Supreme Stands Mini-Split Heat Pump Stand

Supreme Stands MIN1832

RectorSeal Big Foot Fix-It-Foot Riser

Rubber/Aluminum 24"



RMB24

The Parker Refrigeration Valves consist of solenoid valves for liquid, suction and hot gas defrost application requirements. The valves are compatible with virtually all of todays commercially available CFC, HCFC and HFC refrigerants and blends. The Parker refrigeration valves meet a broad range of system needs including refrigeration, air conditioning and freezing applications. From small fractional tonnage to large systems. The portfolio is endowed with numerous benefits including

Normally closed and normally open valves

State of the art operator performance for long life, ease of service and tighter system integrity

High pressure ratings to comply with R410A

Extended end sweat connections enable brazing installation without disassembly

AC & DC coils are interchangeable on all valve body versions

• Type: Normally Closed
• Connection 1/4
• Connection: ODF
• Port (In.): 7/64"
• Body Type: Brass
• Safe Working Pressure (PSI): 500



R46E257M

Parker commercial pressure regulator (S)PORT/(S)PORTII valves are designed with stainless steel bonnet bolts, adjusting stems, and piston and plug assemblies. The result is a regulator designed to withstand the rigorous application environment a low side regulator must endure. Models are available in combinations of connection sizes, port sizes and features as designated by the model code. Unlike some competitive models of low side regulators that utilize high pressure discharge gas as a pilot source, they are piloted with upstream pressure. This eliminates the requirement for hot gas headers, isolation devices, piping, and the labor associated with the installation of other valves. Flare connections from high pressure pilot lines are also eliminated, minimizing sources for prospective leaks. The valves are an integrated assembly of (4) modules: 1) a body, which contains no moving parts, 2) a capacity cartridge, which contains both piston and modulating plug, and defines the port size and onto which the pilot solenoids providing the "S" (shut-off) or "B" (bypass) features are added as required, 4) the bonnet, containing the range spring and adjustment screw, which is set for the value of pressure which the valve is to maintain. The unique modular design allows the regulator to be soldered into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow revisions should an undersized or oversized condition be encountered, while pilot adapters can be changed out to add features or even change functions.

Retrofitting for additional evaporator capacity is simple and requires no pipe line revisions
• The piston and plug assembly can handle reduced flow conditions and controlling down to about 15% of the valve's maximum capacity
• 7/8" OD
• Designed entirely with corrosion resistant materials
• New cooler running coil and open frame coil housing
• New dual Voltage 208/240/60 Hz coil
• Conveniently located access fitting
• Pilot operated for close control at desired set-point
• Excellent regulation at light loads
• Interchangeable capacity cartridges
• Low pressure drop
• Few moving parts
• Long-life stainless steel diaphragms (no bellows to fail)
• Pilot electric shut-off
• All service from the top
• Sweat-in-place without disassembly
  
  

  SPORT-07-07

Parker commercial pressure regulator (S)PORT/(S)PORTII valves are designed with stainless steel bonnet bolts, adjusting stems, and piston and plug assemblies. The result is a regulator designed to withstand the rigorous application environment a low side regulator must endure. Models are available in combinations of connection sizes, port sizes and features as designated by the model code. Unlike some competitive models of low side regulators that utilize high pressure discharge gas as a pilot source, they are piloted with upstream pressure. This eliminates the requirement for hot gas headers, isolation devices, piping, and the labor associated with the installation of other valves. Flare connections from high pressure pilot lines are also eliminated, minimizing sources for prospective leaks. The valves are an integrated assembly of (4) modules: 1) a body, which contains no moving parts, 2) a capacity cartridge, which contains both piston and modulating plug, and defines the port size and onto which the pilot solenoids providing the "S" (shut-off) or "B" (bypass) features are added as required, 4) the bonnet, containing the range spring and adjustment screw, which is set for the value of pressure which the valve is to maintain. The unique modular design allows the regulator to be soldered into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow revisions should an undersized or oversized condition be encountered, while pilot adapters can be changed out to add features or even change functions.

Retrofitting for additional evaporator capacity is simple and requires no pipe line revisions
• The piston and plug assembly can handle reduced flow conditions and controlling down to about 15% of the valve's maximum capacity
• 7/8" OD
• Designed entirely with corrosion resistant materials
• New cooler running coil and open frame coil housing
• New dual Voltage 208/240/60 Hz coil
• Conveniently located access fitting
• Pilot operated for close control at desired set-point
• Excellent regulation at light loads
• Interchangeable capacity cartridges
• Low pressure drop
• Few moving parts
• Long-life stainless steel diaphragms (no bellows to fail)
• Pilot electric shut-off
• All service from the top
• Sweat-in-place without disassembly
  
  

  SPORT-09-09

Danfoss Liquid Line Filter Drier

Applications:
• 1/4" OD
• Traditional refrigeration
• Air conditioning units
• R1233zd(E); R1234yf; R1234ze(E); R134a; R22/R407C; R23; R32; R404A; R407F; R407H; R410A; R444B; R448A; R449A; R450A; R452A; R454A; R454C; R463A; R507A; R515B; R516A
• 1/4" Flare Access
• Transport refrigeration

023Z8261

Parker Gasket Kit

Used for A82, L Types Flo-Con Valves

Port Valve 13-21

Solenoid Valve 13-21

203818

DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensate drain line are fastened in place. The cover then snaps simply on top of the base. The SpeediChannel system is available in three widths  3, 4, and 6. Each piece of Speedi- Channel is 6-1/2 feet long. A complete line of couplings, elbows, and tees are available for the SpeediChannel system. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi- Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.

Diversitech 230-WC4

DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensate drain line are fastened in place. The cover then snaps simply on top of the base. The SpeediChannel system is available in three widths  3, 4, and 6. Each piece of Speedi- Channel is 6-1/2 feet long. A complete line of couplings, elbows, and tees are available for the SpeediChannel system. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi- Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.

Diversitech 230-D4

Kason Stainless Steel Door Closer for Kason 1094 Series Door

Kason 48-112

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

2" x 2" x 3/8"

Has a solid cross-ribbed design (3/8" thick)

Made from high quality elastomeric materials

Compounded for excellent resistance to aging, compression set & oil

Recommended maximum loading capacity: 50 Lbs.. per square inch

6732 BRAMEC