Novent Key Style locking caps were specifically designed to protect standard Schrader service valves on A/C units to help prevent leakage or misuse of refrigerant on residential and commercial equipment.

When installed, the outer casing will rotates around the thread insert, not allowing cap to be removed, an integral torque limiter prevents over tightening
• Novent locking cap have an inner thread insert made of precision machined solid brass
• Outer shells is made of a protective corrosion resistant anodized aluminum shroud
• Integral neoprene O-Ring resists oils and sealants
• Embossed ID labeling prevents refrigerants gas mixing
• Grasp cap, insert keys and turn clockwise until snug
• Place female thread of the novent cap onto male thread of the Schrader valves and tighten securely be hand using the Novent keys
• Grasp cap, rotates keys counter clockwise and remove keys
• Reverse for removal of cap
  
  

  NG-STARTPAK

Diversitech Refrigerant Label, 3" L, Vinyl, Acrylic Adhesive, These 3 x 4 in self-adhesive vinyl labels use a high-tack acrylic adhesive and UV cured screen printing. Color coded to conform to refrigerant labeling convention. Each label indicates the type of refrigerant (eg. R-11), the chemical name (eg. Trichloromonofluromethane) and the UN No. (eg. UN 1078). Avoid costly mistakes by properly identifying the type of refrigerant contained in recovery cylinders and air conditioning and refrigeration equipment.

Diversitech 04410

Diversitech Refrigerant Label, 3" L, Vinyl, Acrylic Adhesive, These 3 x 4 in self-adhesive vinyl labels use a high-tack acrylic adhesive and UV cured screen printing. Color coded to conform to refrigerant labeling convention. Each label indicates the type of refrigerant (eg. R-11), the chemical name (eg. Trichloromonofluromethane) and the UN No. (eg. UN 1078). Avoid costly mistakes by properly identifying the type of refrigerant contained in recovery cylinders and air conditioning and refrigeration equipment.

Diversitech 04022

Yellow Jacket 60636 Off-Set Refrigeration Wrench 5/8"x 11/16" (Knuckle Saver),

60636

Yellow Jacket 60637 Off-Set Refrigeration Wrench 3/4"x 7/8" (Knuckle Saver),

60637

Nu-Calgon 4297-76 Pipe-Dri Spray Insulation

Pipe-Dri is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines, and other cold surfaces. Quickly adheres and dries to a hard water proof coating. Pipe-Dris spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas.

This product is ideal for providing a moisture barrier for refrigeration and air conditioning lines, and cold water pipes, etc. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of one inch water pipe or eight square feet of flat surface area with two coats.

Ideally, the product should be at room temperature (70-75°F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80°F); however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120°F.

Diversitech Drain Gun GG-1 Portable Drain Cleaning Tool

Clears condensate drains with a swoosh a lightweight (3 oz.) portable tool designed to blow out drain lines instantly
• SWOOSH CO2 cartridges deliver 800 psi of oil free air to clear the line
• Each unit comes equipped with a tapered fitting to work on 3/8 - 3/4" drain openings
• Flexible hose assembly manoeuvres through cabinets, coils and hard to reach drains
• Cartridges are environmentally safe and recyclable
• No need for air or nitrogen tanks
• Reduces labor costs and time on service calls
• Inflate truck tires
• PisTon regulator
• Replacement cartridge sale
• Flexible hose assembly
• Lightweight and portable
• Multiple uses
• High delivery pressure
• Boxed fitting kit
• Drain dawg inflatable tip
  
  

  Diversitech GG-1

Diversitech SG-1 Big Shot Swoosh Gun

Diversitech SG-1

Milwaukee Tool Force Logic M12 Cordless Press Tool Kit, 5 sec Crimp Time,
Milwaukee Tools 2473-22

Milwaukee Tools 2473-22

ACR Press Jaws change the game in refrigerant line installations, offering you a flame-free, efficient alternative to traditional brazing. The jaws unlock productivity for HVAC system installers, eliminating nitrogen purges, combustible gases, and expensive silver solder necessary for traditional pipe connection methods. With an easy-open, in-line design, our press jaws are optimized for the tightest spaces, utilizing the M12 FORCE LOGIC Press Tool. The Streamline ACR Press Jaws are designed for use on Mueller Streamline ACR Press fittings.
Milwaukee Tools 49-16-2661M

Milwaukee Tools 49-16-2661M

Klein Tools 86571 Nylon Tie Tool W/Cutoff,

Klein Tools 86571

WHAT IS PYTHON?

PYTHON IS A PERT-AL-PERT LINE SET AND COMPRESSION FITTING SYSTEM DESIGNED FOR BOTH SPLIT SYSTEM AND MINI-SPLIT SYSTEM APPLICATIONS INCLUDING HEAT PUMP SYSTEMS.

FEATURES

FOR HVAC RESIDENTIAL & COMMERCIAL APPLICATIONS

LIGHTWEIGHT half the weight of copper pipe

ICC-ES PMG-1675 Listed

PRODUCT TESTED AND LISTED TO ASTM F3506-21 CHEMICAL, UV & KINK RESISTANT

NO NEED FOR A TORCH ON SITE

SURFACE FRICTION OF PERT VS. COPPER EQUIVALENT

SPECS

MAXIMUM DESIGN PRESSURE 1/4  3/4 is 700psi, 7/8 is 650psi

MAXIMUM DESIGN TEMPERATURE 203F

ID & FLOW RATES same as copper pipe

APPROVED REFRIGERANTS R410a, R32, R454b

AVAILABLE PIPE SIZES 1/4, 3/8, 1/2, 5/8, 3/4, 7/8

PIPE MARKED EVERY FOOT

INSULATION

COMPLETELY RECYCLABLE

NON-POROUS, FIBER-FREE closed-cell insulation resists mold growth

MANUFACTURED WITHOUT CFCs, HCFCs, HFCs, PBDEs, and formaldehyde

YEAR-ROUND PIPE PROTECTION from freezing and condensation

TEAR RESISTANT