S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Brand Name
Type
Length
Diameter
Z-Flex Z-Vent 2SVEPWCF0401 Single-Wall Pipe 4" x 24" Stainless Steel
- Gasketed connections
- Fusion welded pipe seams
- No sealant required, no cure time, or no call backs
- Air tight seam, smooth finish, better fit
- Metallic special gas vent cut to length on site (single wall version) saves time and lowers cost.
- Highest pressure rating in the industry greater than five time the industry standard
Z-Flex 2SVEPWCF0401
Item#:
2SVEPWCF0401
Manufacturer Item:
2SVEPWCF0401
Manufacturer:
Z-FLEX US INC
Z-Flex 2SVEPWCF0402 Single-Wall Pipe 4" x 24" Stainless Steel
Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.,
Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.,
2SVEPWCF0402
Item#:
2SVEPWCF0402
Manufacturer Item:
2SVEPWCF0402
Manufacturer:
Z-FLEX US INC
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
3RDH
Item#:
3RDH
Manufacturer Item:
016018
Manufacturer:
HART & COOLEY, LLC.
Granby 3DV-00-TERM-20 Coaxial Terminal with Electrical Kit for Mid-Efficient Furnaces, 4"
3DV-00-TERM-20
Item#:
3DV-00-TERM-20
Manufacturer Item:
3DV-00-TERM-20
Manufacturer:
GRANBY HEATING PRODUCTS LLC
Granby Heating Parts 3DV-00-KIT4-2A Direct Vent Kit 5" x 20'
3DV-00-KIT4-2A
Item#:
3DV-00-KIT4-2A
Manufacturer Item:
3DV-00-KIT4-2A
Manufacturer:
GRANBY HEATING PRODUCTS LLC
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RP12
Item#:
3RP12
Manufacturer Item:
016006
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RP18
Item#:
3RP18
Manufacturer Item:
016005
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
3REA90
Item#:
3REA90
Manufacturer Item:
016009
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RP24
Item#:
3RP24
Manufacturer Item:
016004
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
3REA60
Item#:
3REA60
Manufacturer Item:
011395
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RHW
Item#:
3RHW
Manufacturer Item:
2004203
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RFA
Item#:
3RFA
Manufacturer Item:
016026
Manufacturer:
HART & COOLEY, LLC.