|◀ 265 - 276 of 710 ▶|
View:
Senses outdoor temperature and humidity to display on RedLINK enabled thermostats and accessories.
  • Powered by RedLINK reliability
  • No interference with other wireless devices in the home
  • Reliable performance in all climates
  • Installs in minutes
  • Up to 5 years battery life
  • 2 months low battery warning
  • Battery warning displayed on RedLINK enabled thermostats
  • Used with RedLINK enabled thermostats and accessories
  • Vertical mounting with supplied bracket and mounting hardware
  • Thermistor sensor element
  • - 1% RH condensing
Sid Harvey Item #:C7089R1013: Replaces Part #:'s : 41153,
,

Honeywell C7089R1013

Item#:
C7089R1013
Manufacturer Item:
C7089R1013
Manufacturer:
HONEYWELL
Honeywell Home C7189R1004/U Arctic White Wireless Indoor Air Temperature and Humidity Sensor, 0 - 120 deg F
  • Used to sense temperature if the thermostat is installed in a poor temperature sensing location
  • Small remote temperature sensor to match any room decor
  • Easy to install and use
  • Factory calibrated, no field calibration required
  • Mounts on a vertical wall with supplied bracket and mounting hardware
  • Sense temperature and humidity remotely, average temperature and humidify and dehumidify in separate location
,
,

Honeywell C7189R1004

Item#:
C7189R1004
Manufacturer Item:
C7189R1004
Manufacturer:
HONEYWELL
Honeywell Home C7189R2002-2 Redlink T10 2 Pack Room Sensor

Honeywell C7189R2002-2

Item#:
C7189R2002-2
Manufacturer Item:
C7189R2002-2
Manufacturer:
HONEYWELL
Honeywell Home ERM5220R1018/U Gray Programmable Equipment Remote Module, Up to 2 Heat/2 Cool Heat Pump or Conventional, 24 VAC
  • The Honeywell Home ERM is like a new cordless tool in your toolbox, pull it out whenever it's too costly or time-consuming to run wires from a condensing unit or boiler to control devices
  • There are fewer holes to drill and wires to run, just faster, easier installation that gives you more profit per job, make the Honeywell Home ERM your go-to choice for fast, easy equipment installation
  • Eliminates the need to run additional wires to your equipment, for example during a heat pump upgrade
  • Suitable for outdoor use
  • Temperature sensor terminals for outdoor temp sensors or indoor freeze protection
  • LED for easy installation checkout
  • May reduce damage to homes since wiring/drilling is eliminated
  • Attach the ERM to the wall near the compressor or boiler, the location should be at least 3 feet above ground and oriented with the 2-wire exits facing downward mounting
  • Compressor, boiler connected LEDs
,
,

Honeywell ERM5220R1018

Item#:
ERM5220R1018
Manufacturer Item:
ERM5220R1018
Manufacturer:
HONEYWELL
Mitco E397-118 Limit Switch Kit

Mitco E397-118

Item#:
E397-118
Manufacturer Item:
E397-118
Manufacturer:
MITCO MFG.
Mitco E397-119 High & Low Furnace Switch Kit

Mitco E397-119

Item#:
E397-119
Manufacturer Item:
E397-119
Manufacturer:
MITCO MFG.
  • All Pucks in the Flair system must be Puck Pros. Secondary Heat features will not be enabled if any Pucks in the system are not Puck Pros.
  • Prior to arriving at the job site, download the Flair App and create your Flair account and contractor account (instructions below).
  • Install smart thermostat and mini splits in the home prior to installing Flair. Smart thermostat must be an ecobee or Honeywell smart thermostats.
  • During Flair Setup, keep all Flair Puck Pros in the same room. This will ensure devices are in good range to be discovered by Flair during Setup. Pucks can be installed in their final location after Setup.
  • Youll need the customers login information for their smart thermostat and 2.4 GHz home WiFi network. Note: Flair will not see 5.0 GHz WiFi networks. Most routers have dual band capability to broadcast both 2.4 and 5 GHz frequencies.
  • When naming rooms in the Flair App, choose names that reflect where the devices will be located (ex: Master Bedroom or Kitchen). This is helpful for the customer.

    Flair FLAIRPUCK001P

  • Item#:
    FLAIRPUCK001P
    Manufacturer Item:
    FLAIRPUCK001P
    Manufacturer:
    RECTORSEAL - HOUSTON
    White Rodgers Cooling Controls wired remote indoor temperature sensor F145-1328. This sensor is perfect for securing the thermostat in one area or room while sensing temperature in the conditioned space. This sensor also can be used to manage dual fuel and lock-out expensive auxiliary heat in heat pump applications.
    • 18 or 20 ga, 3-conductor shielded cable recommended
    • 300 feet maximum distance from thermostat

      White Rodgers F145-1328

    Item#:
    F145-1328
    Manufacturer Item:
    F145-1328
    Manufacturer:
    WHITE-RODGERS DIV OF COPELAND
    Sealed Unit Parts F336 Universal Extra Key for BTG Guards

    Sealed Unit Parts F336

    Item#:
    F336
    Manufacturer Item:
    F336
    Manufacturer:
    SEALED UNIT PARTS CO, INC
    White Rodgers Cooling Controls wired remote outdoor temperature sensor F145-1378. This sensor will display the current outdoor temperature on the thermostat. This sensor also can be used to manage dual fuel and lock-out expensive auxiliary heat in heat pump applications.
    • 18 or 20 ga, 3-conductor shielded cable recommended
    • 300 feet maximum distance from thermostat

      White Rodgers F145-1378

    Item#:
    F145-1378
    Manufacturer Item:
    F145-1378
    Manufacturer:
    WHITE-RODGERS DIV OF COPELAND
    ICM Controls FS1500L Non-Programmable Garage Thermostat
    • 1 Heat 24 Vac 35-75 Degrees
      Frost Sentry Garage Thermostat
      This easy-to-operate garage thermostat allows you to maintain temperature to your garage/storage area. Attractive, extra-rugged, highly reliable and accurate, this thermostat will look and perform like new for years to come. Ideal for garages, warehouse, storage facilities, etc

      ICM Controls FS1500L

    Item#:
    FS1500L
    Manufacturer Item:
    FS1500L
    Manufacturer:
    ICM INTERNATIONAL
    Lux Products GEO-WH-003 7 Day 2Heat/2 Cool Smart Features:
  • Easy, online programming
  • Automatic adjustment of start times influenced by local conditions
  • Radius (Geofencing): user set radius with smartphones
  • High & low temp alerts
  • Provides recommended settings for maximum savings
  • Energy use and run-time monitor Works With:
  • Amazon Alexa
  • Google Assistant Connectivity:
  • 2.4GHz: 802.11 b/g/n
  • SHA256RSA data encryption
  • Network commissioning through iOS/Android app or WPS
  • Program and system settings stored on the device for set up and function with or without WiFi Compatible With:
  • Universal compatibility for conventional heat & A/C up to2-stage heat/2-stage cool
  • Universal compatibility for heat pumps with up to 2-stage heat/1-stage cool (including AUX/EMERG heat)
  • 2 & 3-wire heat only hydronic systems (hot water baseboard & radiator)
  • Gas Millivolt heaters Not Compatible With:
  • Not Compatible with 120V/240V line voltage systems
  • Not Compatible with Heat pumps with (Y2) two compressor stages

    Lux Products GEO-WH-003

  • Item#:
    GEO-WH-003
    Manufacturer Item:
    GEO-WH-003
    Manufacturer:
    LUX PRODUCTS CORPORATION
    |◀ 265 - 276 of 710 ▶|
    View: