Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel

• Deep locking groove assures solid joint and secure lock
• Corrosion resistant aluminum inner wall for rapid warm-up
• Unique locking band provides 360 deg turning radius of the pipe and fittings
• Locking band slides over tabs easily, locks firmly without twisting
• Locking tabs hold pipe securely together, can be easily unlocked
• Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
• Reinforced ends curled bead on end of outer pipe for rigidity and strength
• The allowable minimum clearance to combustibles is 1"
• A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,

  Hart & Cooley 10RP24

Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel

• Deep locking groove assures solid joint and secure lock
• Corrosion resistant aluminum inner wall for rapid warm-up
• Unique locking band provides 360 deg turning radius of the pipe and fittings
• Locking band slides over tabs easily, locks firmly without twisting
• Locking tabs hold pipe securely together, can be easily unlocked
• Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
• Reinforced ends curled bead on end of outer pipe for rigidity and strength
• The allowable minimum clearance to combustibles is 1"
• A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,

  Hart & Cooley 6RN7

All Fas-n-Seal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2" air space between the inner and outer wall on Fas-n-Seal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All Fas-n-Seal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.

M & G Duravent FSA-WEIL-CGI

Mars 40003 Hub Adapter 5/16",
,

Motors & Armatures 40003

Type B gas vent products are tested and listed to UL 441 for approved gas appliances and feature our innovative twist-lock connection and locking tab, eliminating the need for sheet metal screws. Metal-Fab type B gas vent combines hemmed flues and casings that maximize product durability and reliability and minimize installation time. Designed for versatility, Metal-Fab type B gas vent products 3 - 6" adapt to major competing brands and when installed establish a UL Listed connection

Metal-Fab 6RV-2

Type B gas vent products are tested and listed to UL 441 for approved gas appliances and feature our innovative twist-lock connection and locking tab, eliminating the need for sheet metal screws. Metal-Fab type B gas vent combines hemmed flues and casings that maximize product durability and reliability and minimize installation time. Designed for versatility, Metal-Fab type B gas vent products 3 - 6" adapt to major competing brands and when installed establish a UL Listed connection

Metal-Fab 6RGS

Type B gas vent products are tested and listed to UL 441 for approved gas appliances and feature our innovative twist-lock connection and locking tab, eliminating the need for sheet metal screws. Metal-Fab type B gas vent combines hemmed flues and casings that maximize product durability and reliability and minimize installation time. Designed for versatility, Metal-Fab type B gas vent products 3 - 6" adapt to major competing brands and when installed establish a UL Listed connection

Metal-Fab 6RV-18

Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel

• Deep locking groove assures solid joint and secure lock
• Corrosion resistant aluminum inner wall for rapid warm-up
• Unique locking band provides 360 deg turning radius of the pipe and fittings
• Locking band slides over tabs easily, locks firmly without twisting
• Locking tabs hold pipe securely together, can be easily unlocked
• Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
• Reinforced ends curled bead on end of outer pipe for rigidity and strength
• The allowable minimum clearance to combustibles is 1"
• A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,

  Hart & Cooley 7RPA

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge

Southwark 547

Southwark 547

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge

Southwark 548

Southwark 548

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge