repairing the product easier than ever before The Fujitsu Line with the BluArch App via Bluetooth® technology, features up to 62% faster overall diagnostics over other residential HVAC brands1

No Dip Switches = Fast Seamless Final Installation: The Fujitsu Line, with BluArch App-based commissioning via Bluetooth® technology, features up to 54% faster installation over other residential HVAC brands*

New Fujitsu Air Handler Control Board (AHC): Enables constant CFM airflow Introduces Bluetooth® connectivity for access to advanced diagnostic information from the Contractor App on your mobile device Maintains EcoNet® diagnostics for remote access when shared by the homeowner

Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Quieter Sound Levels: Provided by sturdy cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces

Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility

Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect

Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193

Fujitsu FHRNVV4821SJZTCA

Item#:

FHRNVV4821SJZTCA

Manufacturer Item:

FHRNVV4821SJZTCA

Manufacturer:

FUJITSU

FHRNVV4821SJZTCA_Spec

Compare

Air Handler 4 Ton Multipoise TXV R410A 120 VAC 21" PSC Motor 21" W x 50-1/2" H x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper Stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHRNPS4821SJZTNA

Item#:

FHRNPS4821SJZTNA

Manufacturer Item:

FHRNPS4821SJZTNA

Manufacturer:

FUJITSU

FHRNPS4821SJZTNA_Broc

FHRNPS4821SJZTNA_Spec

Compare

Air Handler 3 Ton 1-Stage R410A PSC Motor Front Return