Brand Name
Type
Length
Width
Voltage
|◀ 109 - 120 of 315 ▶|
View:
Diversitech 5-11866 No-Caulk Rubber Flashing
Diversitech 5-11866

Diversitech 5-11866

Item#:
5-11866
Manufacturer Item:
5-11866
Manufacturer:
DIVERSITECH CORP.
All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable

Southwark 481730

Item#:
481730
Manufacturer Item:
481730
Manufacturer:
SMOKE PIPE & SHEET METAL
All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable

Southwark 483330

Item#:
483330
Manufacturer Item:
483330
Manufacturer:
SMOKE PIPE & SHEET METAL
Gray Metal Products, Inc., is a family owned business started in 1906, is a full line manufacturer of heating and air conditioning products. For several decades, Gray Metal Products line has been sold to the wholesale distributors and wholesale hardware chains. Our product lines consist of prefabricated air duct and fittings for HVAC, black stovepipe and fittings, as well as hearth accessories and insulated flexible air duct products.

Gray Metal 516C

Item#:
516C
Manufacturer Item:
60-324
Manufacturer:
SMOKE PIPE & SHEET METAL
Aprilaire 6200 Series control panels are designed for single-stage heat/cool systems only. The simple and straight-forward installation prevents time wasted on complicated set-up steps that could create a call back. The simplicity and low cost make the 6200 series control panels perfect for new construction applications or as an add-on for an existing home. The model 6202 is for 2 zone applications and the Model 6203 can be used for 2 or 3 zone systems. Each has all the basic features required for a solid performing zoned comfort system

Aprilaire 6202AA

Item#:
6202AA
Manufacturer Item:
6202AA
Manufacturer:
APRILAIRE
Amcraft Ductboard Staple

Amcraft 7202

Item#:
7202
Manufacturer Item:
7202
Manufacturer:
AMCRAFT INC
Diversitech 710-102 Flexible Hanging Duct Strap

Diversitech 710-102

Item#:
710-102
Manufacturer Item:
710-102
Manufacturer:
DIVERSITECH CORP.
Aprilaire 6993 Double-D Shaft Damper Motor, 24 VAC

Aprilaire 6993

Item#:
6993
Manufacturer Item:
6993
Manufacturer:
APRILAIRE
Nortek Global (Intertherm) 903666A Slope Roof Jack 5" 51 - 95" L,

903666A

Item#:
903666A
Manufacturer Item:
SAW5195-4A
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Starting with the development of the first zoning dampers and registers in the 1950s to today, with exclusive Plug & Play dampers  Zonefirst has led the way in excellence and continued innovation.
ZONEFIRST is the first company that successfully developed and marketed HVAC Zoning Systems back in the 1950s and is today a leading manufacturer of HVAC zone dampers and zoning systems. Several other major zoning companies are in business due to ZONEFIRST.
It was in the mid to late 1950s when Richard Foster developed the first automatic motorized dampers, registers and difusers that were thermostatically controlled. He marketed these products under the trade name Zone-A-Trol with another company when in 1964 he founded Trolex Corporation and the start of the well known trade name Trol-A-Temp. In 1999 the Trol-A-Temp brand was acquired by Honeywell.
Since that time, Trolex has continued to manufacture zone dampers for a number of OEMs. In 2004 Trolex re-entered the HVAC market as ZONE-A-TROL and later the ZONEFIRST tradename. This new name signifies the many firsts the company has developed in the HVAC industry. We were the first company to develop automatic dampers, registers, and diffusers for zoning, centralized zone controllers, the first zoning system to feature normally open dampers and the first to zone heat pumps in the early 1970s

RPD04

Item#:
RPD04
Manufacturer Item:
RDP04
Manufacturer:
ZONEFIRST
Starting with the development of the first zoning dampers and registers in the 1950s to today, with exclusive Plug & Play dampers  Zonefirst has led the way in excellence and continued innovation.
ZONEFIRST is the first company that successfully developed and marketed HVAC Zoning Systems back in the 1950s and is today a leading manufacturer of HVAC zone dampers and zoning systems. Several other major zoning companies are in business due to ZONEFIRST.
It was in the mid to late 1950s when Richard Foster developed the first automatic motorized dampers, registers and difusers that were thermostatically controlled. He marketed these products under the trade name Zone-A-Trol with another company when in 1964 he founded Trolex Corporation and the start of the well known trade name Trol-A-Temp. In 1999 the Trol-A-Temp brand was acquired by Honeywell.
Since that time, Trolex has continued to manufacture zone dampers for a number of OEMs. In 2004 Trolex re-entered the HVAC market as ZONE-A-TROL and later the ZONEFIRST tradename. This new name signifies the many firsts the company has developed in the HVAC industry. We were the first company to develop automatic dampers, registers, and diffusers for zoning, centralized zone controllers, the first zoning system to feature normally open dampers and the first to zone heat pumps in the early 1970s
Zone First RTP08

Zone First RTP08

Item#:
RTP08
Manufacturer Item:
RTP-08
Manufacturer:
ZONEFIRST
Starting with the development of the first zoning dampers and registers in the 1950s to today, with exclusive Plug & Play dampers  Zonefirst has led the way in excellence and continued innovation.
ZONEFIRST is the first company that successfully developed and marketed HVAC Zoning Systems back in the 1950s and is today a leading manufacturer of HVAC zone dampers and zoning systems. Several other major zoning companies are in business due to ZONEFIRST.
It was in the mid to late 1950s when Richard Foster developed the first automatic motorized dampers, registers and difusers that were thermostatically controlled. He marketed these products under the trade name Zone-A-Trol with another company when in 1964 he founded Trolex Corporation and the start of the well known trade name Trol-A-Temp. In 1999 the Trol-A-Temp brand was acquired by Honeywell.
Since that time, Trolex has continued to manufacture zone dampers for a number of OEMs. In 2004 Trolex re-entered the HVAC market as ZONE-A-TROL and later the ZONEFIRST tradename. This new name signifies the many firsts the company has developed in the HVAC industry. We were the first company to develop automatic dampers, registers, and diffusers for zoning, centralized zone controllers, the first zoning system to feature normally open dampers and the first to zone heat pumps in the early 1970s

RTP07

Item#:
RTP07
Manufacturer Item:
RTP07
Manufacturer:
ZONEFIRST
|◀ 109 - 120 of 315 ▶|
View: