Brand Name
Type
Material
Application
Length
|◀ ◀ 385 - 396 of 444 ▶ ▶|
View:

Superstrut Kindorf Pipe Clamp 5/8" Easy Installation 701 Straps are Preassembled for Easy Handling and Sorting

ABB Installation Products Superstrut Kindorf Chrome-Plated 14 Gauge Steel Pipe Clamp 750 lb Load
  • Bolt head is combination slot and hex head for flexibility of attachment
  • Square nut is captivated on the shoulder for easy 1-handed tightening
  • Straps are interchangeable with 1-1/2" strut, for broader application
  • Straps are shipped assembled so counting and sorting are easier
  • Pipe and conduit sizes are shown on the strap for easy identification

    ABB Installation Products 701-58

    • Item#:
    701-58
    Manufacturer Item:
    701-5/8
    Manufacturer:
    ABB INSTALLATION PRODUCTS INC
     
    ABB-Superstrut_Broc

    Superstrut Kindorf Pipe Clamp 7/8" Easy Installation 701 Straps are Preassembled for Easy Handling and Sorting

    ABB Installation Products Superstrut Kindorf Chrome-Plated 14 Gauge Steel Pipe Clamp 750 lb Load
  • Bolt head is combination slot and hex head for flexibility of attachment
  • Square nut is captivated on the shoulder for easy 1-handed tightening
  • Straps are interchangeable with 1-1/2" strut, for broader application
  • Straps are shipped assembled so counting and sorting are easier
  • Pipe and conduit sizes are shown on the strap for easy identification

    ABB Installation Products 701-78

    • Item#:
    701-78
    Manufacturer Item:
    701-7/8
    Manufacturer:
    ABB INSTALLATION PRODUCTS INC
     
    ABB-Superstrut_Broc

    Superstrut Kindorf Pipe Clamp 1/4" Easy Installation 701 Straps are Preassembled for Easy Handling and Sorting

    ABB Installation Products Superstrut Kindorf Chrome-Plated 14 Gauge Steel Pipe Clamp 750 lb Load
  • Bolt head is combination slot and hex head for flexibility of attachment
  • Square nut is captivated on the shoulder for easy 1-handed tightening
  • Straps are interchangeable with 1-1/2" strut, for broader application
  • Straps are shipped assembled so counting and sorting are easier
  • Pipe and conduit sizes are shown on the strap for easy identification

    ABB Installation Products 701-14

    • Item#:
    701-14
    Manufacturer Item:
    701-1/4
    Manufacturer:
    ABB INSTALLATION PRODUCTS INC
     
    ABB-Superstrut_Broc

    Superstrut Kindorf Pipe Clamp 1/2" Easy Installation 701 Straps are Preassembled for Easy Handling and Sorting

    ABB Installation Products Superstrut Kindorf Chrome-Plated 14 Gauge Steel Pipe Clamp 750 lb Load
  • Bolt head is combination slot and hex head for flexibility of attachment
  • Square nut is captivated on the shoulder for easy 1-handed tightening
  • Straps are interchangeable with 1-1/2" strut, for broader application
  • Straps are shipped assembled so counting and sorting are easier
  • Pipe and conduit sizes are shown on the strap for easy identification

    ABB Installation Products 701-1/2-STR

    • Item#:
    701-1/2-STR
    Manufacturer Item:
    701-1/2-STR
    Manufacturer:
    ABB INSTALLATION PRODUCTS INC
     
    ABB-Superstrut_Broc

    Superstrut Kindorf Pipe Clamp 3/4" Easy Installation 701 Straps are Preassembled for Easy Handling and Sorting

    ABB Installation Products Superstrut Kindorf Chrome-Plated 14 Gauge Steel Pipe Clamp 750 lb Load
  • Bolt head is combination slot and hex head for flexibility of attachment
  • Square nut is captivated on the shoulder for easy 1-handed tightening
  • Straps are interchangeable with 1-1/2" strut, for broader application
  • Straps are shipped assembled so counting and sorting are easier
  • Pipe and conduit sizes are shown on the strap for easy identification

    ABB Installation Products 701-34

    • Item#:
    701-34
    Manufacturer Item:
    701-3/4
    Manufacturer:
    ABB INSTALLATION PRODUCTS INC
     
    ABB-Superstrut_Broc

    Insulated Strut Mount Clamp 7/8" x 1/2" Wall Zinc Plated, Includes Clamps & Fastener

    Klo-Shure Zinc Dichromate Mild Steel Clamp Insulated Strut Mount Coupling, 7/8" Tube
    The patented Klo-Shure Insulation Couplings and Insulation Hangers support and secure copper tubes independent of the insulation. The insulation is then inserted into the insulation coupling to provide a superior vapor barrier to other methods. The weight of the secured member will not crush or tear the insulation over time.,
    ,

    Hydra-Zorb 724087

    Item#:
    724087
    Manufacturer Item:
    724087
    Manufacturer:
    HYDRA-ZORB COMPANY
     
    Hydra-Zorb-Series-7-Broc

    Bassett Brackett 12"-19" Self Nailing

    C&S Manufacturing Corporation was founded over 60 years ago in May of 1962 by John D. Collins who worked many previous years as a Heating Contractor in the family heating business. After obtaining a patent on his unique Basset Bracket the company was dedicated to the manufacturing and selling of time and labor-saving products initially for the HVAC industry.
    As business grew and new labor-saving ideas were developed, the company expanded into the plumbing industry with similar labor saving and code required products. The Basset Product Line of C&S Manufacturing is well known in these industries and is now stocked by over 2,500 Plumbing and HVAC wholesalers throughout the country. Basset Products are known for their quality. C&S Manufacturing is committed to the On Time shipment of products through the wholesale distribution channel to be available to the contractor when needed
    ,

    C&S Manufacturing A-1 BRACKETS

    Item#:
    A-1 BRACKETS
    Manufacturer Item:
    A-125
    Manufacturer:
    C & S MANUFACTURING CORP.
     
    C&SMAN_Spec

    Basset Duct Hanger 8"

    C&S Manufacturing Basset BH-8 18 ga Galvanized Steel Square Duct Hanger, 8" L

    C&S Manufacturing BH-8EA

    Item#:
    BH-8EA
    Manufacturer Item:
    BH-8
    Manufacturer:
    SMOKE PIPE & SHEET METAL
     
    C&SMAN_Spec

    Cushion Clamp 3/4" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX3410

    • Item#:
    UX3410
    Manufacturer Item:
    UX3410
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3410_Broc

    Cushion Clamp 3/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX3810

    • Item#:
    UX3810
    Manufacturer Item:
    UX3810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3810_Broc

    Cushion Clamp 5/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX5810

    • Item#:
    UX5810
    Manufacturer Item:
    UX5810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX5810_Broc

    Cushion Clamp 1/2" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX1210

    • Item#:
    UX1210
    Manufacturer Item:
    UX1210
    Manufacturer:
    MILWAUKEE ELECTRIC TOOL CORP.
     
    UX1210_Broc
    |◀ ◀ 385 - 396 of 444 ▶ ▶|
    View: