SharkBite Ball Valves are the easiest way to install or replace a shut-off valve into your potable water or hydronic water heating system. The push-fit connections allow you to join to copper, PEX, CPVC or PE-RT pipe in any combination without a need for soldering, clamps, glue or unions. The valve is easily rotated after installation making it easier to reach the shutoff, or to work in tight spaces.

• High quality forged brass ball valves with SharkBite connections
• Convenient single lever control: Makes them easy to use and encourages shut-off of water supply
• Full port ball valve: Allows water to flow freely through valve
• Instant push-to-connect connections for increased ease of use: No soldering, clamps, unions, or glue required
• Valve assembled to strict quality standards: Measured thread engagement, measured torque
• Water service
• Brass body end retainer and packing nut, Zinc plated steel handle nut, stainless steel grab ring
• Veradel tube support liner

,
,

Sharkbite 22185-0000

Kessler CPEC34 PRESS Coupling 3/4" Press x Press,
,

Kessler CPEC34

Along with soldering, brazing, threading, and grooving, press technology has become a standard joining solution for trade professionals. The popularity of press technology in the joining of copper systems inevitably led to the development of its use with other materials, particularly steel. Over the past years, there has been an increased acceptance and use of press technology with steel system applications such as mechanical, sprinkler, steam, and LP/natural gas. During this time, our development team learned a lot about the unique challenges associated with the press joining of steel. As a result, Streamline STL and Streamline STL-G Carbon Press Fittings incorporate several thoughtful performance features to provide an improved fitting and more reliable joint. These evolutionary advancements have focused on delivering greater ease of installation and increasing modern press technology reliability. We understand that press tools and jaw sets are expensive investments for the contractor and costly inventory items for wholesalers. Therefore, we focused on improvements to the seal and grip mechanics rather than the fittings shape/pattern designs. Because of this, Streamline STL and Streamline STL-G Carbon Press Fittings are compatible with most tools and jaws on the market, making use easy and cost-effective. Our efforts aimed and succeeded at providing a superior fitting while also reducing the need for reinvestment by the contractor or excessive SKU proliferation for the wholesaler

Mueller Press Gas Fittings CP114X114X1FT

Along with soldering, brazing, threading, and grooving, press technology has become a standard joining solution for trade professionals. The popularity of press technology in the joining of copper systems inevitably led to the development of its use with other materials, particularly steel. Over the past years, there has been an increased acceptance and use of press technology with steel system applications such as mechanical, sprinkler, steam, and LP/natural gas. During this time, our development team learned a lot about the unique challenges associated with the press joining of steel. As a result, Streamline STL and Streamline STL-G Carbon Press Fittings incorporate several thoughtful performance features to provide an improved fitting and more reliable joint. These evolutionary advancements have focused on delivering greater ease of installation and increasing modern press technology reliability. We understand that press tools and jaw sets are expensive investments for the contractor and costly inventory items for wholesalers. Therefore, we focused on improvements to the seal and grip mechanics rather than the fittings shape/pattern designs. Because of this, Streamline STL and Streamline STL-G Carbon Press Fittings are compatible with most tools and jaws on the market, making use easy and cost-effective. Our efforts aimed and succeeded at providing a superior fitting while also reducing the need for reinvestment by the contractor or excessive SKU proliferation for the wholesaler

Mueller Press Gas Fittings CP01539G

Along with soldering, brazing, threading, and grooving, press technology has become a standard joining solution for trade professionals. The popularity of press technology in the joining of copper systems inevitably led to the development of its use with other materials, particularly steel. Over the past years, there has been an increased acceptance and use of press technology with steel system applications such as mechanical, sprinkler, steam, and LP/natural gas. During this time, our development team learned a lot about the unique challenges associated with the press joining of steel. As a result, Streamline STL and Streamline STL-G Carbon Press Fittings incorporate several thoughtful performance features to provide an improved fitting and more reliable joint. These evolutionary advancements have focused on delivering greater ease of installation and increasing modern press technology reliability. We understand that press tools and jaw sets are expensive investments for the contractor and costly inventory items for wholesalers. Therefore, we focused on improvements to the seal and grip mechanics rather than the fittings shape/pattern designs. Because of this, Streamline STL and Streamline STL-G Carbon Press Fittings are compatible with most tools and jaws on the market, making use easy and cost-effective. Our efforts aimed and succeeded at providing a superior fitting while also reducing the need for reinvestment by the contractor or excessive SKU proliferation for the wholesaler

Mueller Press Gas Fittings CP11205G

Along with soldering, brazing, threading, and grooving, press technology has become a standard joining solution for trade professionals. The popularity of press technology in the joining of copper systems inevitably led to the development of its use with other materials, particularly steel. Over the past years, there has been an increased acceptance and use of press technology with steel system applications such as mechanical, sprinkler, steam, and LP/natural gas. During this time, our development team learned a lot about the unique challenges associated with the press joining of steel. As a result, Streamline STL and Streamline STL-G Carbon Press Fittings incorporate several thoughtful performance features to provide an improved fitting and more reliable joint. These evolutionary advancements have focused on delivering greater ease of installation and increasing modern press technology reliability. We understand that press tools and jaw sets are expensive investments for the contractor and costly inventory items for wholesalers. Therefore, we focused on improvements to the seal and grip mechanics rather than the fittings shape/pattern designs. Because of this, Streamline STL and Streamline STL-G Carbon Press Fittings are compatible with most tools and jaws on the market, making use easy and cost-effective. Our efforts aimed and succeeded at providing a superior fitting while also reducing the need for reinvestment by the contractor or excessive SKU proliferation for the wholesaler

Mueller Press Gas Fittings CP03055G

Along with soldering, brazing, threading, and grooving, press technology has become a standard joining solution for trade professionals. The popularity of press technology in the joining of copper systems inevitably led to the development of its use with other materials, particularly steel. Over the past years, there has been an increased acceptance and use of press technology with steel system applications such as mechanical, sprinkler, steam, and LP/natural gas. During this time, our development team learned a lot about the unique challenges associated with the press joining of steel. As a result, Streamline STL and Streamline STL-G Carbon Press Fittings incorporate several thoughtful performance features to provide an improved fitting and more reliable joint. These evolutionary advancements have focused on delivering greater ease of installation and increasing modern press technology reliability. We understand that press tools and jaw sets are expensive investments for the contractor and costly inventory items for wholesalers. Therefore, we focused on improvements to the seal and grip mechanics rather than the fittings shape/pattern designs. Because of this, Streamline STL and Streamline STL-G Carbon Press Fittings are compatible with most tools and jaws on the market, making use easy and cost-effective. Our efforts aimed and succeeded at providing a superior fitting while also reducing the need for reinvestment by the contractor or excessive SKU proliferation for the wholesaler

Mueller Press Gas Fittings CP02822G

Along with soldering, brazing, threading, and grooving, press technology has become a standard joining solution for trade professionals. The popularity of press technology in the joining of copper systems inevitably led to the development of its use with other materials, particularly steel. Over the past years, there has been an increased acceptance and use of press technology with steel system applications such as mechanical, sprinkler, steam, and LP/natural gas. During this time, our development team learned a lot about the unique challenges associated with the press joining of steel. As a result, Streamline STL and Streamline STL-G Carbon Press Fittings incorporate several thoughtful performance features to provide an improved fitting and more reliable joint. These evolutionary advancements have focused on delivering greater ease of installation and increasing modern press technology reliability. We understand that press tools and jaw sets are expensive investments for the contractor and costly inventory items for wholesalers. Therefore, we focused on improvements to the seal and grip mechanics rather than the fittings shape/pattern designs. Because of this, Streamline STL and Streamline STL-G Carbon Press Fittings are compatible with most tools and jaws on the market, making use easy and cost-effective. Our efforts aimed and succeeded at providing a superior fitting while also reducing the need for reinvestment by the contractor or excessive SKU proliferation for the wholesaler

Mueller Press Gas Fittings CP11423G

Along with soldering, brazing, threading, and grooving, press technology has become a standard joining solution for trade professionals. The popularity of press technology in the joining of copper systems inevitably led to the development of its use with other materials, particularly steel. Over the past years, there has been an increased acceptance and use of press technology with steel system applications such as mechanical, sprinkler, steam, and LP/natural gas. During this time, our development team learned a lot about the unique challenges associated with the press joining of steel. As a result, Streamline STL and Streamline STL-G Carbon Press Fittings incorporate several thoughtful performance features to provide an improved fitting and more reliable joint. These evolutionary advancements have focused on delivering greater ease of installation and increasing modern press technology reliability. We understand that press tools and jaw sets are expensive investments for the contractor and costly inventory items for wholesalers. Therefore, we focused on improvements to the seal and grip mechanics rather than the fittings shape/pattern designs. Because of this, Streamline STL and Streamline STL-G Carbon Press Fittings are compatible with most tools and jaws on the market, making use easy and cost-effective. Our efforts aimed and succeeded at providing a superior fitting while also reducing the need for reinvestment by the contractor or excessive SKU proliferation for the wholesaler

Mueller Press Gas Fittings CP02834G