|◀ ◀ 37 - 48 of 819 ▶ ▶|
View:
Item#:
AC&R-B
Penetrate HD frees stuck fan blades, blower shafts, pulleys, rusted nuts and bolts - any frozen, rusted or seized metal part! New low surface tension formula penetrates into the smallest spaces and breaks and dissolves the bonds of rust and corrosion. Lubricates and protects metals with a dielectric strength to 40000 VAC .
  • Super penetrating lubricant
  • Loosens rusted and frozen metal parts
  • Frees stuck fan blades, blower shafts, pulleys, rusted nuts and bolts, etc.
  • Saves time and labor
  • Lubricates and protects metals
  • Dielectric strength to 40000 VAC , low VOC formula 31000 VAC
  • Can be used with talon aerosol wand (4776-0)
,

,

ClenAir AK17

Item#:
AK17
Manufacturer Item:
61106
Manufacturer:
CLENAIR MANUFACTURING CO.,INC.
Penetrate HD frees stuck fan blades, blower shafts, pulleys, rusted nuts and bolts any frozen, rusted or seized metal part. New low surface tension formula penetrates into the smallest spaces and breaks and dissolves the bonds of rust and corrosion. Lubricates and protects metals with a dielectric strength to 40000 VAC (Low VOC formula for California 31000 VAC ). For industrial and professional use only. Specially formulated with new low surface tension technology to seep into the smallest cracks, crevices, seams or threads of rusted, seized and corroded parts.
  • Loosens rusted and frozen metal parts
  • Frees stuck fan blades, blower shafts, pulleys, rusted nuts and bolts, etc
  • Saves time and labor
  • Lubricates and protects metals
  • Dielectric strength to 40000 VAC
  • Specially formulated with new low surface tension technology to seep into the smallest cracks, crevices seams or threads of rusted, seized and corroded parts
,
,

Nu-Calgon AK12

Item#:
AK12
Manufacturer Item:
61105
Manufacturer:
CLENAIR MANUFACTURING CO.,INC.
Polymer Adhesives Sealant Systems Airseal 22 AS22-1 Smooth Water Based Duct Sealant, 1 Gallon, White
  • Seals high pressure HVAC duct systems, metal, fiberglass, duct board and flex duct, all joints, seams and penetration in duct work
  • Has excellent mold and mildew resistant
  • 18 months in unopened container shelf life
  • Cures to a tough, Flexible film
,
,

Polymer Adhesives Sealant AS22-1

Item#:
AS22-1
Manufacturer Item:
AS22-1
Manufacturer:
POLYMER ADHESIVES SEALANT SYST
Polymer Adhesives Sealant Systems Airseal 33 AS33-T-G Fiber Reinforced Water Based Duct Sealant, 10.5 oz Tube, Gray
  • Fast dry time
  • High solids content
  • Has excellent mold and mildew resistant
  • Seals high pressure HVAC duct systems, metal, fiberglass, duct board and flex duct, all joints, seams and penetration in duct work
  • 18 months in unopened container shelf life
,
,

Polymer Adhesives Sealant AS33-T-G

Item#:
AS33-T-G
Manufacturer Item:
AS33-T-G
Manufacturer:
POLYMER ADHESIVES SEALANT SYST
Provides a protective coating or gasket where parts must perform at temperatures up to 500°F.

Accmetric BOSS326

Item#:
BOSS326
Manufacturer Item:
32610
Manufacturer:
ACCUMETRIC, LLC
12-quart bottles of Black Gold Vacuum Pump Oil. Black Gold Vacuum Pump Oil is the gold standard in vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed, meaning it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky. In extreme temperatures, the oil will be more resistant to contaminants. We still recommend, however, that the oil be changed after every evacuation for maximum performance and pump efficiency.
The best test to see if your oil is contaminated is through a micron gauge. With a leak-free system, if your DV-22N micron gauge is still not reading a deep vacuum, the oil is too contaminated and should be changed. If the micron gauge pulls down to about 50 microns the oil is good."
  • Base: Mineral Oil
  • Size: 1 qt.
  • 12 in. long
  • SAE Grade: 15
  • ISO Viscosity Grade: 46
  • Flash Point: 444.2 Degrees F
  • Specific Gravity: 0.877
  • Temp. Range: -29 Degrees to 514 Degrees F
  • Viscosity @ 100C: 6.395 cSt
  • Viscosity @ 40C: 41.54 cSt
  • Viscosity Index: 102
  • Application: For Use In Any Vacuum Pump
  • Standards: ABB G12106, AGMA Grade 3 Non-EP, ASTM D4304 Type 1 Turbine Oil, Dennison Hyd HF-1, GEK 101941K-GEK46506e-GEK 27070, Solar Turbines ES9-224 II, Mil Spec MIL-L-17672D, US Steel 128
Sid Harvey Item #:DVO-12-12: Replaces Part #:'s : 41226,
,

JB Industries DVO-12-12

Item#:
DVO-12-12
Manufacturer Item:
DVO-12
Manufacturer:
JB INDUSTRIES
Everkem DP-44242 Leak Sealant W/Hose

Everkem DP-44242

Item#:
DP-44242
Manufacturer Item:
DP-44242
Manufacturer:
EVERKEM DIVERSIFIED PRODUCTS
JB Industries Black Gold DVO-24 VAC uum Pump Oil, 6 Gallon Bottle, Petroleum, Liquid, Clear - Yellow
  • Black gold VAC uum pump oil is the gold standard in VAC uum pump care
  • For use in any VAC uum pump, black gold is extremely pure and non-detergent
  • Black gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous and more stable
  • Result is clear mineral oil which will alert to contamination sooner as it becomes cloudy or milky
  • In extreme temperatures, the oil will be more resistant to contaminants
  • Oil be changed after every evacuation for maximum performance and pump efficiency
  • Best test to see oil is contaminated is through a micron gauge, with a leak free system
  • Viscosity is a measure of the weight of the oil
  • For industrial oil, the viscosity is an ISO grading at 40 deg C
  • Black gold VAC uum pump oil is an ISO 41, special to this type of application
  • 21 cSt at 104 deg F
Sid Harvey Item #:DVO-24: Replaces Part #:'s : 41227,
,

JB Industries DVO-24

Item#:
DVO-24
Manufacturer Item:
DVO-24
Manufacturer:
JB INDUSTRIES
RectorSeal EP-200 is a pre-measured, high grade epoxy and hardener formulated together in one stick, making it easy to break off the amount needed for each repair. RectorSeal epoxy putty bonds to most surfaces and hardens in 15 to 20 min. It can then be sanded, painted, drilled, taped and machined.
  • Pressure tested to 1300 psi
  • Can even harden under water
  • Contains no asbestos
  • No special tools required
  • Permanent repair
  • Premeasured resin and hardener in 1 tube
  • Used to bond, seal, plug, mold and rebuild
,
,

RectorSeal EP200

Item#:
EP200
Manufacturer Item:
97601
Manufacturer:
RECTORSEAL - HOUSTON
RectorSeal EP400 Epoxy Putty Tube 4 oz Gray/White/Bronze 1.9 Specific Gravity,
,

RectorSeal EP400

Item#:
EP400
Manufacturer Item:
97606
Manufacturer:
RECTORSEAL - HOUSTON
|◀ ◀ 37 - 48 of 819 ▶ ▶|
View: