These fuses are recommended for AC power distribution system mains, feeders and branch circuits having inductive loads motors, transformers or non inductive loads lighting, heating where the available short circuit current does not exceed 200000 RMS symmetrical amp. These dual element, time delay fuses have minimum industry standard time delay of 10 sec at 5 times the fuse rating 8 sec. minimum for 250 VAC , 30 amp and less. The time delay characteristics of these fuses typically allows them to be sized closer to the running ampacity of inductive loads to reduce cost and provide improved overcurrent protection. These fuses will override normal equipment current surges to reduce unnecessary fuse openings. They are the most popular fuses used in the industry and the most economical for most applications, especially motors and transformers. They have moderate current limitation.

• Provides motor overload, ground fault and short-circuit protection
• Permits the use of smaller and less costly switches, the time-delay feature makes it possible to use fuse amp ratings which are much smaller than those of non time delay uses
• Considerable cost saving occurs by permitting the use of smaller size switches, panels and fuses themselves
• Provides a higher degree of short circuit protection greater current-limitation in circuits in which surge currents or temporary overloads occur
• Gives motor running back up protection to motors without extra costs
• Helps protect motors against burnout from single phasing on three phase systems
• Simplifies and improves blackout prevention
• Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance, short circuit and overload protection
• True dual-element construction allows sizing of 125% FLA for motor backup protection
• Superior overload and cycling capabilities
• Current limiting provides component short circuit protection

,
,

Bussmann E356-57

These fuses are recommended for AC power distribution system mains, feeders and branch circuits having inductive loads motors, transformers or non inductive loads lighting, heating where the available short circuit current does not exceed 200000 RMS symmetrical amp. These dual element, time delay fuses have minimum industry standard time delay of 10 sec at 5 times the fuse rating 8 sec. minimum for 250 VAC , 30 amp and less. The time delay characteristics of these fuses typically allows them to be sized closer to the running ampacity of inductive loads to reduce cost and provide improved overcurrent protection. These fuses will override normal equipment current surges to reduce unnecessary fuse openings. They are the most popular fuses used in the industry and the most economical for most applications, especially motors and transformers. They have moderate current limitation.

• Provides motor overload, ground fault and short-circuit protection
• Permits the use of smaller and less costly switches, the time-delay feature makes it possible to use fuse amp ratings which are much smaller than those of non time delay uses
• Considerable cost saving occurs by permitting the use of smaller size switches, panels and fuses themselves
• Provides a higher degree of short circuit protection greater current-limitation in circuits in which surge currents or temporary overloads occur
• Gives motor running back up protection to motors without extra costs
• Helps protect motors against burnout from single phasing on three phase systems
• Simplifies and improves blackout prevention
• Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance, short circuit and overload protection
• True dual-element construction allows sizing of 125% FLA for motor backup protection
• Superior overload and cycling capabilities
• Current limiting provides component short circuit protection

,
,

Bussmann E356-48

These fuses are recommended for AC power distribution system mains, feeders and branch circuits having inductive loads motors, transformers or non inductive loads lighting, heating where the available short circuit current does not exceed 200000 RMS symmetrical amp. These dual element, time delay fuses have minimum industry standard time delay of 10 sec at 5 times the fuse rating 8 sec. minimum for 250 VAC , 30 amp and less. The time delay characteristics of these fuses typically allows them to be sized closer to the running ampacity of inductive loads to reduce cost and provide improved overcurrent protection. These fuses will override normal equipment current surges to reduce unnecessary fuse openings. They are the most popular fuses used in the industry and the most economical for most applications, especially motors and transformers. They have moderate current limitation.

• Provides motor overload, ground fault and short-circuit protection
• Permits the use of smaller and less costly switches, the time-delay feature makes it possible to use fuse amp ratings which are much smaller than those of non time delay uses
• Considerable cost saving occurs by permitting the use of smaller size switches, panels and fuses themselves
• Provides a higher degree of short circuit protection greater current-limitation in circuits in which surge currents or temporary overloads occur
• Gives motor running back up protection to motors without extra costs
• Helps protect motors against burnout from single phasing on three phase systems
• Simplifies and improves blackout prevention
• Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance, short circuit and overload protection
• True dual-element construction allows sizing of 125% FLA for motor backup protection
• Superior overload and cycling capabilities
• Current limiting provides component short circuit protection

,
,

Bussmann E356-59

The Flip Toggle Anchor is a single piece, nylon body anchor with a metal tilting head ideal for use in drywall, plaster and hollow wall concrete blocks. It's unique tilting mechanism ensures a trouble-free installation that yields twice the strength of a regular toggle bolt of the same bolt diameter.

L.H. Dottie CK14

Bussmann AGC-3 Glass Tube Single Element Small Dimension Ferrule End Fast-Acting Fuse, 3 amp, 250 VAC

• Nickel-plated brass endcaps
• Fast-acting for maximum protection
• Wide amp/VAC ratings allow versatility of protecting electronic circuits

,
,

Bussmann AGC-1

Bussmann AGC-1 Glass Tube Single Element Small Dimension Ferrule End Fast-Acting Fuse, 1 amp, 250 VAC

• Nickel-plated brass endcaps
• Fast-acting for maximum protection
• Wide amp/VAC ratings allow versatility of protecting electronic circuits

,
,

Bussmann ABC15

Bussmann ATC-5 Lead Free Polycarbonate Blade End Fast Acting Fuse, 5 amp, 32 VDC, Tan

• Halogen free
• Tin plated zinc terminal and element for corrosion resistance and enhanced conductivity
• Industry standard color coding for quick identification of amp rating

Sid Harvey Item #:ATC-5: Replaces Part #:'s : 6506,
,

Bussmann AGC-3

By drilling its own hole, Bit-Tip produces the optimum hole size, resulting in better thread engagement and a tighter fit. One operation fastening also means no alignment problems. Bit-Tip has a wide range of industry applications. Select the Bit-Tip that's right for the job. Point length will determine metal thickness that can be drilled, tapped and fastened. Also, plywood, soft wood, composition board, drywall, insulation and laminates may be fastened to metal framing or components. Made from strong, high quality, specially heat treated steel. Bit-Tip Self Drilling and Tapping Screws are precision cold forged insuring uniformity of dimension and drill point contours. The versatile Bit-Tip Screw is an excellent replacement for fastening operations now using rivets, nuts and bolts, spot welds or adhesives. Bit-Tip also eliminates the need for costly auxiliary fastening equipment such as drill bits, taps and welding equipment. Requires only a standard screw gun power tool rated at 2500 RPM equipped with drilling depth locator.

• Trademarked and patented head markings indicate one and only genuine bit-tips
• 2100 lb tensile strength
• 61 lb torsional strength
• For 0.11 - 0.175" thickness material

Sid Harvey Item #:BT144-500: Replaces Part #:'s : 13120,
,

Malco BT143X

Malco BT141D Zinc-Plated Steel Hexagonal Washer Head Self Drilling Screw #10-16 x 1" (500 PACK),
,

Malco BT134T

Bit-Tip has a wide range of industry applications. Select the Bit-Tip that's right for the job. Point length will determine metal thickness that can be drilled, tapped and fastened. Also, plywood, soft wood, composition board, drywall, insulation and laminates may be fastened to metal framing or components. Made from strong, high quality, specially heat treated steel. Bit-Tip self drilling and tapping screws are precision cold forged insuring uniformity of dimension and drill point contours. The versatile Bit-Tip screw is an excellent replacement for fastening operations now using rivets, nuts and bolts, spot welds or adhesives. Bit-Tip also eliminates the need for costly auxiliary fastening equipment such as drill bits, taps and welding equipment.

• Bit-tip drill and tap screws produce the optimum hole size for a quick tight fit
• Bit-tip also eliminates the need for costly auxiliary fastening equipment such as drill bits, taps and welding equipment
• Precision cold forged insuring uniformity of dimension and drill point contours Requires only a standard screw gun power tool rated at 2500 RPM equipped with drilling depth locator
• Patented head markings U.S. patent number D524638

Sid Harvey Item #:BT133T: Replaces Part #:'s : 13113,
,

Malco BT132-500

Malco Bit-Tip BT143 Steel Hexagonal Washer Head Self Drilling Screw, Bit-Tip has a wide range of industry applications. Select the Bit-Tip that's right for the job. Point length will determine metal thickness that can be drilled, tapped and fastened. Also, plywood, soft wood, composition board, drywall, insulation and laminates may be fastened to metal framing or components. Made from strong, high quality, specially heat treated steel. Bit-Tip self drilling and tapping screws are precision cold forged insuring uniformity of dimension and drill point contours. The versatile Bit-Tip screw is an excellent replacement for fastening operations now using rivets, nuts and bolts, spot welds or adhesives. Bit-Tip also eliminates the need for costly auxiliary fastening equipment such as drill bits, taps and welding equipment.Sid Harvey Item #:BT143T: Replaces Part #:'s : 13119,
,

Malco BT142-500

Malco Bit-Tip BT143x Self Drilling Screw, Imperial, #10-16, Hex Washer By drilling its own hole, Bit-Tip produces the optimum hole size, resulting in better thread engagement and a tighter fit. One operation fastening also means no alignment problems. Bit-Tip has a wide range of industry applications. Select the Bit-Tip that's right for the job. Point length will determine metal thickness that can be drilled, tapped and fastened. Also, plywood, soft wood, composition board, drywall, insulation and laminates may be fastened to metal framing or components. Made from strong, high quality, specially heat treated steel. Bit-Tip Self Drilling and Tapping Screws are precision cold forged insuring uniformity of dimension and drill point contours. The versatile Bit-Tip Screw is an excellent replacement for fastening operations now using rivets, nuts and bolts, spot welds or adhesives. Bit-Tip also eliminates the need for costly auxiliary fastening equipment such as drill bits, taps and welding equipment. Requires only a standard screw gun power tool rated at 2500 RPM equipped with drilling depth locator.,
,

Malco BT143T