Polymer Adhesives Sealant Systems Airseal 22 AS22-1 Smooth Water Based Duct Sealant, 1 Gallon, White

• Seals high pressure HVAC duct systems, metal, fiberglass, duct board and flex duct, all joints, seams and penetration in duct work
• Has excellent mold and mildew resistant
• 18 months in unopened container shelf life
• Cures to a tough, flexible film

,
,

Polymer Adhesives Sealant AS22-1

Polymer Adhesives Sealant AS22-1

Boss BOSS326 Silicone Red High Temperature 10 oz.

Boss BOSS326

Boss Silicone BOSS315 Clear NSF 10.3 oz.

BOSS315

12-quart bottles of Black Gold Vacuum Pump Oil. Black Gold Vacuum Pump Oil is the gold standard in vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed, meaning it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky. In extreme temperatures, the oil will be more resistant to contaminants. We still recommend, however, that the oil be changed after every evacuation for maximum performance and pump efficiency.
The best test to see if your oil is contaminated is through a micron gauge. With a leak-free system, if your DV-22N micron gauge is still not reading a deep vacuum, the oil is too contaminated and should be changed. If the micron gauge pulls down to about 50 microns the oil is good."

• Base: Mineral Oil
• Size: 1 qt.
• 12 in. long
• SAE Grade: 15
• ISO Viscosity Grade: 46
• Flash Point: 444.2 Degrees F
• Specific Gravity: 0.877
• Temp. Range: -29 Degrees to 514 Degrees F
• Viscosity @ 100C: 6.395 cSt
• Viscosity @ 40C: 41.54 cSt
• Viscosity Index: 102
• Application: For Use In Any Vacuum Pump
• Standards: ABB G12106, AGMA Grade 3 Non-EP, ASTM D4304 Type 1 Turbine Oil, Dennison Hyd HF-1, GEK 101941K-GEK46506e-GEK 27070, Solar Turbines ES9-224 II, Mil Spec MIL-L-17672D, US Steel 128

Sid Harvey Item #:DVO-12-12: Replaces Part #:'s : 41226,
,

JB Industries DVO-12-12

JB Industries DVO-12-12

JB Industries Black Gold DVO-24 VAC uum Pump Oil, 6 Gallon Bottle, Petroleum, Liquid, Clear - Yellow

• Black gold VAC uum pump oil is the gold standard in VAC uum pump care
• For use in any VAC uum pump, black gold is extremely pure and non-detergent
• Black gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous and more stable
• Result is clear mineral oil which will alert to contamination sooner as it becomes cloudy or milky
• In extreme temperatures, the oil will be more resistant to contaminants
• Oil be changed after every evacuation for maximum performance and pump efficiency
• Best test to see oil is contaminated is through a micron gauge, with a leak free system
• Viscosity is a measure of the weight of the oil
• For industrial oil, the viscosity is an ISO grading at 40 deg C
• Black gold VAC uum pump oil is an ISO 41, special to this type of application
• 21 cSt at 104 deg F

Sid Harvey Item #:DVO-24: Replaces Part #:'s : 41227,
,

JB Industries DVO-24

JB Industries DVO-24

RectorSeal EP-200 is a pre-measured, high grade epoxy and hardener formulated together in one stick, making it easy to break off the amount needed for each repair. RectorSeal epoxy putty bonds to most surfaces and hardens in 15 to 20 min. It can then be sanded, painted, drilled, taped and machined.

• Pressure tested to 1300 psi
• Can even harden under water
• Contains no asbestos
• No special tools required
• Permanent repair
• Premeasured resin and hardener in 1 tube
• Used to bond, seal, plug, mold and rebuild

,
,

RectorSeal EP200

RectorSeal EP200

RectorSeal EP400 Epoxy Putty Tube 4 oz Gray/White/Bronze 1.9 Specific Gravity,
,

RectorSeal EP400

RectorSeal EP400

Carlisle Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, fiberglass duct board, flex duct and duct fabric. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible and will not crack. Flex-Grip's excellent coverage rates and brush-on application provide low installed cost.

• Heavy brush-on and spray grade consistency
• Synthetic latex base
• Excellent water resistance

,
,

Carlisle FG550-1

Carlisle FG550-1

Fire Seal fireblocking caulk meets and exceeds standards for fireblocking/firestopping single-family residential construction. Fire Seal possesses superior adhesion and freeze-thaw characteristics and is the contractors #1 choice for fireblocking non-rated wood- frame construction. Fire Seal will not shrink, crack, or crumble upon cure. Fire Seal creates an air-tight barrier to prevent the passage of flames, smoke, and toxic gases from spreading area to area within concealed spaces.

• Great adhesion
• Smooth consistency
• Identifiable color
• Chemically compatible with flowguard gold blazemaster and corzan pipe fittings as well as all PVC, CPVC, ABS, PEX tubing and other applicable tested penetrating items
• Low VOC
• CPVC compatible
• Water-based type
• Silicate mortar chemistry
• 2 hr fire rating
• Glossy paste physical uncured state
• Solid mortor physical cured state
• Evaporation rate is slower than ether
• Volatiles is 35 - 39 % by weight at 21 deg F
• Excellent 5 cycles freeze - thaw stability

,

,

Everkem Diversified Products FS-136

Everkem Diversified Products FS-136

RectorSeal No. 5 pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2" and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded Galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Not recommended for use with ABS, CPVC pipe or oxygen, chlorine and other oxidizers.

• For use with potable water (hot or cold)
• Lead free and contains no other metals
• Soft setting, slow drying
• Brushable
• Will not dry out in the can
• Multi purpose - wide range of service uses
• For pressure up to 12000 psi (liquids) and 2600 psi (gases)
• Smooth easy application
• Permits easy break out with no damage to threads
• Economical - requires only a small amount
• Reduces friction to allow tighter joint makeup
• Lubricates and protects threads
• 2 years shelf life

Sid Harvey Item #:F3-63A: Replaces Part #:'s : 7G175,
,

RectorSeal F3-63A

RectorSeal F3-63A