|◀ ◀ 385 - 396 of 1703 ▶ ▶|
View:

Air Condition Condenser 15 Ton 180K BTU 230/3 VAC

  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested



    International Comfort Products CAS151HAA0A00A

    • Item#:
    CAS181HAA0A00A
    Manufacturer Item:
    CAS181HAA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CAS0-ICP-Warranty_Misc
    CAS0-ICP_Install
    CAS0-ICP_Spec

    Air Condition Condenser 20 Ton 240K BTU 230/3 VAC 3-Stage

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested



    International Comfort Products CHS183LTA0A00A

    • Item#:
    CHS243HTA0A00A
    Manufacturer Item:
    CHS243HTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Spec
    CHS181-243_Install

    Air Condition Condenser 10 Ton 120K BTU 460/3 VAC 2-Stage

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested



    International Comfort Products CHS121HGA0A00A

    • Item#:
    CHS121LGA0A00A
    Manufacturer Item:
    CHS121LGA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Install
    CHS-ICP_Spec

    Air Condition Condenser 7-1/2 Ton 90K BTU 460/3 VAC

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested



    International Comfort Products CAS241HAA0A00A

    • Item#:
    CHS091LMA0A00A
    Manufacturer Item:
    CHS091LMA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Install
    CHS-ICP_Spec

    Air Condition Condenser 7-1/2 Ton 90K BTU 230/3 VAC

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested



    International Comfort Products CHS091HMA0A00A

    • Item#:
    CHS091HMA0A00A
    Manufacturer Item:
    CHS091HMA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Install
    CHS-ICP_Spec

    Air Condition Condenser 15 Ton 180K BTU 230/3 VAC 3-Stage

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested



    International Comfort Products CHS121LGA0A00A

    • Item#:
    CHS183HTA0A00A
    Manufacturer Item:
    CHS183HTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Spec
    CHS181-243_Install

    Air Condition Condenser 15 Ton 180K BTU 460/3 VAC 3-Stage

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested



    International Comfort Products CHS183HTA0A00A

    • Item#:
    CHS183LTA0A00A
    Manufacturer Item:
    CHS183LTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Spec
    CHS181-243_Install

    Air Condition Condenser 10 Ton 120K BTU 230/3 VAC 2-Stage

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested



    International Comfort Products CHS091LMA0A00A

    • Item#:
    CHS121HGA0A00A
    Manufacturer Item:
    CHS121HGA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Install
    CHS-ICP_Spec

    Air Conditioning Thru-The Wall Unit 8K BTU 120 VAC (No Sleeve)

    Friedrich Connect App
    Connect in minutes
  • Set a seven-day custom schedule that fits your lifestyle
  • Power units off and on, increase or decrease a unit's set point temperature, change system cool, fan, heat, and auto settings and fan speeds
  • With our advanced grouping program, you can control multiple units to work independently or as a single
  • system. You can even invite other users to manage one or more of your units
  • Quietmaster Technology
  • Steel inner wall and extra dense insulation blocks outdoor noise
  • Vibration isolating design and components reduce operating noise
  • Precision engineering delivers maximum air flow and air dispersion at low sound levels
  • Comfort & Convenience
  • Create customizable, 7-day schedules
  • 24-hour timer
  • Up to 4 cooling and 4 fan-only speeds on select models
  • Auto fan adjusts the fan speed to maintain the set temperature
  • Auto-changeover between cooling and heating modes (Kühl+ models except KEQ08)
  • Auto restart
  • 8-way air flow control for better air distribution
  • Control panel lockout (ON/OFF)



    Friedrich Air Conditioning KCL24A30A

    • Item#:
    KCQ08A10A
    Manufacturer Item:
    KCQ08A10A
    Manufacturer:
    FRIEDRICH AIR CONDITIONING CO.
     
    KCQ08A10A

    Package Gas/Electric 5 Ton 60K BTU Cooling 90K BTU Heating 208/230/1 R410A 52-3/4 x 48-3/16 x 44-1/8

  • Efficient single-stage scroll compressor
  • Efficient multi-speed ECM blower motor
  • Single-stage gas valve
  • Corrosion-resistant stainless steel heat exchanger
  • Reliable, direct spark gas ignition
  • System protecting highand low-pressure switches
  • Wire hail guard grille and raised coil design for protection against weather and debris
  • Corrosion-resistant tin-plated copper evaporator coil tubing
  • Sound reducing features: vibration-reducing top panel, soft mounted compressor and blower motor
  • Compatible thermostat: heat/cool with humidity sensing
  • Rooftop or ground level installation
  • Cooling capacity: 25 tons

    International Comfort Products PGD460090H001K

    • Item#:
    PGD460090H001K
    Manufacturer Item:
    PGD460090H001K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PGD4-ICP-Warranty_Misc
    PGD4-ICP_Install
    PGD4-ICP_Spec

    Package Gas/Electric 3 Ton 36K BTU Cooling 90K BTU Heating 208/230/1 R410A 51-3/4 x 48-3/16 x 32-5/8

  • Efficient single-stage scroll compressor
  • Efficient multi-speed ECM blower motor
  • Single-stage gas valve
  • Corrosion-resistant Stainless Steel heat exchanger
  • Reliable, direct spark gas ignition
  • System protecting high and low-pressure switches
  • Dense wire hail guard grille and raised coil design for protection against weather and debris
  • Corrosion-resistant aluminum coil design
  • Sound reducing features: vibration-reducing top panel, soft mounted compressor and blower motor
  • Compatible thermostat: heat/cool with humidity sensing
  • Rooftop or ground level installation
  • Cooling capacity: 25 tons
  • Heating capacity: 40,000130,000 BTU



    International Comfort Products PGD436090K000K

    • Item#:
    PGD436090K000K
    Manufacturer Item:
    PGD436090K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PGD4-ICP-Warranty_Misc
    PGD4-ICP_Install
    PGD4-ICP_Spec

    Package Roof Top Unit Gas/Electric 5 Ton Cooling 14 SEER 230/3 130K BTU 115K Heat

    REFRIGERATION CIRCUIT
  • Environmentally sound R410A refrigerant
  • Scroll compressor standard on all models
  • Copper tube/aluminum fin condenser and evaporator coils
  • Dehumidification mode (airflow reduction) on all models EASY TO INSTALL AND SERVICE
  • Installs easily on a rooftop or at ground level
  • Easy threepanel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination gas heating, heat pump heating, and electric cooling
  • Low NOx units available BUILT TO LAST
  • Hail guard (3/8 spacing) wire grilles standard on PDS models (2 spacing wire grilles on PDD models)
  • Induceddraft combustion and venting
  • Prepainted steel cabinet
  • Aluminized steel tubular heat exchanger on PDD4 models, Stainless Steel tubular heat exchanger on PDS4 models
  • Direct spark ignition
  • High efficiency ECM indoor blower motor on all models
  • Vertical condenser fan discharge
  • Full perimeter steel base rails
  • High and low pressure switches provide added reliability for the compressor
  • PDS4 models come with tincoated copper evaporator coil standard

    PGD460115H000K

    • Item#:
    PGD460115H000K
    Manufacturer Item:
    PGD460115H000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ ◀ 385 - 396 of 1703 ▶ ▶|
    View: