S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Room BTU Calculator
Select the room conditions to determine the required BTU.
BTU Result
Features
Environmentally Balanced Refrigerant Technology
R-410A, chlorine-free, non-ozone depleting refrigerant
Thermostatic Expansion Valve (TXV) designed to maximize
performance with R-410A refrigerant
Energy Efficient Operation
Variable Speed Constant Airflow ECM (Electronically Commutating
Motor) operates efficiently at all speeds
Maximizes efficiency of heating and cooling systems
Ultra low power consumption during fan only operation
Indoor Weather Control
Warm, comfortable heating air temperatures
Unmatched humidity control, especially with thermostat with relative
humidity controls
Airflow and Sound Technology
Diffuser air discharge section for high airflow efficiency and quiet,
smooth operation
High duct static capability
Design meets stringent regulations for cabinet air leakage of less than
2% when tested at 0.5 inches W.C., and cabinet air leakage less than
1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE
193 standard.
Condensate Control and Disposal Technology
Minimal standing waterless microbial growth for improved IAQ and
reduced condensate line clogging and related condensate leakage
Condensate fittings relocated away from turbulent airflow patterns at
the blower entrance for improved condensate control performance
Overflow feature for slope coil units allows condensate to exit the unit
without damage to product under clogged primary and secondary line
conditions
Tested for condensate disposal at conditions much more severe than
those required by AHRI
Primary and secondary drain connections to comply with HUD
All pans constructed of an injection molded glass-filled polycarbonate
engineered resin material, with brass drain connections.
High density, super thick cabinetry insulation with vapor barrier
Indoor Weather Control
engineered resin material, with brass drain connections.
International Comfort Products FTMA4B48L0CA
Item#:
FTMA4B48L0CA
Manufacturer Item:
FTMA4B48L0CA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features
Environmentally Balanced Refrigerant Technology
R-410A, chlorine-free, non-ozone depleting refrigerant
Thermostatic Expansion Valve (TXV) designed to maximize
performance with R-410A refrigerant
Energy Efficient Operation
Variable Speed Constant Airflow ECM (Electronically Commutating
Motor) operates efficiently at all speeds
Maximizes efficiency of heating and cooling systems
Ultra low power consumption during fan only operation
Indoor Weather Control
Warm, comfortable heating air temperatures
Unmatched humidity control, especially with thermostat with relative
humidity controls
Airflow and Sound Technology
Diffuser air discharge section for high airflow efficiency and quiet,
smooth operation
High duct static capability
Design meets stringent regulations for cabinet air leakage of less than
2% when tested at 0.5 inches W.C., and cabinet air leakage less than
1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE
193 standard.
Condensate Control and Disposal Technology
Minimal standing waterless microbial growth for improved IAQ and
reduced condensate line clogging and related condensate leakage
Condensate fittings relocated away from turbulent airflow patterns at
the blower entrance for improved condensate control performance
Overflow feature for slope coil units allows condensate to exit the unit
without damage to product under clogged primary and secondary line
conditions
Tested for condensate disposal at conditions much more severe than
those required by AHRI
Primary and secondary drain connections to comply with HUD
All pans constructed of an injection molded glass-filled polycarbonate
engineered resin material, with brass drain connections.
High density, super thick cabinetry insulation with vapor barrier
Indoor Weather Control
engineered resin material, with brass drain connections.
International Comfort Products FTMA4B60L0DA
Item#:
FTMA4B60L0DA
Manufacturer Item:
FTMA4B60L0DA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features
MaxAlloy coil
Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability
Next generation even-flow distributor
Designed for balanced refrigerant flow and even coil circuit performance
Next generation high-efficiency blower
Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor
Variable speed operation
Provides flexibility in application as well as upgraded system efficiency
Next generation insulation and gasket design
Reduces thermal transmission paths and reduces sweating
Electric heat kit
8HK field-installed series available for easy installation and service application
Two-stage operation
Provides flexibility in application with single-stage and two-stage outdoor equipme
Item#:
JHC24B5AC2SS1
Manufacturer Item:
JHC24B5AC2SS1
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
Features
MaxAlloy coil
Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability
Next generation even-flow distributor
Designed for balanced refrigerant flow and even coil circuit performance
Next generation high-efficiency blower
Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor
Variable speed operation
Provides flexibility in application as well as upgraded system efficiency
Next generation insulation and gasket design
Reduces thermal transmission paths and reduces sweating
Electric heat kit
8HK field-installed series available for easy installation and service application
Two-stage operation
Provides flexibility in application with single-stage and two-stage outdoor equipme
Item#:
JHC48C5CG2SS1
Manufacturer Item:
JHC48C5CG2SS1
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
Item#:
RE84948C175B2505AP
Manufacturer Item:
RE84948C175B2505AP
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
Multi-function micro-processor circuit board with these standard features:
Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air
handler
Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after
thermostat is satisfied, for increased efficiency
120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied
motorized zone valves
Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
Manual Air Vent on hot water coil
Blower door shut-off switch (except 60/61HCXW (PSC))
Slide out hot water coil for easier service
Copper tube heating and cooling coils
Compatible with all major brands of split condensing units and heat pumps
Attractive baked-on powder coated cabinet
Primary and secondary condensate drain connections
Easily accessible 1 filter
Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
24HCXW2V10AVB00AAF
Item#:
24HCXW2V10AVB00AAF
Manufacturer Item:
6024W2V10AVB00AAF
Manufacturer:
FIRST CO.
Multi-function micro-processor circuit board with these standard features:
Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air
handler
Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after
thermostat is satisfied, for increased efficiency
120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied
motorized zone valves
Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
Manual Air Vent on hot water coil
Blower door shut-off switch (except 60/61HCXW (PSC))
Slide out hot water coil for easier service
Copper tube heating and cooling coils
Compatible with all major brands of split condensing units and heat pumps
Attractive baked-on powder coated cabinet
Primary and secondary condensate drain connections
Easily accessible 1 filter
Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
24HCXW2010AVB00AAF
Item#:
24HCXW2010AVB00AAF
Manufacturer Item:
6024W2010AVB00AAF
Manufacturer:
FIRST CO.
Multi-function micro-processor circuit board with these standard features:
Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air
handler
Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after
thermostat is satisfied, for increased efficiency
120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied
motorized zone valves
Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
Manual Air Vent on hot water coil
Blower door shut-off switch (except 60/61HCXW (PSC))
Slide out hot water coil for easier service
Copper tube heating and cooling coils
Compatible with all major brands of split condensing units and heat pumps
Attractive baked-on powder coated cabinet
Primary and secondary condensate drain connections
Easily accessible 1 filter
Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
First Company 30HCXW2010AVB00AAF
Item#:
30HCXW2010AVB00AAF
Manufacturer Item:
6030W2010AVB00AAF
Manufacturer:
FIRST CO.
Multi-function micro-processor circuit board with these standard features:
Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air
handler
Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after
thermostat is satisfied, for increased efficiency
120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied
motorized zone valves
Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
Manual Air Vent on hot water coil
Blower door shut-off switch (except 60/61HCXW (PSC))
Slide out hot water coil for easier service
Copper tube heating and cooling coils
Compatible with all major brands of split condensing units and heat pumps
Attractive baked-on powder coated cabinet
Primary and secondary condensate drain connections
Easily accessible 1 filter
Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
36HCXW2010AVB00AAF
Item#:
36HCXW2010AVB00AAF
Manufacturer Item:
6036W2010AVB00AAF
Manufacturer:
FIRST CO.
Baked-On Powder Coated Hydronic Air Handler with TXV Metering
- Multi function micro-processor circuit board
- Blower start relay - eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
- Manual air vent on hot water coil
- Blower door shut-off switch
- Slide out hot water coil for easier service
- 2-speed fan operation
- Convertible horizontal drain pan
- PisTon type metering device (standard)
- Copper tube heating and cooling coils
- Compatible with all major brands of split condensing units and heat pumps
- Primary and secondary condensate drain connections
- Factory installed filter drier
- 1" filter easily accessible
- Without pump
First Company 48HCXB-HW-TXV410
Item#:
48HCXB-HW-TXV410
Manufacturer Item:
48HCXB-HW-TXV410
Manufacturer:
FIRST CO.
Baked-On Powder Coated Hydronic Air Handler with TXV Metering
- Multi function micro-processor circuit board
- Blower start relay - eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
- Manual air vent on hot water coil
- Blower door shut-off switch
- Slide out hot water coil for easier service
- 2-speed fan operation
- Convertible horizontal drain pan
- PisTon type metering device (standard)
- Copper tube heating and cooling coils
- Compatible with all major brands of split condensing units and heat pumps
- Primary and secondary condensate drain connections
- Factory installed filter drier
- 1" filter easily accessible
- Without pump
First Company 60HCXB-HW-R410A-TXV
Item#:
60HCXB-HW-R410A-TXV
Manufacturer Item:
6060H3HW4X
Manufacturer:
FIRST CO.
STANDARD Features
3-way airflow (except 60/61HCX)
Factory installed horizontal drain pan
Completely prewired with 0-25kW electric heat (except 0kW models)
Compatible with major brands of split condensing units and heat pumps (Contact factory for correct match with outdoor unit)
Piston-type metering device or factory or field installed TXV (non-bleed type) on cooling coil
Factory installed filter
Attractive baked on finish
Copper tube cooling coils
Primary and secondary drain connections on cooling coil
Fully insulated and painted galvanized steel cabinet
Factory installed disconnect switch (over 10kW models)
First Company 60HCXW3010BVB00AAF
Item#:
60HCXW3010BVB00AAF
Manufacturer Item:
6060W3010BVB00AAF
Manufacturer:
FIRST CO.