Sealed Unit Parts SLT45 Defrost Sensor Open 45 Close 22, 2 Wire Tube Mount

Sealed Unit Parts SLT45

Johnson Controls SEC99AA-24C Brass Sleeve and Copper Tubing Armored 24",

Johnson Controls SEC99AA-24C

Johnson Controls SEC99AA-36C Brass Sleeve and Copper Tubing Armored 36",

Johnson Controls SEC99AA-36C

Sealed Unit Parts The SL series line of exact replacement heavy-duty sealed bimetal disc controls meets the higher electrical requirements of commercial applications. Can handle electrical loads up to 25 A at 120/240VAC.,

Sealed Unit Parts SL5709

Sealed Unit Parts The SL series line of exact replacement heavy-duty sealed bimetal disc controls meets the higher electrical requirements of commercial applications. Can handle electrical loads up to 25 A at 120/240VAC.,

Sealed Unit Parts SL5708

Sealed Unit Parts SL79002 3-Wire Defrost Thermostat

Sealed Unit Parts SL79002

Sealed Unit Parts SL79005 Metal Case Non-Programmable 3-Wire Defrost Thermostat.

Sealed Unit Parts SL79005

Diversitech Designed for use on 3/4 in PVC condensate drain line. Snaps easily over existing drain line tubing and can be glued in place using PVC cement. The SOS electronically senses water near the inside wall of the PVC drain tubing. By locating the SOS with its body away from the normal flow, it can be used to detect a possible overflow condition when the PVC drain line becomes full with water. Like a culvert, the condensate drain line is normally mostly empty with a small amount of water flowing in the lower parts of the horizontal run. Since the sensor component of the SOS only covers part of the tubing, a low volume of flowing water does not activate the switch. The pipe must be full or near full to activate the switch. Mount SOS horizontally, vertically, or at any angle. Works with 24 VAC control circuits and typical contactors. When not detecting water, the SOS is normally closed and allows normal air conditioner operation. When water approaches the SOS's sensor, the switch triggers, and the control circuit is opened. The LED indicator lights to show that there may be system trouble, and the SOS is doing its job. Includes press to test switch. Furnished complete with switch, 5 feet (1.5 m) 18 AWG, 2 wire lead, and a 3/4" PVC male fitting adapter for direct coupling to a primary pan drain line connection. Now available with Push to Test button.Sid Harvey Item #:SOS-1: Replaces Part #:'s : 32964,
,

Diversitech SOS-1

Mitco T397-165 Bug Plug Used with T397-164M (5 Pack)

Mitco T397-165

Sealed Unit Parts TR10-12 Teflon O-Ring,

Sealed Unit Parts TR10-12

Diversitech WS-1 is a solid state control designed to help prevent flooding, damage to carpets, walls, furniture, ceilings, etc. Now has a built-in test and reset button for easier installation. Turns system off when detecting moisture due to condensate or drain leaks. 1 or 2 drops will cause wet switch to turn off a unit, alerting a serviceman to a moisture problem. A lit LED indicates the wet switch is activated and has turned the unit off. Reset simply by drying the absorbent pad with a paper towel and pressing the reset switch. Connects to 24 VAC. More than 1 unit may be connected to a system.

Diversitech WS-1

White Rodgers Cooling Controls Cooling Controls x28747-1 Mounting Bracket for STAS Steel Liquid and Suction Line Filter Drier,

White Rodgers 061715