Air Handler 3 Ton Multipoise TXV R410A 120 VAC 1-Stage PSC

1.5 - 5 Tons

PSC Blower

EcoNet Enabled

TXV

Multi-Position

42 - 52 Tall

10-Year Warranty (With Registration)

Fujitsu FHRNPS3621SJZTNA

Item#:

FHRNPS3621SJZTNA

Manufacturer Item:

FHRNPS3621SJZTNA

Manufacturer:

FUJITSU

FHRNPS3621SJZTNA_Broc

Air Handler 4 Ton Multipoise TXV R410A 120 VAC 21" PSC Motor 21" W x 50-1/2" H x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHRNPS4821SJZTNA

Item#:

FHRNPS4821SJZTNA

Manufacturer Item:

FHRNPS4821SJZTNA

Manufacturer:

FUJITSU

FHRNPS4821SJZTNA_Broc

FHRNPS4821SJZTNA_Spec

Air Handler Non-Communicating 3 Ton 208/230 VAC 1 Stage Installed TXV ECM 21" W x 42-1/2" H x 22"

Fujitsu FH3621TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Fujitsu FH3621TPSJSN

Item#:

FH3621TPSJSN

Manufacturer Item:

FH3621TPSJSN

Manufacturer:

FUJITSU

FHTPS-Fujitsu_Broc

FHTPS-Fujitsu_Spec

FH3621TPSJSN_Spec

AIR HANDLER,4T, 1 STAGE PSC R410A

Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces

Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility

Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE Standard 193

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

FUJITSU FHRNPS4221SJZTNA

Item#:

FHRNPS4221SJZTNA

Manufacturer Item:

FHRNPS4221SJZTNA

Manufacturer:

FUJITSU

FHRNPS4221SJZTNA_Broc

Air Handler Heat Pump 20 Ton 230/3 R410A Horizontal Multi-Position and Vertical 56-1/16 H x 89 W x 283/16 L

Multiposition design for horizontal or vertical installation without modification

Two sloped condensate pans on each unit for horizontal or vertical applications

Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality

High-static design meets a wide range of applications than competitive package air handler lines

Economizer accessory provides ventilations air and free cooling

Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers

Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes

Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes

High efficiency copper tube / aluminum coils

Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element

Easy maintenance removal of single panel allows access to virtually all components

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available

24volt terminal block for control wiring connection.

Hot water coil, steam coil, and electric heat accessories are available.

International Comfort Products FHS240HAAA2AUA

Item#:

FHS240HAAA2AUA

Manufacturer Item:

FHS240HAAA2AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHS240HAAA2AUA_Spec

Air Handler Apartment Fan Coil Upflow Only 1.5 Ton 208/230 R545B ECM Motor TXV

1-1/2, 2, 2-1/2, and 3 Tons

Upflow application only

Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW

208/230/1/60 supply voltage

Cabinet exterior is galvanized sheet metal

Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

Insulated for conditioned space (not to be installed in unconditioned spaces)

All Aluminum coils

FMA4P

For use with R410A refrigerant utilizing standard piston

FMA4X

R410A refrigerant, TXV standard

PSC motor on all FMA4P

ECM motor on all FMA4X

Motor suspended on rubber grommets for quieter operation

Fresh air intake knockouts in cabinet

Units fits between standard stud spacings

All service access is located in the front

Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet

No returnair ductwork required in specific applications

Wall hanging brackets included with the unit

International Comfort Products FMA5X1800AL

Item#:

FMA5X1800AL

Manufacturer Item:

FMA5X1800AL

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FMA5-Series_Spec

Air Handler Non-Communicating 5 Ton 208/230 VAC 1 Stage Installed TXV ECM 21-1/2" W x 55-1/2" H x 22"

Fujitsu FH6021TTSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Fujitsu FH6021TTSJSN

Item#:

FH6021TTSJSN

Manufacturer Item:

FH6021TTSJSN

Manufacturer:

FUJITSU(UNITARY)

FH6021TTSJSN_SPEC

Air Handler 3 Ton 2-Stage Constant Torque R410A 21" W x 50-1/2" x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHSMTT3621SAZTNAN00

Item#:

FHSMTT3621SAZTNAN00

Manufacturer Item:

FHSMTT3621SAZTNAN00

Manufacturer:

FUJITSU

FHSMTT3621SAZTNAN00_Spec

Air Handler Multi-Position 3 Ton Constant Torque TXV 208/230 17-1/2" W x 42-1/2" H x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHRNTT3617SJZTNA

Item#:

FHRNTT3617SJZTNA

Manufacturer Item:

FHRNTT3617SJZTNA

Manufacturer:

FUJITSU

FHRNTT3617SJZTNA_Spec

Air Handler Commercial Heat Pump 10 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FHX120H2AA0AUA

Item#:

FHX120H2AA0AUA

Manufacturer Item:

FHX120H2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX120H2AA0AUA_Spec

AIR HANDLER,3T MULTI POS 115V CT MOTOR TXV

Front or Bottom Return with aluminum tube and fin coil

Flow Check Piston for cooling or heat pump operation

Wall-hanging brackets

Built in Filter Rack

AHRI Certified

UL Certified

Molex Plug Connections for field installed heater kits

Dual Voltage Direct Drive Blower with multi-speed motor

Thermoplastic Drain Pan with bottom primary and secondary connections

Optional Decorative Grill for front return applications

Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

FUJITSU FHRNTT3617SAZTNA

Item#:

FHRNTT3617SAZTNA

Manufacturer Item:

FHRNTT3617SAZTNA

Manufacturer:

FUJITSU

FHRNTT3617SAZTNA_Spec

Air Handler Commercial Heat Pump 7-1/2 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L