Watts Regulator LF70A-T-1/2 Mixing Valve 1.2" FPT 120-160 Degrees Lead Free

Watts Regulator LF70A-T-1/2

Bell & Gossett EASB-1 JR Enhanced Air Separator, 1", NPT, 150 psi, 250Sid Harvey Item #:112112: Replaces Part #:'s : 3677,
,

Bell & Gossett 112112

Air Gaps for Reduced Pressure Zone Assemblies provide an unobstructed, physical separation between the discharge end of a potable water supply line and an open receiving vessel. The installation of an air gap and drain line are recommended on reduced pressure zone assemblies. Air Gaps can be installed vertically or horizontally.

Watts Water 909-AGA

Resideo TK30PV100SFM Boiler Trim Kit W/Air Purger 4.4 Gallon 1/2" MPT Tank 1" OD 100 psi,

Resideo TK30PV100SFM

Hydrolevel Parts 48-205 Extra Short Well 3/4" MPT

Hydrolevel 48-205

Safgard Electronic Low Water Cut-Off 24 volt 50 psi Automatic

• 125 VA pilot duty rating
• Compact design
• Interrupts power immediately in a low water condition
• Features test butTon, on board indicating lights and easy to follow installation instructions
• Automatically restarts burner on return of water level
• Includes plug-in wire harness with labeled quick connect terminals

Sid Harvey Item #:1100: Replaces Part #:'s : L42-931,

,

Hydrolevel 1100

Xylem 750-MT-120 Electronic Low Water Cut-Off 120 VAC Manual Reset

Xylem 750-MT-120

Gasket Domestic

Sid Harvey Item #:CO-11: Replaces Part #:'s : 13622,
,

McDonnell & Miller CO-11

Resideo Braukmann AM-1 series accurately adjusts, maintains and limits the hot water temperature to a desired setting selected by the user. By installing a Honeywell AM-1 mixing valve, raising water heater storage temperature setting and limiting mixed outlet water temperature to a safe temperature, more usable hot water is available.

• Features dual purpose mixing or diverting values
• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Designed to increase the amount of usable hot water
• Tamper resistant design with nickel plated brass construction and EPDM o-rings
• Designed for easy maintenance and teflon coating prevents mineral build-up and extends life
• Lockable hand wheel for accurate temperature control
• Straight through wiring (hot and cold at same level)
• Free thermostrip included to make temperature setting easy for one person to handle
• Teflon coated brass shuttle, EPDM rubber O-ring
• Includes check valves on hot and cold port
• 1 year limited warranty

Sid Harvey Item #:AM101R-US-1: Replaces Part #:'s : 12136,

Resideo Braukmann AM101R-US-1

Resideo Braukmann AM-1 series accurately adjusts, maintains and limits the hot water temperature to a desired setting selected by the user. By installing a Honeywell AM-1 mixing valve, raising water heater storage temperature setting and limiting mixed outlet water temperature to a safe temperature, more usable hot water is available.

• Features dual purpose mixing or diverting values
• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Designed to increase the amount of usable hot water
• Tamper resistant design with nickel plated brass construction and EPDM o-rings
• Designed for easy maintenance and teflon coating prevents mineral build-up and extends life
• Lockable hand wheel for accurate temperature control
• Straight through wiring (hot and cold at same level)
• Free thermostrip included to make temperature setting easy for one person to handle
• Teflon coated brass shuttle, EPDM rubber O-ring
• Includes check valves on hot and cold port
• 1 year limited warranty

,

Resideo Braukmann AM101-UT-1LF

Resideo Braukmann AM-1 series accurately adjusts, maintains and limits the hot water temperature to a desired setting selected by the user. By installing a Honeywell AM-1 mixing valve, raising water heater storage temperature setting and limiting mixed outlet water temperature to a safe temperature, more usable hot water is available.

• Features dual purpose mixing or diverting values
• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Provides reliable performance at minimum flow of 5 gpm and proportional valve for simultaneous control of hot and cold
• Tamper-resistant design with nickel-plated brass construction and EPDM o-rings
• Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
• Teflon-coated shuttle, EPDM rubber o-ring

,
,

Resideo Braukmann AM101-US-1LF

Bell & Gossett Airtol ATF-12 Cast Iron Tank Fitting, 1/2", FNPT x FNPT Airtrol tank fittings help establish the proper initial liquid level in the compression tank when filling the hydronic system. They help maintain proper system pressurization by directing released air to the compression tank during system operation and permit cooler liquid flow to the boiler during the off cycle as system liquid cools. Airtrol tank fittings must be used with the appropriately sized in-line airtrol or rolairtrol air separator.

• Copper and copper plated tubes
• Brass vent tube fittings Airtrol tank fittings help establish the proper initial liquid level in the compression tank when filling the hydronic system. They help maintain proper system pressurization by directing released air to the compression tank during system operation and permit cooler liquid flow to the boiler during the off cycle as system liquid cools. Airtrol tank fittings must be used with the appropriately sized in-line airtrol or rolairtrol air separator.Sid Harvey Item #:ATF12: Replaces Part #:'s : 3651,
  ,
  

  Bell & Gossett ATF12