|◀ ◀ 145 - 156 of 1852 ▶ ▶|
View:

Air Handler Apartment Fan Coil Upflow Only 1-1/2 Ton Piston 208/230 R410A 36-1/2" H x 20-1/2" W x 15" D

  • 11/2, 2, 21/2, and 3 Tons

    Upflow application only

    Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW

    208/230160 supply voltage

    Cabinet exterior is galvanized sheet metal

    Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

    Insulated for conditioned space (not to be installed in unconditioned spaces)

    All Aluminum coils

    FMA4P

    For use with R410A refrigerant utilizing standard piston

    FMA4X

    R410A refrigerant, TXV standard

    PERFORMANCE

    PSC motor on all FMA4P

    ECM motor on all FMA4X

    Motor suspended on rubber grommets for quieter operation

    Fresh air intake knockouts in cabinet

    EASY TO INSTALL AND SERVICE

    Units fits between standard stud spacings

    All service access is located in the front

    Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet

    No returnair ductwork required in specific applications

    Wall hanging brackets included with the unit
    • Item#:
    FMA4X1800AL
    Manufacturer Item:
    FMA4X1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMAX COILS
    FMA4X1800AL_Spec

    P-Tac Unit 9K BTU Cooling 8,100 Heat 208/230/1 16" H x 42" W x 13-3/4" D

    Friedrich PZH09K34SB P-Tac Unit 9K BTU 208/230/1
    Item#:
    PZH09K34SB
    Manufacturer Item:
    PZH09K34SB
    Manufacturer:
    FRIEDRICH AIR CONDITIONING CO.
     
    PZH09K34SB_Spec

    Air Conditioning Condensing Unit Quiet Performance 1.5 Ton 15 SEER

    Efficiency
  • 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2  13.0 EER2 (11.2 - 13.0 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the ozone
  • layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N4A5S18AKAWA
    Manufacturer Item:
    N4A5S18AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4A5S-ICP-Care_Misc
    N4A5S-ICP_Broc
    N4A5S-ICP_Install
    N4A5S18AKAWA_Spec

    Package Roof Top Unit Gas 3 Ton 36K BTU 14 SEER 460/3 Medium Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    • Item#:
    RGV036LEFA0AAA
    Manufacturer Item:
    RGV036LEFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    RGVSERIES_Spec

    Evaporator Coil Cased Multipoise 4 Ton Alumium 24-1/2" TXV Installed

    Bosch BMAC2430ANTD Evaporator Coil Cased TXV Installed Multi-Position
  • The cased evaporator coils are constructed with heavy duty commercial grade powder-coated steel for durability.
  • Cased evaporator coils include easy-to-clean foil-back insulation which helps to ensure against energy loss through the cabinet as well as keeping the unit quiet.
  • All-Aluminum fins with aluminum tubing help to prevent formicary corrosion while maintaining the high heat transfer efficiency thereby increasing longevity and cost savings of the unit.
  • Boschs cased coil includes bottom and side drain pans so the unit can be mounted horizontally or vertically. The pans help reduce the build-up of mold, bacteria and airborne pollutants no matter the orientation. The pans are made of a strong recognized rated 94-5V (QMFZ2) plastic, and polyvinyl chloride (PVC) for strength and durability. For your protection, both drain pans have also been tested to resist UVC
    • Item#:
    BMAC4248DNTF
    Manufacturer Item:
    8733947955
    Manufacturer:
    BOSCH THERMOTECHNOLOGY CORP
     
    BMAC4248DNTF_Install
    BMAC4248DNTF_Spec

    Air Handler Multi-Position 3 Ton 208/230 TXV R410A ECM Motor 49-5/8" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    • Item#:
    FXM4X3600AL
    Manufacturer Item:
    FXM4X3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3600AL_Spec

    Condensing Unit Thru-The-Wall 4 Ton 13 SEER 208-230/3 23" H x 42" W x 18-1/2" D

    Aerosys Condenser Thru-The Wall
  • 4 Ton
  • 13 SEER
  • High Efficiency Scroll Compressor
  • Advanced Coil Design
  • Over Sized Direct Drive Blower
  • Two Screw Blower Slide Out
  • CNC Punched Safety Screen / Powder Coat
  • Non Corrosive Hardware
  • Powder Coated Cabinet
  • 230/3
    • Item#:
    TTWC-C48M23
    Manufacturer Item:
    TTWC-C48M23
    Manufacturer:
    AEROSYS INCORPORATED
     
    TTWC_Spec

    Air Handler Multi-Position 2-1/2 Ton 208/230 TXV R410A ECM Motor 53-7/16" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied


    • Item#:
    FXM4X3000AL
    Manufacturer Item:
    FXM4X3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3000AL_Spec

    Heat Pump Water Source Geothermal Right 42K BTU 208/230/1 13.1 EER R410A Vertical

    Heat Controller HBV042A3C30CRT Water Source Heat Pump 3 1/2 Ton 13.1 EER 208/230 VAC Right Return R410A,
    Item#:
    HBV042A3C30CRT
    Manufacturer Item:
    HBV042A3C30CRT
    Manufacturer:
    HEAT CONTROLLER LLC
     
    HBV042A3C30CRT_Broc
    HBV042A3C30CRT_Install
    HBV042A3C30CRT_Spec

    Condensing Unit Thru-The-Wall 2-1/2 Ton 19"H x 36"W x 18.5"D

    Above Air HK-OA ceiling mounted high-percentage outdoor-air A/Cs & H/Ps provide a floor saving above-the-ceiling ventilation solution
  • 2-1/2 Ton
  • Height 13"
  • Width 36"
  • Depth 13-1/2"
    • Item#:
    VCU-C-030-1-X
    Manufacturer Item:
    VCU-C-030-1-X
    Manufacturer:
    ABOVE AIR TECHNOLOGIES

    Air Conditioning Condensing Unit Quiet Performance 4 Ton 14 SEER

    Efficiency
  • 13.4 - 16.0 SEER2 (13.5 - 16.5 SEER)
  • 11.0  13.5 EER2 (11.0 - 14.5 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the ozone layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N4A4S48AKANA
    Manufacturer Item:
    N4A4S48AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4A4S-ICP-Service_Misc
    N4A4S-ICP_Install
    N4A4S-ICP_Spec

    Package Residential A/C Unit 3 Ton 36K BTU 208/230/1 14 SEER R410A Manufactured Housing & Residential Applications

  • REFRIGERATION CIRCUIT
  • Environmentally sound R-410A refrigerant
  • Liquid refrigerant filter driers
  • Copper tube/aluminum fin condenser and evaporator coils
  • EASY TO INSTALL AND SERVICE
  • Light weight, compact construction ideal for manufactured housing and residential applications
  • Hand holds built into the unit base pan
  • Compact, fully self-contained, electric cooling unit with horizontal supply and return ducts
  • Easy panel accessibility for maintenance and installation
  • Accessory electric heaters with single point connections
  • Designed to be serviced from both the side and front
    • Item#:
    PAJ436000K000K
    Manufacturer Item:
    PAJ436000K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PAJ4_SPEC
    |◀ ◀ 145 - 156 of 1852 ▶ ▶|
    View: