|◀ ◀ 1765 - 1776 of 1782 ▶ ▶|
View:

HEAT,PUMP,2-1/2T,230/1,14S

  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed
  • Powder coat paint system  for a long lasting professional finish
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design
  • Louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
  • Optimized fan orifice  optimizes airflow and reduces unit sound
  • Rust resistant screws  confirmed through 1500-hour salt spray testing
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access
  • 15" wide, industry leading corner service access  makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal
  • Service trays  hold fasteners or caps during service calls
  • QR code  provides technical information on demand for faster service calls
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

    Fujitsu FO3014RSJNA

    • Item#:
    FO3014RSJNA
    Manufacturer Item:
    FO3014RSJNAA
    Manufacturer:
    FUJITSU
     
    FO3014RSJNA_Spec

    Air Handler Multi-Position 4 Ton 208/230 TXV R410A ECM Motor 53-1/16" H X 24-11/16" L X 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    International Comfort Products FXM4X4800AL

    • Item#:
    FXM4X4800AL
    Manufacturer Item:
    FXM4X4800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install

    Heat Pump Condensing Unit 2-Stage 3 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll® Ultratech compressors on all models
  • Crankcase Heater factory installed
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • High and low pressure switches
  • Discharge gas thermostat
  • Copper tube / aluminum fin coil PERFORMANCE
  • Self configuring installation capabilities with Ion® System Control
  • Outdoor temperature sensor factory installed
  • Ball Bearing PSC Fan Motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets EASY TO INSTALL AND SERVICE
  • Text based diagnostics with the Ion® System Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • High gloss, bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products HCH636GK

    • Item#:
    HCH636GK
    Manufacturer Item:
    HCH636GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    HCA7-ICP-Care_Misc
    HCA7-ICP_Broc
    HCA7-ICP_Install
    HCA7-ICP_Spec

    Heat Pump Condensing Unit High Efficiency 4 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • High and Low pressure switches
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

    International Comfort Products NXH648GKP

    • Item#:
    NXH648GKP
    Manufacturer Item:
    NXH648GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    NXH6-ICP-Service_Misc
    NXH6-ICP_Broc
    NXH6-ICP_Install

    Heat Pump Condensing Unit High Efficiency 3.5 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • High and Low pressure switches
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

    International Comfort Products NXH642GKP

    • Item#:
    NXH642GKP
    Manufacturer Item:
    NXH642GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    NXH6-ICP-Service_Misc
    NXH6-ICP_Broc
    NXH6-ICP_Install
    NXH642GKP_Spec

    Heat Pump Condensing Unit High Efficiency 1.5 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • High and Low pressure switches
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

    International Comfort Products NXH518GKP

    • Item#:
    NXH518GKP
    Manufacturer Item:
    NXH518GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    NXH5-ICP-Service_Misc
    NXH5-ICP_Broc
    NXH5-ICP_Install
    NXH5-ICP_Spec

    Heat Pump Condensing Performance Series 3.5 Ton

    Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Gallonvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection

    International Comfort Products N4H442GKP

    • Item#:
    N4H442GKP
    Manufacturer Item:
    N4H442GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4H4-ICP-Wiring_Misc
    N4H4-ICP_Broc
    N4H4-ICP_Install
    N4H442GKP_Spec

    Tempstar Heat Pump Condensing Unit High Efficiency 2 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll Ultratecht compressors on all models
  • Crankcase Heater factory installed
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • High and low pressure switches
  • Discharge gas thermostat
  • Copper tube / aluminum fin coil PERFORMANCE
  • Self configuring installation capabilities with Observer Communicating Wall Control
  • Outdoor temperature sensor factory installed
  • Ball Bearing PSC Fan Motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
    EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • High gloss, baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products

    Tempstar TCH624GK

    • Item#:
    TCH624GK
    Manufacturer Item:
    TCH624GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TCH624GK_Spec

    Tempstar Heat Pump Condensing Unit High Efficiency 4 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll Ultratecht compressors on all models
  • Crankcase Heater factory installed
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • High and low pressure switches
  • Discharge gas thermostat
  • Copper tube / aluminum fin coil PERFORMANCE
  • Self configuring installation capabilities with Observer Communicating Wall Control
  • Outdoor temperature sensor factory installed
  • Ball Bearing PSC Fan Motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
    EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • High gloss, baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products

    Tempstar TSH648GKA

    • Item#:
    TSH648GKA
    Manufacturer Item:
    TSH648GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TSH648GKA_Spec

    Tempstar Heat Pump Condensing Unit High Efficiency 2.5 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll Ultratecht compressors on all models
  • Crankcase Heater factory installed
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • High and low pressure switches
  • Discharge gas thermostat
  • Copper tube / aluminum fin coil PERFORMANCE
  • Self configuring installation capabilities with Observer Communicating Wall Control
  • Outdoor temperature sensor factory installed
  • Ball Bearing PSC Fan Motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
    EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • High gloss, baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products

    Tempstar TSH630GKA

    • Item#:
    TSH630GKA
    Manufacturer Item:
    TSH630GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TSH630GKA_Spec

    Tempstar Heat Pump Condensing Unit High Efficiency 3.5 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll Ultratecht compressors on all models
  • Crankcase Heater factory installed
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • High and low pressure switches
  • Discharge gas thermostat
  • Copper tube / aluminum fin coil PERFORMANCE
  • Self configuring installation capabilities with Observer Communicating Wall Control
  • Outdoor temperature sensor factory installed
  • Ball Bearing PSC Fan Motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
    EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • High gloss, baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products

    Tempstar TSH642GKA

    • Item#:
    TSH642GKA
    Manufacturer Item:
    TSH642GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TSH642GKA_Spec

    Tempstar Heat Pump Condensing Unit High Efficiency 3 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll Ultratecht compressors on all models
  • Crankcase Heater factory installed
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • High and low pressure switches
  • Discharge gas thermostat
  • Copper tube / aluminum fin coil PERFORMANCE
  • Self configuring installation capabilities with Observer Communicating Wall Control
  • Outdoor temperature sensor factory installed
  • Ball Bearing PSC Fan Motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
    EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • High gloss, baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products

    Tempstar TSH636GKA

    • Item#:
    TSH636GKA
    Manufacturer Item:
    TSH636GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TSH636GKA_Spec
    |◀ ◀ 1765 - 1776 of 1782 ▶ ▶|
    View: