Gray Metal Products, Inc., is a family owned business started in 1906, is a full line manufacturer of heating and air conditioning products. For several decades, Gray Metal Products line has been sold to the wholesale distributors and wholesale hardware chains. Our product lines consist of prefabricated air duct and fittings for HVAC, black stovepipe and fittings, as well as hearth accessories and insulated flexible air duct products.

8X8X60-125

8X8X60-125

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.

90488

90488

All Snappy products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.

61-54

61-54

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.

DT01301048

DT01301048

Thermo Products Parts PT1819X2020 Plenum Transition 18" x 19"-20" x 20"

PT1819X2020

Starting with the development of the first zoning dampers and registers in the 1950s to today, with exclusive Plug & Play dampers  Zonefirst has led the way in excellence and continued innovation.
ZONEFIRST is the first company that successfully developed and marketed HVAC Zoning Systems back in the 1950s and is today a leading manufacturer of HVAC zone dampers and zoning systems. Several other major zoning companies are in business due to ZONEFIRST.
It was in the mid to late 1950s when Richard Foster developed the first automatic motorized dampers, registers and difusers that were thermostatically controlled. He marketed these products under the trade name Zone-A-Trol with another company when in 1964 he founded Trolex Corporation and the start of the well known trade name Trol-A-Temp. In 1999 the Trol-A-Temp brand was acquired by Honeywell.
Since that time, Trolex has continued to manufacture zone dampers for a number of OEMs. In 2004 Trolex re-entered the HVAC market as ZONE-A-TROL and later the ZONEFIRST tradename. This new name signifies the many firsts the company has developed in the HVAC industry. We were the first company to develop automatic dampers, registers, and diffusers for zoning, centralized zone controllers, the first zoning system to feature normally open dampers and the first to zone heat pumps in the early 1970s

Zone First RPD04

Starting with the development of the first zoning dampers and registers in the 1950s to today, with exclusive Plug & Play dampers  Zonefirst has led the way in excellence and continued innovation.
ZONEFIRST is the first company that successfully developed and marketed HVAC Zoning Systems back in the 1950s and is today a leading manufacturer of HVAC zone dampers and zoning systems. Several other major zoning companies are in business due to ZONEFIRST.
It was in the mid to late 1950s when Richard Foster developed the first automatic motorized dampers, registers and difusers that were thermostatically controlled. He marketed these products under the trade name Zone-A-Trol with another company when in 1964 he founded Trolex Corporation and the start of the well known trade name Trol-A-Temp. In 1999 the Trol-A-Temp brand was acquired by Honeywell.
Since that time, Trolex has continued to manufacture zone dampers for a number of OEMs. In 2004 Trolex re-entered the HVAC market as ZONE-A-TROL and later the ZONEFIRST tradename. This new name signifies the many firsts the company has developed in the HVAC industry. We were the first company to develop automatic dampers, registers, and diffusers for zoning, centralized zone controllers, the first zoning system to feature normally open dampers and the first to zone heat pumps in the early 1970s

Zone First RTP08

All Snappy products are designedand manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.

Snappy T27-6D

Snappy T27-6D

There are a number of reasons why ATCO has become a trusted brand over the many decades we have been in business. First and foremost, by consistently doing the right thing, whatever the cost, we have managed to build many lasting relationships. This core tenet has allowed us to grow globally.
Over the years, we have always held true to developing and delivering the highest quality products available. Our commitment to quality has led to numerous awards and industry recognition year after year  a source of pride throughout the ATCO family..
Wherever you do business, if flex duct is a part of your ability to succeed, rely on ATCO Rubber Products to be a trusted and reliable partner. You can expect the best from ATCO

Atco Rubber 04802512

There are a number of reasons why ATCO has become a trusted brand over the many decades we have been in business. First and foremost, by consistently doing the right thing, whatever the cost, we have managed to build many lasting relationships. This core tenet has allowed us to grow globally.
Over the years, we have always held true to developing and delivering the highest quality products available. Our commitment to quality has led to numerous awards and industry recognition year after year  a source of pride throughout the ATCO family..
Wherever you do business, if flex duct is a part of your ability to succeed, rely on ATCO Rubber Products to be a trusted and reliable partner. You can expect the best from ATCO

Thermo Products Parts PK202X202

All Snappy products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.

106-18S

106-18S

All Snappy products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.

109-168

109-168