Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Harris T720-55 An all-purpose, low-temperature flux for use in silver brazing. Use with most ferrous and non ferrous metals, not recommended on aluminum, magnesium, and titanium.

Flux may be water thinned but care should be taken to avoid excess dilution
• Flux turns clear, (transparent), close to brazing application temperature
• Burns eyes and skin can be fatal if swallowed
• Fukes and gases can be hazardous to your health
• Heat rays, (infrared radiation) from flame or hot metal can injure eyes
  

Harris T720-53 Soldering Flux 32 oz Bottle

Lead free solder widely used in plumbing applications where lead-bearing solders are prohibited. Contains nickel, making joints tremendously strong. Wide range makes bridgit an excellent alloy for large diameter fittings and ill-fitted or non-concentric pipes. Fills gaps and caps off easily and effectively.

Designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering.

Harris T720-24E All-Braz Solder Kit

With some exceptions, these tin-lead solders can be used to join copper and most copper alloys, lead, nickel alloys and steel. Tin-lead solders are not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. These solders are also available with rosin or acid core.

It is illeGallon to use lead solders in both public and private potable water systems
• Lead-bearing solders are not to be used in potable water systems
• 360 deg F solidus
• Black color
  

Harris 95561 Lead Free Solder, 1/8", 1 lb Spool

Tin-antimony solder well suited for applications where moderately elevated temperature is a factor
• With higher electrical conductivity and high fluidity, 95/5 is recommended for lead free installation of small diameter, tight fitting connections
• Not recommended for use on brass or HVAC connections
• 95 - 5 tin/antimony solder is a low temperature lead free solder with a narrow melting range
• The rapid melting characteristics require close fitting connections as it is difficult bridge or fill wide clearance
  

Harris ZN78CW09420POP Flux Cored Aluminum Brazing Alloy 800-900 Degrees

Oatey Climate Smooth Hercules 10619 Soldering Paste, 9 oz, Bottle, Amber,

Utility Enterprises 14-220 Soldering Flux, 16 oz, Tan, 24/Case

Self cleaning
• Lead free flux specially formulated for sweat fitting work
• Makes solder flow freely and tin perfectly, recommended for all soft solder work, including 95/5
• Removes oxidation and prepares copper, lead, brass, tin, stainless steel, cast and wrought iron for the proper bonding of solder to metal assuring leak-tight joints
  

Utility Enterprises The original self cleaning, lead free flux specially formulated for sweat fitting work. It removes oxidation and prepares copper, lead, brass, tin, stainless steel, cast and wrought iron for the proper bonding of solder to metal assuring leak-tight joints. It makes the solder flow freely and tin perfectly. It's recommended for all soft solder work, including 95/5. Meets federal specification 0-F-506.

Nokorode Pre­Tinning Paste Flux is a creamy­smooth paste specifically formulated with a small amount of 95/5 tin/antimony solder powder in the formula and a heat indicator. It is formulated to clean, pretin and flux the joint all at one time. Provides a fast, safe method of fluxing most common metals and solders. Excellent for use on larger diameters fittings or faster solderings of smaller diameter fittings because it automatically tins before reaching higher temperature.,