Amerikooler Gasket 05-503 38-1/8" x 76-1/4"

05-503

DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensate drain line are fastened in place. The cover then snaps simply on top of the base. The SpeediChannel system is available in three widths  3, 4, and 6. Each piece of Speedi- Channel is 6-1/2 feet long. A complete line of couplings, elbows, and tees are available for the SpeediChannel system. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi- Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.

Diversitech 230-LFB3

White Rodgers Cooling Controls Epoxy Powder Coated Builder Series Filter Drier

3/8" OD

ODF solid copper connections for easy install

Desiccant blend optimized for high water and acid capacity

Corrosion resistant epoxy powder paint finish

Maximum working pressure 680 psig (47 bar)

Compacted bead construction with 40 micron

BSL filters at both the inlet and outlet and retains contaminants during system cycling & vibration

BSB-083S

Straight Through Electronic Regulator Valve #4 7/8" OD

Bi-Polar Stepper Motor

Tight Seating Piston Design

Serviceable Construction

Construction Brass & Copper

Actuator Design Provides Great Resolution

CDST-4-7-20FT-S

Straight Through Electronic Regulator Valve #4 5/8" OD

Bi-Polar Stepper Motor

Tight Seating Piston Design

Serviceable Construction

Construction Brass & Copper

Actuator Design Provides Great Resolution



CDST-4-5-20FT-S

Straight Through Electronic Regulator Valve #7 1-3/8" OD

Bi-Polar Stepper Motor

Tight Seating Piston Design

Serviceable Construction

Construction Brass & Copper

Actuator Design Provides Great Resolution

CDST-7-11-20FT-S

Weather resistant; UV stabilized. Remain attractive and provide protection for years.

Protects from pets, pests, and vandals. Flat bottom channel and elbow hugs wall, eliminates insect, bird nests.

Three year warranty. Long lasting professional grade polymers.

Snap together design allows for quick installation, saving time and money.

Adjustable clips. Retainer clips can be positioned anywhere based on needs.

Tapered sides. Refined, low profile design helps to retain lineset.

Complete system. Covers and fittings for the majority of applications; available in a wide assortment of sizes, grades, and colors.

Wall duct kits. Everything to hide and protect lineset for a typical A/C installation in one box.

Heavy duty grade. For mini-splits, highvelocity and conventional ducted AC systems

Snap together design for quick installation

Stylish. Compliments any residential or commercial building

2 sizes, 4 color options

7.5 duct lengths. 6 lengths per box

Paintable.Brush, spray or roller to match or Complement custom colors. Follow paintmanufacturers recommendations for vinyl products

Temperature Range -4°F to 140°F

Emerson Flow NxT series is a balanced ported valve designed for high efficiency R-410A air conditioning and heat pump applications. NxT series valves operate over a wide range of conditions and applications, while offering excellent performance, superior reliability, and unparalleled valve life.

• R-410A
• 5/8" x 7/8" Straight Thru
• 8 Ton

The ORD valve is a pressure differential valve that responds to changes in the pressure difference across the valve, Figure 6 on the next page. The valve designation stands for Opens on Rise of Differential pressure. Therefore, the ORD is dependent on some other control valve or action for its operation. And in this respect, it is used with the ORI for head pressure control. As the ORI valve starts to throttle the flow of liquid refrigerant from the condenser, a pressure differential is created across the ORD. When the differential reaches setpoint, the ORD starts to open and bypasses hot gas to the liquid drain line. As the differential increases, the ORD opens further until its full stroke is reached at a differential of 10 psi above setpoint. Due to its function in the control of head pressure, the full stroke can be utilized in selecting the ORD. The standard pressure setting for the ORD is 20 psig. For systems where the pressure drop between the compressor and the receiver is higher than 14 psi, an ORD with a higher setting is available.

20 PSI

5/8" OD

ORD-4-20

Parker SCE-A-JW External Type SCE Expansion Valve Body 3/8" x 1/2" OD 1/2-1 Ton

SCE-A-JW

DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensate drain line are fastened in place. The cover then snaps simply on top of the base. The SpeediChannel system is available in three widths  3, 4, and 6. Each piece of Speedi- Channel is 6-1/2 feet long. A complete line of couplings, elbows, and tees are available for the SpeediChannel system. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi- Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.

Diversitech 230-CP4