|◀ ◀ 565 - 576 of 650 ▶ ▶|
View:

Unit Heater Natural Gas Power Vented 125K 83% AFUE 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-125
    Manufacturer Item:
    UDXC-125
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 100K BTU 83% 120 VAC

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)
    • Item#:
    UDX-100
    Manufacturer Item:
    UDX-100
    Manufacturer:
    REZNOR LLC
     
    UDX-100

    Unit Heater Natural Gas Power Vented 350K BTU 83% 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-350
    Manufacturer Item:
    UDXC-350
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 60K 83% AFUE 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-60
    Manufacturer Item:
    UDXC-60
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 200K BTU 83% 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-200
    Manufacturer Item:
    UDXC-200
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 45K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)
    • Item#:
    UDAP-45
    Manufacturer Item:
    UDAP-45
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec

    Unit Heater Natural Gas Power Vented 175K 83% AFUE 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-175
    Manufacturer Item:
    UDXC-175
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 150K 83% AFUE 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-150
    Manufacturer Item:
    UDXC-150
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 400K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)
    • Item#:
    UDAP-400
    Manufacturer Item:
    UDAP-400
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec

    Unit Heater Natural Gas Power Vented 175K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)
    • Item#:
    UDAP-175
    Manufacturer Item:
    UDAP-175
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec

    Unit Heater Natural Gas Power Vented 300K BTU 83% 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-300
    Manufacturer Item:
    UDXC-300
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 250K BTU 83% 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-250
    Manufacturer Item:
    UDXC-250
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc
    |◀ ◀ 565 - 576 of 650 ▶ ▶|
    View: