williamson -thermoflo clb105ddrxws2

CLB-Series_Spec

Oil Furnace Hi-Boy 97-101K BTU Output 85-86.2% AFUE 120 VAC 6" Flue Front Flue (BURNER NOT INCLUDED)

Features:
Powder Coat

85.9% AFUE, 91000/105000/119000 BTU Input, 79400/90200/101200 BTU Output, 1325 cfm

Less burner
Rear flue
Interior baffling for maximum efficiency
3.5 Ton cooling capacity
Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
Spring loaded observation port with test port
18-1/2" width x 17-1/2" depth supply air outlet
18-1/2" width x 15-1/2" depth return air outlet
6" flue diameter
Heavy gauge burner mounting plate with studs and nuts
Heavy-gauge with seal-tite construction
Preformed slide out chamber for easy service

,

williamson -thermoflo clb105ddrxws2

Item#:

CLB-105-VS-F-S2-W

Manufacturer Item:

CLB105VSFS2W

Manufacturer:

WILLIAMSON -THERMOFLO

CLB-Series_Spec

Oil Furnace Hi-Boy 97-101K BTU Output 85-86.2% AFUE 120 VAC 6" Flue Direct Drive Rear Flue (BURNER NOT INCLUDED)

Features:
Powder Coat

85.9% AFUE, 91000/105000/119000 BTU Input, 79400/90200/101200 BTU Output, 1325 cfm

Less burner
Rear flue
Interior baffling for maximum efficiency
3.5 Ton cooling capacity
Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
Spring loaded observation port with test port
18-1/2" width x 17-1/2" depth supply air outlet
18-1/2" width x 15-1/2" depth return air outlet
6" flue diameter
Heavy gauge burner mounting plate with studs and nuts
Heavy-gauge with seal-tite construction
Preformed slide out chamber for easy service

,

williamson -thermoflo clb105ddrxws2

Item#:

CLB105DDRXWS2

Manufacturer Item:

CLB105DDRXWS2

Manufacturer:

WILLIAMSON -THERMOFLO

CLB-Series_Spec

96% Variable-Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

Variable-speed blower motor and two-stage gas valve provide enhanced levels of even temperature control and comfort

Dual fuel capable with compatible heat pump & thermostat for energy-saving heating performance

As a two-stage furnace, it operates at low stage most of the time to save energy, smoothly ramping up the heat to high stage as temperatures drop

Fully insulated cabinet helps keep the heat moving to your ductwork and provides quiet operation

Air purifier and humidifier compatible

Wi-Fienabled remote access with the IonSystem Control±

Item#:

G96CTN0801714A

Manufacturer Item:

G96CTN0801714A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

G96CTN-Care_Misc

G96CTN_Install

G96CTN_Spec

Oil Furnace Hi-Boy 97-101K BTU Output 85-86.2% AFUE 120 VAC 6" Flue Direct Drive Front Flue (BURNER NOT INCLUDED)

Features:

Powder Coat Paint

85.9% AFUE, 91000/105000/119000 BTU Input, 79400/90200/101200 BTU Output

1325 cfm

Less burner

Front flue

Interior baffling for maximum efficiency

3.5 Ton cooling capacity

Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface

Spring loaded observation port with test port

18-1/2" width x 17-1/2" depth supply air outlet

18-1/2" width x 15-1/2" depth return air outlet

6" flue diameter

Heavy gauge burner mounting plate with studs and nuts

Heavy-gauge with seal-tite construction

Preformed slide out chamber for easy service

Item#:

CLB105DDFXWS2

Manufacturer Item:

CLB105DDFXWS2

Manufacturer:

WILLIAMSON -THERMOFLO

CLB-Series_Spec

Oil Furnace Hi-Boy 119K BTU Output 85-86.2% AFUE 120 VAC 7" Flue Heavy Gauge Heat Exchanger, Slide Out Chamber, Direct Drive Motor

Features:
AFUEs to 85.9%
Heat exchanger

Heaviest in the industry

Front flue with top or right side ventiing option

Interior baffling for maximum efficiency

Dual spring-loaded clean-out ports for easy service and maintenance

Spring-loaded observation port with test port

Heavy gauge burner mounting plate with studs and nuts
Blower

Belt drive or multi-speed direct drive

Slide-out blower/motor easily removed for service Cabinet

Appliance finish Powder coat paint

Heavy gauge Seal-Tite construction

Foil-faced insulation for hand-cool surface

Fully-enclosed burner and controls Combustion Chamber

Preformed slide-out chamber for easy service Burner and controls

Factory-wired with simple plug-in connections

PSC motor

Solid state ignitor

Item#:

CHB-140-VS-S2-W

Manufacturer Item:

CHB140VSS2W

Manufacturer:

WILLIAMSON -THERMOFLO

CHB-Series_Spec

Unit Heater Natural Gas Power Vented 75K 83% AFUE 120 VAC

Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.

Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).

Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities

Sizes 30-400 MBTUH certified for commercial/industrial heating application

Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications

50-60°F Rise range

Integrated circuit board with 7 segment display

External status indicating LED

Hinged door with ¼ turn latch

Improved cabinet design with removeable front face and two tone white and black powder paint.

Tcore2 titanium stabilized aluminized steel heat exchanger

Patented single burner combustion system including a one-piece burner assembly

115V, 1 phase, 60 Hz supply voltage

115 Volt open fan motor with internal overload protection

Transformer for 24-volt controls

Multi-try direct spark ignition with timed lockout

Fan relay (included on the circuit board)

Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)

Vibration/noise isolated fan and venter motors ~ designed for low noise operation

2-pt and 4-pt Suspension ~ standard on all sizes

External terminal strip for 24-volt wiring

External gas pipe connection

Full fan guard

Optional Features
Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)

Two-stage gas valve (sizes 60-400)

409 or 316 stainless steel heat exchangers

Totally enclosed fan motor (sizes 30-400)

Vent cap

Thermostat

Integrated vertical louvers

Integrated 30° & 60° downturn nozzles

Gas conversion kits (natural and propane)

Primary/secondary controls for zoning up to six units

Ceiling suspension kit - Sizes 30-125

Hanger kits for 1 pipe

Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)

Manual shutoff valves

UDX-75

Item#:

UDX-75

Manufacturer Item:

UDX-75

Manufacturer:

REZNOR LLC

UDX-REZNOR_SPEC

Oil Furnace Hi-Boy 119K BTU Output 85-86.2% AFUE 120 VAC 7" Flue Direct Drive

Features:
AFUEs to 85.9%
Heat exchanger

Heaviest in the industry

Front flue with top or right side ventiing option

Interior baffling for maximum efficiency

Dual spring-loaded clean-out ports for easy service and maintenance

Spring-loaded observation port with test port

Heavy gauge burner mounting plate with studs and nuts
Blower

Belt drive or multi-speed direct drive

Slide-out blower/motor easily removed for service Cabinet

Appliance finish Powder coat paint

Heavy gauge Seal-Tite construction

Foil-faced insulation for hand-cool surface

Fully-enclosed burner and controls Combustion Chamber

Preformed slide-out chamber for easy service Burner and controls

Factory-wired with simple plug-in connections

PSC motor

Solid state ignitor

Item#:

CHB140DDXWS2

Manufacturer Item:

CHB140DDXWS2

Manufacturer:

WILLIAMSON -THERMOFLO

CHB-Series_Spec

80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

80% AFUE

Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

Supports twostage cooling units

ION Communicating Control System

Observer Communicating Control System

Flame rollout sensors standard

Category I venting

Blocked vent switch

Dehumidification feature in cooling

24 VAC humidifier termina
l

Electronic air cleaner terminal

Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

International Comfort Products G80CTL1102120A

Item#:

G80CTL1102120A

Manufacturer Item:

G80CTL1102120A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

G80CTL-ICP-Care_Misc

G80CTL-ICP_Install

G80CTL-ICP_Spec

Oil Furnace Hi-Boy 97-101K BTU Output 85-86.2% AFUE 120 VAC 6" Flue Heavy Gauge Heat Exchanger, Slide Out Chamber, Direct Drive Motor

Features:
AFUEs to 85.9%
Heat exchanger

Heaviest in the industry

Front flue with top or right side ventiing option

Interior baffling for maximum efficiency

Dual spring-loaded clean-out ports for easy service and maintenance

Spring-loaded observation port with test port

Heavy gauge burner mounting plate with studs and nuts
Blower

Belt drive or multi-speed direct drive

Slide-out blower/motor easily removed for service Cabinet

Appliance finish Powder coat paint

Heavy gauge Seal-Tite construction

Foil-faced insulation for hand-cool surface

Fully-enclosed burner and controls Combustion Chamber

Preformed slide-out chamber for easy service Burner and controls

Factory-wired with simple plug-in connections

PSC motor

Solid state ignitor

Item#:

CHB-105-VS-S2-W

Manufacturer Item:

CHB105VSS2W

Manufacturer:

WILLIAMSON -THERMOFLO

CHB-Series_Spec

Oil Furnace Hi-Boy 97-101K BTU Output 85-86.2% AFUE 120 VAC 6" Flue Direct Drive

Features:
AFUEs to 85.9%
Heat exchanger

Heaviest in the industry

Front flue with top or right side ventiing option

Interior baffling for maximum efficiency

Dual spring-loaded clean-out ports for easy service and maintenance

Spring-loaded observation port with test port

Heavy gauge burner mounting plate with studs and nuts
Blower

Belt drive or multi-speed direct drive

Slide-out blower/motor easily removed for service Cabinet

Appliance finish Powder coat paint

Heavy gauge Seal-Tite construction

Foil-faced insulation for hand-cool surface

Fully-enclosed burner and controls Combustion Chamber

Preformed slide-out chamber for easy service Burner and controls

Factory-wired with simple plug-in connections

PSC motor

Solid state ignitor

williamson -thermoflo chb105ddxws2

Item#:

CHB105DDXWS2

Manufacturer Item:

CHB105DDXWS2

Manufacturer:

WILLIAMSON -THERMOFLO

CHB-Series_Spec