Jomar Valve The Original Blue Cap T-203 Hot Forged Brass 2-Piece 1/4 Turn Standard Port Gas Ball Valve with Side Tap, 3/4", FIP

Eliminates need for test tee and labor to install
• Ideal for use outside in extremely cold climates
• Removable plug enables port for pressure gauge
• Valve can be locked in the closed position by reversing the handle
• (2) viTon o-ring
• 1/8" side tap
• 100% leak tested
• 100% made in Italy
• Leakproof stem - lifetime warranty
• Steel - geomet plated
• Brass end connection and side tap plug and cap, buna-N side tap washer
  
  

  Jomar Valve 102-304

Bell & Gossett 101231 Check-Trol Isolation Flow Control Flange 3/4" FPT

Bell & Gossett 101231

Legend Valve 105-506 Bronze Traditional Wye Strainer, 1-1/4", FNPT, 20 Mesh

Full pattern heavy-duty bronze body
• Equipped with 304 stainless steel 20 - mesh screen or 1/16" hole diameter perforated strainer
• Square-head closure plug furnished
• Ideal for protecting downstream components, by trapping and holding debris
• ASTM B-584 UNS C84400 bronze cap
• ASTM A-240 UNS S30400 304 stainless steel screen or strainer
• Commercial grade nitrilic bonded non-asbestos fiber cap gasket
• ASTM B-584 UNS C83600 bronze closure blowoff plug
• 1/2" NPT plug
  
  

  Legend Valve 105-506

Jomar Valve T-204 Brass T-Handle 2-Piece Gas Ball Valve, 3/4", FNPT

Valve can be locked in the closed position by reversing the handle
• (2) viTon o-rings
• 100% leak tested
• 100% made in Italy
• Leak proof stem - lifetime warranty
• Brass end connection, geomet plated steel handle screw
  
  

  Jomar Valve 101-404

Jomar Valve 102-404 Brass 2-Piece 1/4-Turn Standard Port Gas Ball Valve with Side Tap, 5/8", Flare

Eliminates need for test tee and labor to install
• Ideal for use outside in extremely cold climates
• Removable plug enables port for pressure gauge
• Valve can be locked in the closed position by reversing the handle
• (2) viTon o-rings
• 1/8" side tap
• 100% leak tested
• 100% made in Italy
• Leak proof stem - lifetime warranty
• Steel - geomet plated
• Brass end connection and side tap plug
  
  

  Jomar Valve 102-404

Jomar Valve The Original Blue Cap T-203 Hot Forged Brass 2-Piece 1/4 Turn Standard Port Gas Ball Valve with Side Tap, 1/2", FIP

Eliminates need for test tee and labor to install
• Ideal for use outside in extremely cold climates
• Removable plug enables port for pressure gauge
• Valve can be locked in the closed position by reversing the handle
• (2) viTon o-ring
• 1/8" side tap
• 100% leak tested
• 100% made in Italy
• Leakproof stem - lifetime warranty
• Steel - geomet plated
• Brass end connection and side tap plug and cap, buna-N side tap washer
  
  

  Jomar Valve 102-303

Legend Valve T-3100 Forged Brass Handle 1-Piece 1/4 Turn Gas Ball Valve with Side Tap, 3/4", FNPT

Patented 1-piece forged brass body eliminates the possibility of seam leaks common to 2-piece body designs
• Chrome plated ball and soft seats resist contamination build-up and offer a positive seal in low- or moderate-pressure gas applications
• 1/4-turn, ball type, forged brass design is more compact and superior to traditional cast bronze or cast iron gas cocks
• The 175 psi pressure rating permits high-pressure air tests, without the grease-seal blowout common to plug-type gas cocks
• 2-different configurations, to accommodate all gas connection types
• Equipped with an integral 1/8" NPT tapped manometer test port and plug, eliminating the need for a separate test port fitting and shut-off valve near the appliance pilot assembly
• Commercial grade synthetic fiber thrust washer
• ASTM B-124 UNS C37700 forged brass stem retainer bushing and test port plug
• ASTM B-159 phosphor bronze wire stem retainer clip
• ANSI/ASME B18.2.1 IFI C18 zinc plated steel handle screw
• Commercial grade, die-cast aluminum coated handle
• Type 7PB496 ASTM D-2000 nitrile (NBR) rubber stem o-ring
  
  

  Legend Valve 102-514L

Jomar Valve The Original Blue Cap T-204 Hot Forged Brass T-Handle 2-Piece 1/4 Turn Standard Port Gas Ball Valve, 1/2", FIP

Valve can be locked in the closed position by reversing the handle
• (2) viTon o-ring
• 100% leak tested
• 100% made in Italy
• Leakproof stem - lifetime warranty
• Steel - geomet plated
• Brass end connection
  
  

  Jomar Valve 101-403

Jomar Valve 101-403DU Dielectric Gas Ball Valve 1/2" Union End

Jomar Valve 101-403DU

B & K Water 101-002 Swing Check Valve 3/8" FPT
The B and K valves are precisely engineered for outstanding service, long life and reliable performance. These valves offer easy operation, superior flow and include a wide range of water/oil/gas (WOG) valves, gas valves and water valves constructed from forged brass, CPVC and PVC materials. Valves are arranged in series reflecting the valves performance characteristics, connection types and handle style. B&K valves are created to meet UPC and ICC plumbing code requirements and are certified to meet NSF 61 with many available in lead-free compliant versions.

B & K Water 101-002

Bell & Gossett 101231 Check-Trol Isolation Flow Control Flange 1" OD

Bell & Gossett 101237

Jomar Valve The Original Blue Cap T-203 Hot Forged Brass 2-Piece 1/4 Turn Standard Port Gas Ball Valve with Side Tap, 3/8", Flare

Eliminates need for test tee and labor to install
• Ideal for use outside in extremely cold climates
• Removable plug enables port for pressure gauge
• Valve can be locked in the closed position by reversing the handle
• (2) viTon o-ring
• 1/8" side tap
• 100% leak tested
• 100% made in Italy
• Leakproof stem - lifetime warranty
• Steel - geomet plated
• Brass end connection and side tap plug
  
  

  Jomar Valve 102-402