Room BTU Calculator

Room BTU Calculator

Select the room conditions to determine the required BTU.

BTU Result
|◀ 37 - 48 of 1699 ▶|
View:
  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV090LE2A0AAA

  • Item#:
    RGV090LE2A0AAA
    Manufacturer Item:
    RGV090LE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Features
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed
  • Powder coat paint system  for a long lasting professional finish
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design
  • Curved louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
  • Optimized fan orifice  optimizes airflow and reduces unit sound
  • Rust resistant screws  confirmed through 1500-hour salt spray testing
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access
  • 15" wide, industry leading corner service access  makes repairs easier and faster
  • External gauge port access  allows easy connection of low-loss gauge ports
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal
  • Service trays  hold fasteners or caps during service calls
  • QR code  provides technical information on demand for faster service calls
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

    Fujitsu FO1813CSJNA

  • Item#:
    FO1813CSJNA
    Manufacturer Item:
    FO1813CSJNAA
    Manufacturer:
    FUJITSU
  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV090HF3A0AAA

  • Item#:
    RGV090HF3A0AAA
    Manufacturer Item:
    RGV090HF3A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed
  • Powder coat paint system  for a long lasting professional finish
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design
  • Curved louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
  • Optimized fan orifice  optimizes airflow and reduces unit sound
  • Rust resistant screws  confirmed through 1500-hour salt spray testing
  • PlusOne Expanded Valve Space  3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access
  • PlusOne Triple Service Access  15" wide, industry leading corner service access  makes repairs easier and faster. The two fastener removable corner allows optimal access to internal unit components. Individual louver panels come out once fastener is removed, for faster coil cleaning and easier cabinet reassembly
  • Diagnostic service window with two-fastener opening  provides access to the high and low pressure.
  • External gauge port access  allows easy connection of low-loss gauge ports
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance
  • 35% fewer cabinet fasteners and fastener-free base  allow for faster access to internal components and hassle-free panel removal
  • Service trays  hold fasteners or caps during service calls
  • QR code  provides technical information on demand for faster service calls
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

    Weather King WA1418AJ1NAFGA

  • Item#:
    WA1418AJ1NAFGA
    Manufacturer Item:
    WA1418AJ1NAFGA
    Manufacturer:
    FUJITSU
  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness

    International Comfort Products FEM4P4800AL

  • Item#:
    FEM4P4800AL
    Manufacturer Item:
    FEM4P4800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness

    International Comfort Products FEM4P4200AL

  • Item#:
    FEM4P4200AL
    Manufacturer Item:
    FEM4P4200AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV072HFFA0AAA

  • Item#:
    RGV072HFFA0AAA
    Manufacturer Item:
    RGV072HFFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Features:
  • Outdoor air conditioner designed for ground level or rooftop installations. These units offer comfort and dependability for single, multi-family and light commercial applications.
  • Painted louvered steel cabinet
  • Easily accessible control box
  • Condenser coils constructed with copper tubing and enhanced aluminum fins.
  • Grille/Motor mount for quiet fan operation
  • Filter Drier (shipped  not installed)

    Fujitsu WA1342AJ1NAFGA

  • Item#:
    WA1342AJ1NAFGA
    Manufacturer Item:
    WA1342AJ1NAFGA
    Manufacturer:
    FUJITSU
  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness

    International Comfort Products FEM4P3000AL

  • Item#:
    FEM4P3000AL
    Manufacturer Item:
    FEM4P3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Features:
  • Outdoor air conditioner designed for ground level or rooftop installations. These units offer comfort and dependability for single, multi-family and light commercial applications.
  • Painted louvered steel cabinet
  • Easily accessible control box
  • Condenser coils constructed with copper tubing and enhanced aluminum fins.
  • Grille/Motor mount for quiet fan operation
  • Filter Drier (shipped  not installed)

    Fujitsu WA1336AJ1NAFGA

  • Item#:
    WA1336AJ1NAFGA
    Manufacturer Item:
    WA1336AJ1NAFGA
    Manufacturer:
    FUJITSU
    Features
  • New composite base pan  dampens sound, secures wire grille, eliminates corrosion and reduces number of fasteners needed
  • Improved tubing design  reduces vibration and stress, making unit quieter and reducing opportunity for leaks
  • Optimized defrost characteristics - decrease defrosting and provide better home comfort
  • Powder coat paint finish  for a long lasting professional finish
  • Optimized reversing valve sizing  improves shifting performance for quieter unit operation and increased life of the system
  • Enhanced mufflers  help to dissipate vibration energy for quieter unit operation
  • Scroll compressor  a sound abating feature added to the compressor significantly reduces noise when system transitions in and out of defrost mode
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design
  • Louver panels  provide ultimate coil protection, enhance cabinet strength and increase cabinet rigidity
  • Optimized fan orifice  optimizes airflow and reduces unit sound
  • Rust resistant screws  confirmed through 1500-hour salt spray testing
  • Service valve has between  3"-4"-5" valve space  provides a minimum working area of 27-square inches for easier access
  • Integrated heat pump lift receptacle  allows standard CPVC stands to be inserted into the base
  • 15" wide, industry leading corner service access  makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal
  • Service trays  hold fasteners or caps during service calls
  • QR code  provides technical information on demand for faster service calls
  • Fan motor harness with extra-long wires  allows unit top to be removed without disconnecting fan wire

    Fujitsu FO3615RSJNAA

  • Item#:
    FO3615RSJNAA
    Manufacturer Item:
    FO3615RSJNAA
    Manufacturer:
    FUJITSU
    Features:
  • Outdoor air conditioner designed for ground level or rooftop installations. These units offer comfort and dependability for single, multi-family and light commercial applications.
  • Painted louvered steel cabinet
  • Easily accessible control box
  • Condenser coils constructed with copper tubing and enhanced aluminum fins.
  • Grille/Motor mount for quiet fan operation
  • Filter Drier (shipped  not installed)

    Fujitsu WA1324AJ1NAFGA

  • Item#:
    WA1324AJ1NAFGA
    Manufacturer Item:
    WA1324AJ1NAFGA
    Manufacturer:
    FUJITSU
    |◀ 37 - 48 of 1699 ▶|
    View: