Brand Name
Cased/Uncased
Tonnage
Refrigerant
Configuration
Coil Type
Length
Width
Height
BTU
|◀ ◀ 193 - 204 of 312 ▶ ▶|
View:

Evaporator Coil Cased 5 Ton W/Power-V Technology Multipoise

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM4X60M21A

    • Item#:
    EVM4X60M21A
    Manufacturer Item:
    EVM4X60M21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM4X

    Evaporator Coil Cased Upflow/Downflow W/TXV 2.5 Ton R410A Aluminum

  • Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,
      Copper tube/aluminum fin"N" coil with latest high - tech fin design
    • Bolt on TXV metering device factory installed on all models
    • (2) condensate drain connections
    • 5 years limited parts warranty
    • Sweat refrigerant line connection
    • All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
    • Aluminum hairpin
    • Sales digit (major revision)

      International Comfort Products END4X30L17

    • Item#:
    END4X30L17
    Manufacturer Item:
    END4X30L17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ENA4X-END4X_Spec

    Evaporator Coil Uncased Mobil Home Downflow 4 Ton W/TXV R410A Aluminum

  • Bolt-on TXV metering device factory installed on all models
  • (2) condensate drain connections
  • N evaporator design to keep height at a minimum
  • Shipped with condensate drain hose and trap
  • Shipped with fittings and adapter plates
  • Aluminum hairpin
  • 5 years parts limited warranty
  • Designed for mobile home down flow gas furnaces
  • Loose application

    International Comfort Products EMA4X48D

    • Item#:
    EMA4X48D
    Manufacturer Item:
    EMA4X48DAL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EMA4X_Spec

    Evaporator Coil Uncased Upflow/Downflow W/TXV 5 Ton R410A Aluminum

  • Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,
      Copper tube/aluminum fin"N" coil with latest high - tech fin design
    • Bolt on TXV metering device factory installed on all models
    • (2) condensate drain connections
    • 5 years limited parts warranty
    • Sweat refrigerant line connection
    • All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
    • Aluminum hairpin
    • Sales digit (major revision)

      Robertshaw C900-10

    • Item#:
    ENA4X60L24
    Manufacturer Item:
    ENA4X60L24A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ENA4X-END4X_Spec
    ENA4X-ICP_Spec

    Evaporator Coil Cased 2 Ton W/Power-V Technology Upflow/Downflow

  • Performance  Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • Thermostatic Expansion Valves (TXV)  All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • Durable Condensate Pan  The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort. Condensate Drain Pan Plugs  The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Refrigerant Connections  Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tubeonce the pipe swages are cut offto accommodate braze-less compression fittings.
  • Burst Pressure  Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling-only application.
  • UV Knockout  This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Serviceability  Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools

    International Comfort Products EVD4X24M14A

    • Item#:
    EVD4X24M14A
    Manufacturer Item:
    EVD4X24M14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ESD4X

    Evaporator Coil Cased Upflow/Counterflow W/Piston 2.5 Ton

    Armstrong Air Conditioning EC1P30BM-1 Evaporator Coil Cased Upflow/Counterflow W/Piston 2.5 Ton

    Armstrong Air Conditioning EC1P30BM-1

    Item#:
    EC1P30BM-1
    Manufacturer Item:
    1.911287
    Manufacturer:
    ALLIED AIR ENTERPRISES
     
    Armstrong-Evaporators_Spec

    Evaporator Coil Cased 4 Ton Muti-Position Standard Efficiency

    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

    Fujitsu Unitary FCCN4824SZEA

    • Item#:
    FCCN4824SZEA
    Manufacturer Item:
    FCCN4824SZEA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_SPEC

    Evaporator Coil Cased 5 Ton Muti-Position Standard Efficiency

    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

    Fujitsu Unitary FCCN6024SZEA

    • Item#:
    FCCN6024SZEA
    Manufacturer Item:
    FCCN6024SZEA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_SPEC

    Evaporator Coil Cased A Coil 2 Ton R410A W/TXV Standard Efficiency

  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refriger- ant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3 / 4 " [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units

    Fujitsu Unitary FCC2414TSA

    • Item#:
    FCC2414TSA
    Manufacturer Item:
    FCC2414TSA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_Spec

    Evaporator Coil Cased 2 Ton Muti-Position High Efficiency

    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

    Fujitsu Unitary FCCA2421HZEA

    • Item#:
    FCCA2421HZEA
    Manufacturer Item:
    FCCA2421HZEA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_SPEC

    Evaporator Coil Cased 5 Ton Muti-Position Standard Efficiency

    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

    Fujitsu Unitary FCCA6021SZEA

    • Item#:
    FCCA6021SZEA
    Manufacturer Item:
    FCCA6021SZEA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_SPEC

    Evaporator Coil Cased N Coil 3 Ton R410A W/TXV Standard Efficiency


    Fujitsu Unitary FCC3621TSA

    Item#:
    FCC3621TSA
    Manufacturer Item:
    FCC3621TSA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_Spec
    |◀ ◀ 193 - 204 of 312 ▶ ▶|
    View: