RectorSeal Nokorode 14000 Tan/Gold to Black Regular Paste Flux, 1.7 oz, Jar

• Lead free
• Odorless
• clean and flux in one step
• prepares joint for a strong weld
• Low scorching
• Low spattering
• Smooth consistency makes it easy to apply
• Special oil base protects the solder joint against corrosive attack
• Will not freeze or decompose

Sid Harvey Item #:T720-57: Replaces Part #:'s : 9K967 | 9K968 |,
,

RectorSeal T720-57

Harris T720-54 An all-purpose, low-temperature flux for use in silver brazing. Use with most ferrous and non ferrous metals, not recommended on aluminum, magnesium, and titanium.

• Flux may be water thinned but care should be taken to avoid excess dilution
• Flux turns clear, (transparent), close to brazing application temperature
• Burns eyes and skin can be fatal if swallowed
• Fukes and gases can be hazardous to your health
• Heat rays, (infrared radiation) from flame or hot metal can injure eyes Harris Stay-Silv SSWF Flux, 6.5 oz, Brush Cap Bottle,
  ,
  

  Harris T720-54

Harris T720-55 An all-purpose, low-temperature flux for use in silver brazing. Use with most ferrous and non ferrous metals, not recommended on aluminum, magnesium, and titanium.

• Flux may be water thinned but care should be taken to avoid excess dilution
• Flux turns clear, (transparent), close to brazing application temperature
• Burns eyes and skin can be fatal if swallowed
• Fukes and gases can be hazardous to your health
• Heat rays, (infrared radiation) from flame or hot metal can injure eyes

,
,

Harris T720-55

Harris T720-53 Soldering Flux 32 oz Bottle,
,

Harris T720-53

Harris 95561 Lead Free Solder, 1/8", 1 lb Spool

• Tin-antimony solder well suited for applications where moderately elevated temperature is a factor
• With higher electrical conductivity and high fluidity, 95/5 is recommended for lead free installation of small diameter, tight fitting connections
• Not recommended for use on brass or HVAC connections
• 95 - 5 tin/antimony solder is a low temperature lead free solder with a narrow melting range
• The rapid melting characteristics require close fitting connections as it is difficult bridge or fill wide clearance

Sid Harvey Item #:T720-6: Replaces Part #:'s : 15202,
,

Harris T720-6

Harris ZN78CW09420POP Flux Cored Aluminum Brazing Alloy 800-900 Degrees,
,

Harris ZN78CW09420POP

Oatey Climate Smooth Hercules 10619 Soldering Paste, 9 oz, Bottle, Amber,
,

Oatey 10619

Utility Enterprises 14-220 Soldering Flux, 16 oz, Tan, 24/Case

• Self cleaning
• Lead free flux specially formulated for sweat fitting work
• Makes solder flow freely and tin perfectly, recommended for all soft solder work, including 95/5
• Removes oxidation and prepares copper, lead, brass, tin, stainless steel, cast and wrought iron for the proper bonding of solder to metal assuring leak-tight joints

,
,

Utility Enterprises 14-220

Rectorseal 14730 Flux Nokorode 1 Lb.

RectorSeal 14730

Utility Enterprises The original self cleaning, lead free flux specially formulated for sweat fitting work. It removes oxidation and prepares copper, lead, brass, tin, stainless steel, cast and wrought iron for the proper bonding of solder to metal assuring leak-tight joints. It makes the solder flow freely and tin perfectly. It's recommended for all soft solder work, including 95/5. Meets federal specification 0-F-506.

,
,

Utility Enterprises 14-216

RectorSeal 14720 Cold Weather Paste Flux,
,

RectorSeal 14720

Nokorode Pre­Tinning Paste Flux is a creamy­smooth paste specifically formulated with a small amount of 95/5 tin/antimony solder powder in the formula and a heat indicator. It is formulated to clean, pretin and flux the joint all at one time. Provides a fast, safe method of fluxing most common metals and solders. Excellent for use on larger diameters fittings or faster solderings of smaller diameter fittings because it automatically tins before reaching higher temperature.,
,

RectorSeal 14115