|◀ ◀ 421 - 432 of 821 ▶ ▶|
View:
Nu-Calgon 4371-38 Thermo-Trap Heat Blocker Putty,

Nu-Calgon 4371-38

Item#:
4371-38
Manufacturer Item:
4371-38
Manufacturer:
NU-CALGON
Pan-Treat condensate tablets control odors can prevent overflows by plugged condensate drain lines. They can also be used on humidifiers. Pan-Treat is extremely easy to use, and is safe, non-corrosive, non-toxic and biodegradable. The product is completely soluble in water and it does not form any deposits in the pan or drain. Left untreated, condensate pans can suffer from the build-up of sludge, scum and other accumulations. This build-up can cause odors as well as plugged drains and overflows, which in turn result in water damage. Pan-Treat is formulated with ingredients proven effective in cleaning and preventing these deposits, and its use will eliminate the extra maintenance costs associated with odors, plugged drains and overflows.
  • Controls odors
  • Prevents overflows and water damage caused by plugged drain lines
  • Easy to install tablets completely dissolve, nothing to remove
  • Non-corrosive and non-toxic
  • For use in humidifiers too
  • 200 tablets per jar
Sid Harvey Item #:4296-60: Replaces Part #:'s : 24788,
,

Nu-Calgon 4296-60

Item#:
4296-60
Manufacturer Item:
4296-60
Manufacturer:
NU-CALGON
Pipe-Dri is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines, and other cold surfaces. Quickly adheres and dries to a hard water proof coating. Pipe-Dri's spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of 1" water pipe or eight square feet of flat surface area with two coats. Ideally, the product should be at room temperature (70- 75 deg F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80 deg F), however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120 deg F.

Nu-Calgon 4297-75

Item#:
4297-75
Manufacturer Item:
4297-75
Manufacturer:
NU-CALGON
Nickel-Safe ice machine cleaner is a specially formulated citric/phosphoric food-grade product for removing scale deposits from ice makers having nickel-plated or tin-plated evaporators. It is acceptable for use in machines made by Manitowoc and other manufacturers using nickel. In fact, it was the industry's first nickel-safe product, introduced in collaboration with Manitowoc. Usage rate should be in accordance with the manufacturers instructions or 16 fl oz with 3 Gallon of system water. The number one category of problems troubling an ice machine are water-related and the most frequently is lime scale. As the water is frozen into ice during an ice maker's cycle, the naturally occurring dissolved minerals in the water, some of which can combine to form lime scale, remain behind in the unfrozen recirculating ice water simply because water tries to freeze in its pure state. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit. As the scale begins to form, it creates a physical obstruction that results in: plugged distribution holes, restricted water flow and eventually the ice maker will hang-up or jam. Ice harvest is reduced and eventually the machine will shut down, requiring service. This sequence of events can affect both cubers and flakers. Some believe that flakers are free of scale problems since all of the water is made into ice. Not true. Flakers can scale-up as well, jamming the auger and eventually resulting in a broken belt or drive mechanism.
  • Nickel-safe ice machine cleaner is a specially formulated food-grade product
  • Complete family of liquid ice machine cleaners
  • Formulated for use in all makes and models of ice makers including those with nickel and tin plated evaporators
  • Functional in cubers, flakers, drum and tube machines
Sid Harvey Item #:4287-34: Replaces Part #:'s : F1-43A,
,

Nu-Calgon 4287-34

Item#:
4287-34
Manufacturer Item:
4287-34
Manufacturer:
NU-CALGON
Nickel-Safe ice machine cleaner is a specially formulated citric/phosphoric food-grade product for removing scale deposits from ice makers having nickel-plated or tin-plated evaporators. It is acceptable for use in machines made by Manitowoc and other manufacturers using nickel. In fact, it was the industry's first nickel-safe product, introduced in collaboration with Manitowoc. Usage rate should be in accordance with the manufacturers instructions or 16 fl oz with 3 Gallon of system water. The number one category of problems troubling an ice machine are water-related and the most frequently is lime scale. As the water is frozen into ice during an ice maker's cycle, the naturally occurring dissolved minerals in the water, some of which can combine to form lime scale, remain behind in the unfrozen recirculating ice water simply because water tries to freeze in its pure state. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit. As the scale begins to form, it creates a physical obstruction that results in: plugged distribution holes, restricted water flow and eventually the ice maker will hang-up or jam. Ice harvest is reduced and eventually the machine will shut down, requiring service. This sequence of events can affect both cubers and flakers. Some believe that flakers are free of scale problems since all of the water is made into ice. Not true. Flakers can scale-up as well, jamming the auger and eventually resulting in a broken belt or drive mechanism.Sid Harvey Item #:4287-08: Replaces Part #:'s : F1-43,
,

Nu-Calgon 4287-08

Item#:
4287-08
Manufacturer Item:
4287-08
Manufacturer:
NU-CALGON
RectorSeal Acid-Away 45004 Acid Neutralizer, 4 oz Bottle, Liquid, Acid-Away is a unique patented chemical treatment for use in air conditioning and refrigeration systems that have experienced a burnout, or operating systems that are showing a buildup in acid content. It circulates quickly throughout the system and chemically neutralizes acids that are always left in an air conditioning or refrigeration system after a burnout occurs. Once neutralized, this acid can no longer continue its corrosive attack and cause another burnout.Sid Harvey Item #:45004: Replaces Part #:'s : B12-007,

RectorSeal 45004

Item#:
45004
Manufacturer Item:
45004
Manufacturer:
RECTORSEAL - HOUSTON
Nu-Calgon GelTabs 4185-03 Condensate Pan Treatment Tablet, 12 Tube, 8.3, Solid, Fresh Gel Tabs are formulated with a breakthrough gel locking technology for treating air conditioning drain pans and lines. Keeps the drain pan from clogging and eliminates foul and musty odors. Four sizes are available: 3 Ton, 5 Ton, 15 Ton, and 20 Ton tabs. For added convenience, the 3 Ton and 5 Ton Gel Tabs are also offered in a bulk pack. The 3 Ton bulk pack contains 200 tabs, and the 5 Ton bulk pack contains 100 tabs. Multiple Gel Tabs can be added to the pan to acquire the necessary treatment for larger systems. Gel Tabs are easy to use. Put them into the drain pan and forget about them. When activated by condensation, the tablet will turn to gel and lock into place. This ensures that the tab will not move and potentially block the drain. Gel Tabs are designed to completely dissolve at an even rate over a 3 month period leaving nothing to remove when the product is done working.
  • Protects drain pan against clogs
  • Gel formulation locks tab into place
  • Completely dissolves
  • Up to 3 months of protection
  • Eliminates foul and musty odors
  • 12" tube Gel Tabs are formulated with a breakthrough gel locking technology for treating air conditioning drain pans and lines. Keeps the drain pan from clogging and eliminates foul and musty odors. Four sizes are available: 3 Ton, 5 Ton, 15 Ton, and 20 Ton tabs. For added convenience, the 3 Ton and 5 Ton Gel Tabs are also offered in a bulk pack. The 3 Ton bulk pack contains 200 tabs, and the 5 Ton bulk pack contains 100 tabs. Multiple Gel Tabs can be added to the pan to acquire the necessary treatment for larger systems. Gel Tabs are easy to use. Put them into the drain pan and forget about them. When activated by condensation, the tablet will turn to gel and lock into place. This ensures that the tab will not move and potentially block the drain. Gel Tabs are designed to completely dissolve at an even rate over a 3 month period leaving nothing to remove when the product is done working.Sid Harvey Item #:4185-03: Replaces Part #:'s : B17-001,
    ,

    Nu-Calgon 4185-03

Item#:
4185-03
Manufacturer Item:
4185-03
Manufacturer:
NU-CALGON
pH-treat is an in-line treatment product for the treatment of the condensate water produced by today's high efficiency furnaces. The condensate produced by these furnaces is acidic and must be neutralized prior to putting to the drain. In fact, some communities are passing regulations banning the discharge of acidic condensate. Introducing pH-Treat, a product to put on the drain line for the purpose of neutralizing the acid nature of the condensate water produced.,
,

Nu-Calgon 4720-06

Item#:
4720-06
Manufacturer Item:
4720-06
Manufacturer:
NU-CALGON
BBJ 490-06 Mold Control, 14 oz Aerosol Spray Can
  • Controls and inhibits microbial growth on cooling and airflow systems
  • Improves indoor air quality, reduces musty smells and other odors
  • Improves efficiency of operation
  • Concentrated formula can be applied with foggers, air compressors, or other aerosol methods
,
,

BBJ 490-06

Item#:
490-06
Manufacturer Item:
490-06
Manufacturer:
ATLANTIC CHEMICAL & EQUIPMENT
Coleman Manufacturing 50# OIL ABSORBENT Oil Absorbent 50 lb,
,

Coleman Manufacturing 50# OIL ABSORBENT

Item#:
50# OIL ABSORBENT
Manufacturer Item:
50# OIL ABSORBENT
Manufacturer:
COLEMAN MFG CO INC
  • ComStar International Inc. manufactures the most comprehensive product line of environmentally safe, industrial strength chemical products for trade professionals
    For over 50 years, ComStar has been a leader in developing, manufacturing and marketing over 360 proprietary products designed specifically for a breadth of applications used worldwide in the HVACR, plumbing, commercial and industrial maintenance industries
    ComStar is proud to be a business that uses smart-g rowth strategies and consistently employs talented individuals and strategic partners.
    Industrial Petrolic Corporation (IPC) was formed in New York in 1970 as a manufacturer and distributor of specialty chemical products for professionals in the heati and plumbing industries
  • In 1990, a group of investors founded ComStar to acquire IPC and expand the product line from 100 to over 360 products. Comstar diversified its offerings not only to the HVACR (heating, ventilation, air conditioning and refrigeration) industries, but also the hospitality, train, automo- tive, indoor air quality, precision parts and building maintenance industries

    Comstar 55-120

  • Item#:
    55-120
    Manufacturer Item:
    55-120
    Manufacturer:
    COMSTAR INTERNATIONAL INC
  • ComStar International Inc. manufactures the most comprehensive product line of environmentally safe, industrial strength chemical products for trade professionals
    For over 50 years, ComStar has been a leader in developing, manufacturing and marketing over 360 proprietary products designed specifically for a breadth of applications used worldwide in the HVACR, plumbing, commercial and industrial maintenance industries
    ComStar is proud to be a business that uses smart-g rowth strategies and consistently employs talented individuals and strategic partners.
    Industrial Petrolic Corporation (IPC) was formed in New York in 1970 as a manufacturer and distributor of specialty chemical products for professionals in the heati and plumbing industries
  • In 1990, a group of investors founded ComStar to acquire IPC and expand the product line from 100 to over 360 products. Comstar diversified its offerings not only to the HVACR (heating, ventilation, air conditioning and refrigeration) industries, but also the hospitality, train, automo- tive, indoor air quality, precision parts and building maintenance industries

    Comstar 60-630

  • Item#:
    60-630
    Manufacturer Item:
    60-630
    Manufacturer:
    COMSTAR INTERNATIONAL INC
    |◀ ◀ 421 - 432 of 821 ▶ ▶|
    View: