Thermo Pride AH4260AE1 Air Handler Hydro 3-1/2-5 Ton ECM Motor115 VAC

Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  
  

  Thermo Pride AH4260AE1

Thermo Pride AH2436AE1 Air Handler Hydro 2-3 Ton ECM Motor115 VAC

Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  Thermo Pride AH2436AE1
  
  

  Thermo Pride AH2436AE1

Bosch BVA-24WN1-M20 Air Handler

Bosch BVA-24WN1-M20

Advance Distributers Pre-Painted Galvanized Heavy Gauge Steel Air Handler with Piston Metering and Slant Coil, 24000 BTU, 2 Ton, 12.5 kw, 208/240 VAC

Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 6" width x 9" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (A3)
• 0 and 5 kw, hot water standard stripped wire
• 13-1/2" width x 17" depth supply duct opening
• 10-1/4" width x 17-1/4" depth return duct opening

Advance Distributers BCRMA3124-S01

Bosch BVA-60WN1-M18 Air Handler

• 5 Ton 15 SEER Multi-Position Factory Installed TXV
• Multi-speed ECM blower motor.
• Factory-installed TXV metering.
• Multi-position Installation - upflow or horizontal right standard;
• field convertible to horizontal left or downflow.
• Multiple electrical entry locations.
• Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
• Dual front panel design for ease of maintenance.
• Blower and coil easy slide out for ease of maintenance.
• Fully-insulated cabinet design.
• Horizontal and vertical condensate drain pans standard.
• Condensate drain pan is polymer with UVC inhibitor.
• Primary and secondary condensate drain fittings.
• Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
• Integrated filter rack with tool-less door access.
• AHRI and ETL Listed.,
  
  

Allstyle Coil Outdoor air conditioner designed for ground level or rooftop installations These units offer comfort and dependability for Single and Multi-Family residential applications A painted louvered steel cabinet encompasses the exterior with a easily accessible control box Removing just one screw and the electrical control box cover slides down giving full access to all operating controls. Condenser coils are constructed with Aluminum tubing and fins Condensers are equipped with a Grille/Motor mount for quiet fan operation Inquire about our refrigerant compatible units

Allstyle Coil BC60-14D-322G

Allstyle Coil Outdoor air conditioner designed for ground level or rooftop installations These units offer comfort and dependability for Single and Multi-Family residential applications A painted louvered steel cabinet encompasses the exterior with a easily accessible control box Removing just one screw and the electrical control box cover slides down giving full access to all operating controls. Condenser coils are constructed with Aluminum tubing and fins Condensers are equipped with a Grille/Motor mount for quiet fan operation Inquire about our refrigerant compatible units

Allstyle Coil BC24-14D-201G

Advance Distributers Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with Piston Metering and A-Coil, 60000 BTU, 5 Ton, 25 kw, 120 VAC

Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 10" width X 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number
• 0 and 5 kw, hot water standard stripped wire
• 20-1/2" width X 21" depth supply duct opening
• 17-3/4" width X 22" depth return duct opening
  
  

  Advance Distributers BCRMD1660-S3N4

Bosch BVA-48WN1-M18 Air Handler

4 Ton 18 SEER Multi-Position Factory Installed TXV
• Multi-speed ECM blower motor.
• Factory-installed TXV metering.
• Multi-position Installation - upflow or horizontal right standard;
• field convertible to horizontal left or downflow.
• Multiple electrical entry locations.
• Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
• Dual front panel design for ease of maintenance.
• Blower and coil easy slide out for ease of maintenance.
• Fully-insulated cabinet design.
• Horizontal and vertical condensate drain pans standard.
• Condensate drain pan is polymer with UVC inhibitor.
• Primary and secondary condensate drain fittings.
• Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
• Integrated filter rack with tool-less door access.
• AHRI and ETL Listed.,
  
  

  Bosch BVA-48WN1-M18

Advance Distributers Pre-Painted Galvanized Heavy Gauge Steel Air Handler

Multi-Position 1-1/2-2 Ton 115 VAC 3 Speed Motor TXV R22

Advance Distributers BCRMA7624-S2N4

Advance Distributers Pre-Painted Galvanized Heavy Gauge Steel Air Handler with Piston Metering and Slant Coil, 36000 BTU, 3 Ton, 20 kw, 120 VAC

Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 8" width x 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (B6)
• 0 and 5 kw, hot water standard stripped wire
• 17" width x 17" depth supply duct opening
• 14" width x 17-1/4" depth return duct opening
  
  

  Advance Distributers BCRMB6136-S03

Advance Distributers Pre-Painted Galvanized Heavy Gauge Steel Air Handler with Piston Metering and Slant Coil, 24000 BTU, 2 Ton, 12.5 kw, 120 VAC

Rifled copper tubing, patented lance fin design

High efficiency 3-speed motors

Dynamically balanced blowers for quiet, vibration-free operation

Drain pans are molded of corrosion proof engineering polymer

Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)

Filter rack with filter - built into every air handler

Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits

Fan time delay available as kit or factory installed

Easily converted to counterflow with kit

All coils are individually pressure tested at 450 psi, then pressurized and sealed

6" width x 9" diameter wheel

Constant speed, 3-speed blower motor

Right hand refrigerant and drain connection

Slab number (A3)

0 and 5 kw, hot water standard stripped wire

13-1/2" width x 17" depth supply duct opening

10-1/4" width x 17-1/4" depth return duct opening

Advance Distributers BCRMA3124-S03