|◀ ◀ 1489 - 1500 of 1621 ▶ ▶|
View:

Evaporator Coil Cased Mult-Position A-Coil 2 Ton R410A >>LIMITED STOCK CLEARANCE ITEM<<

ALL MODELS:
  • 11/2 thru 5 Tons
  • Copper tube / aluminum fin A coil with latest hightech fin design
  • Bolton TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • Two condensate drain connections (EDM has additional two for horizontal installation)
  • 2piece delta plate for easier removal and cleaning CASED COILS
  • Upflow cabinet widths and horizontal cabinet depths match flush with ICP gas furnaces
  • Removable front access panel
  • Easy slideout coil for inspection
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Nonsweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, prepainted steel cabinet EDM
  • Multiposition installation  upflow, downflow, or horizontal
  • Available for R410A (EDM tincoated available for R22 systems)
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection EDD
  • Upflow or downflow installation
  • Available for R410A
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection UNCASED ACOILS
    EDA
  • Upflow or downflow installation
  • Available for R410A systems
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection

    International Comfort Products EDM4X24FAL

    • Item#:
    EDM4X24FAL
    Manufacturer Item:
    EDM4X24FAL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EDM4X-ICP_Spec

    Evaporator Coil Uncased Upflow/Downflow W/TXV 5 Ton R410A Aluminum >>LIMITED STOCK CLEARANCE ITEM<<

  • Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,
    • Copper tube/aluminum fin"N" coil with latest high - tech fin design
    • Bolt on TXV metering device factory installed on all models
    • (2) condensate drain connections
    • 5 years limited parts warranty
    • Sweat refrigerant line connection
    • All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
    • Aluminum hairpin
    • Sales digit (major revision)

      International Comfort Products END4X61L24

    • Item#:
    END4X61L24
    Manufacturer Item:
    END4X61L24A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ENA4X-END4X_Spec

    Evaporator Coil Cased Mult-Position A-Coil 3 Ton R410A >>LIMITED STOCK CLEARANCE ITEM<<

    ALL MODELS:
  • 11/2 thru 5 Tons
  • Copper tube / aluminum fin A coil with latest hightech fin design
  • Bolton TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • Two condensate drain connections (EDM has additional two for horizontal installation)
  • 2piece delta plate for easier removal and cleaning CASED COILS
  • Upflow cabinet widths and horizontal cabinet depths match flush with ICP gas furnaces
  • Removable front access panel
  • Easy slideout coil for inspection
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Nonsweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, prepainted steel cabinet EDM
  • Multiposition installation  upflow, downflow, or horizontal
  • Available for R410A (EDM tincoated available for R22 systems)
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection EDD
  • Upflow or downflow installation
  • Available for R410A
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection UNCASED ACOILS
    EDA
  • Upflow or downflow installation
  • Available for R410A systems
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection

    International Comfort Products EDM4X36FAL

    • Item#:
    EDM4X36FAL
    Manufacturer Item:
    EDM4X36FAL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EDM4X-ICP_Spec

    Evaporator Coil Cased Mult-Position A-Coil 4 Ton R410A >>LIMITED STOCK CLEARANCE ITEM<<

    ALL MODELS:
  • 11/2 thru 5 Tons
  • Copper tube / aluminum fin A coil with latest hightech fin design
  • Bolton TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • Two condensate drain connections (EDM has additional two for horizontal installation)
  • 2piece delta plate for easier removal and cleaning CASED COILS
  • Upflow cabinet widths and horizontal cabinet depths match flush with ICP gas furnaces
  • Removable front access panel
  • Easy slideout coil for inspection
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Nonsweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, prepainted steel cabinet EDM
  • Multiposition installation  upflow, downflow, or horizontal
  • Available for R410A (EDM tincoated available for R22 systems)
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection EDD
  • Upflow or downflow installation
  • Available for R410A
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection UNCASED ACOILS
    EDA
  • Upflow or downflow installation
  • Available for R410A systems
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection

    International Comfort Products EDM4X48L

    • Item#:
    EDM4X48L
    Manufacturer Item:
    EDM4X48LAL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EDM4X-ICP_Spec

    Air Handler 6 Ton Dual Circuit 230/3 CFM 2250-3750 4'-8" L x 2'-4" H x 3'-6-3/4" D

    Multi-position design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treatedwith Environmental Protection
    Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wider range of applications thancompetitive packaged air handler lines
  • Ultra low leak economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120-336 sizes
  • Dual circuit can be field modified for use on single circuit condensers
  • Cooling coils with mechanically bonded fins provide peak heat transfer
  • Optional 2-speed indoor fan with VFD controller
  • Standard factory-installed thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance - removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24-volt terminal block for control wiring connection
  • Hot water coil, steam coil, and electric heat accessories are available

    International Comfort Products FAS072HAAA2A0A

    • Item#:
    FAS072HAAA2A0A
    Manufacturer Item:
    FAS072HAAA2A0A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FAS072HAAA2A0A_Spec

    Air Handler 10 Ton 460/3 Unpainted 4'-8" L x 2'-4" H x 3'-6-3/4" D

    Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FAX120L2AA0AUA

    • Item#:
    FAX120L2AA0AUA
    Manufacturer Item:
    FAX120L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FAX120L2AA0AUA_Spec

    Air Handler 15 Ton Dual Circuit 230/3 Unpainted 7'-5" L x 2'-4" H x 4'-8" D

    Multi-position design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treatedwith Environmental Protection
    Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wider range of applications thancompetitive packaged air handler lines
  • Ultra low leak economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120-336 sizes
  • Dual circuit can be field modified for use on single circuit condensers
  • Cooling coils with mechanically bonded fins provide peak heat transfer
  • Optional 2-speed indoor fan with VFD controller
  • Standard factory-installed thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance - removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24-volt terminal block for control wiring connection
  • Hot water coil, steam coil, and electric heat accessories are available

    International Comfort Products FAS180HAAA2AUA

    • Item#:
    FAS180HAAA2AUA
    Manufacturer Item:
    FAS180HAAA2AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FAS180HAAA2AUA_Spec

    Air Handler 7-1/2 Ton 208/230/3 Unpainted 4'-8" L x 2'-4" H x 3'-6-3/4" D

    Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FAX091H2AA0AUA

    • Item#:
    FAX091H2AA0AUA
    Manufacturer Item:
    FAX091H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FAX091H2AA0AUA_Spec

    Air Handler 7-1/2 Ton 460/3 Unpainted 4'-8" L x 2'-4" H x 3'-6-3/4" D

    Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FAX091L2AA0AUA

    • Item#:
    FAX091L2AA0AUA
    Manufacturer Item:
    FAX091L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FAX091L2AA0AUA_Spec

    Air Handler 10 Ton 208/230/3 Unpainted 4'-8" L x 2'-4" H x 3'-6-3/4" D

    Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FAX120H2AA0AUA

    • Item#:
    FAX120H2AA0AUA
    Manufacturer Item:
    FAX120H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FAX120H2AA0AUA_Spec

    Air Handler 4 Ton Multipoise TXV R410A 120 VAC 21" PSC Motor 21" W x 50-1/2" H x 22" D

  • Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits
  • Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics
  • Coil design provides low air pressure drop, high performance, and extremely compact size
  • Less than 2% cabinet air leakage in accordance with ASHRAE standard 193
  • Field-installed electric heat kits from 5 kw  25 kw
  • Slide-out blower with ECM motor
  • R-410A TXV factory installed for heat pump or air conditioner
  • 4 leg blower motor mount
  • Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections
  • Air handlers are 230/1 Volts

    Fujitsu FHRNPS4821SJZTNA

    • Item#:
    FHRNPS4821SJZTNA
    Manufacturer Item:
    FHRNPS4821SJZTNA
    Manufacturer:
    FUJITSU
     
    FHRNPS4821SJZTNA_Broc
    FHRNPS4821SJZTNA_Spec

    AIR HANDLER,4T, 1 STAGE PSC R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces
  • Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FUJITSU FHRNPS4221SJZTNA

    • Item#:
    FHRNPS4221SJZTNA
    Manufacturer Item:
    FHRNPS4221SJZTNA
    Manufacturer:
    FUJITSU
     
    FHRNPS4221SJZTNA_Broc
    |◀ ◀ 1489 - 1500 of 1621 ▶ ▶|
    View: