Diversitech HPR-12 is a one piece 12". gray heat pump riser that provides an additional 12". of elevation under heat pumps, air handlers, or other equipment. Heat pump risers are most commonly used to lift heat pumps above the snow line. This helps prevent damage to the coils caused by ice build up from drainage of condensate when operating in heat pump mode. Heat pump risers are available in 1 or 2 piece designs, multiple sizes and colors.

Diversitech HPR-12

Our Dura-Blok products gives you a versatile and long-term solution for all your roof top support needs. Designed with flexibility in mind, Dura-Blok is ideal for roof top support applications such as pipe, HVAC, duct, conduit, cable tray, and roof walkways. Manufactured to provide years of service in harsh, roof top environments, Dura-Blok is made from 100% recycled rubber, require no supplemental rubber pads, and will not float or blow away. 1" (25.4) gaps between blocks allow water to flow freely around longer assemblies. For added strength, the Dura-Blok support channel is through bolted on all sizes. For added visibility, a reflective strip is incorporated on both sides of each Dura-Blok. Beyond product durability, Dura-Blok helps to dampen vibration, are not sharp or abrasive and require no roof penetration to maximize existing roof life and roof structural and environmental integrity.

• Base with 14 gauge (1.9 mm) Galvanized channel 1" height (25.4 mm)
• 100% recycled rubber, UV resistant
• Load rating - ultimate uniform load
• The Dura-Blok is UV resistant and suitable for any type of roofing material or other flat surfaces

RectorSeal Big Foot Fix-It-Foot Riser

Rubber/Aluminum 16"



RectorSeal RMB16

RectorSeal Condenser Wall Bracket

300 Lbs.. Stainless



WBB-300SS

Mason Industries Anti-Vibration Pads

18" x 18" x 3/4"

Vibration Waffle Pad

Pad Size 18" Length x 18" Width x 3/4" Thickness

Material Neoprene

Capacity 120 Pound at 40 Durometer

Pads Can be Used to Reduce Noise, High Frequency Vibration and Impact from Typical Machine

Natural Rubber for Maximum Resilience and Vibration Isolation

Contains Anti-Oxidants to Improve Aging

Mason Industries R18X18SW

Diversitech Adjustable Equipment Riser 8"

Diversitech AER-8

RectorSeal Slab Stand

31-3/4" L x 15" W x 12-1/2" H Steel



CNG

The EcoPad is a black plastic pad designed as a mounting base for condenser equipment. It is made with 98% recycled, UV inhibited material resulting in an environmentally friendly, weather resistant equipment pad. EcoPad is injection molded from polypropylene, creating a pad that is lightweight, but durable. It is constructed with generous ribbing for optimum strength and self leveling ground support.

Diversitech EP1838-3