Brand Name
Type
Material
Application
Length
|◀ 217 - 228 of 419 ▶|
View:
Midsun Specialty Products Black Perfect Pitch Starter Kit
,
,

Midsun Specialty Products PPK-STARTER-BLACK

Item#:
PPK-STARTER-BLACK
Manufacturer Item:
PPK-STARTER-BLACK
Manufacturer:
MIDSUN SPECIALTY PRODUCTS INC.
ABB Installation Products Kindorf RA-225-10 Gold 14 ga Steel Slotted Right Angle Channel, 10 feet L x 1-5/8" W x 2-3/8" D
  • Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces
  • Designed for light-duty applications where extra strength is not a requirement
  • Right angle slotted metal framing
,
,

ABB Installation Products RA225-10

Item#:
RA225-10
Manufacturer Item:
RA-225-10
Manufacturer:
ABB INSTALLATION PRODUCTS INC
Duro Dyne TR38x6FT Threaded Rod 3/8" x 6' (Zinc Plated)
Zinc Plated 3/8"Threaded Rod 6ft. Hanging ductwork, equipment, wiring trays or other building components requires secure structural assemblies. These assemblies are comprised of support members attached to building anchor points with fasteners. The support members are often lengths of strut or angle iron. The fastener frequently is threaded rod combined with washers and nuts. Duro Dyne stocks Zinc plated threaded rod in five diameters and in lengths of 6 feet, 10 feet and 12 feet. The rod is shipped in sturdy cardboard tubes.
  • Zinc plated
  • Low carbon steel meeting the minimum requirements of ASTM A307, grade A
  • 60,000 PSI Tensile Strength
  • 16 threads per"
,
,

Duro Dyne TR38X6FT

Item#:
TR38X6FT
Manufacturer Item:
TR38ZP06
Manufacturer:
DURO DYNE NATIONAL CORPORATION
C&S Manufacturing Basset TPC-1P-5 Plastic 2-Hole Pipe Clamp, 1/2"

C&S Manufacturing TPC1P5

Item#:
TPC1P5
Manufacturer Item:
TPC-1P-5
Manufacturer:
SMOKE PIPE & SHEET METAL
Ultiworks TR14X10FT Threaded Rod 1/4" x 10'

Ultiworks TR14X10FT

Item#:
TR14X10FT
Manufacturer Item:
25C12000RAT2Z
Manufacturer:
ULTIWORKS LLC
Edwards & West TR38X10FT Threaded Rod 3/8" x 6',
,

Edwards & West TR38X10FT

Item#:
TR38X10FT
Manufacturer Item:
37C12000RAT2Z
Manufacturer:
EDWARDS & WEST,INC T/A DIVSPEC
Edwards & West TR38X3 Threaded Rod 3/8" x 3',
,

Edwards & West TR38X3

Item#:
TR38X3
Manufacturer Item:
904-3
Manufacturer:
EDWARDS & WEST,INC T/A DIVSPEC
Edwards & West TR12X6FT Threaded Rod 1/2" x 6',
,

Edwards & West TR12X6FT

Item#:
TR12X6FT
Manufacturer Item:
045017
Manufacturer:
EDWARDS & WEST,INC T/A DIVSPEC
  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX21834

  • Item#:
    UX21834
    Manufacturer Item:
    UX21834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
    Warwick Hanger 100-10 Copper Plating Carbon Steel 2-Hole Tubing Clip, 1"
    • Our copper plated tubing clips are designed to snap onto the tubing for hands free nailing
    ,
    ,

    Warwick Hanger W100-10

    Item#:
    W100-10
    Manufacturer Item:
    100-10
    Manufacturer:
    WARWICK HANGER COMPANY
    Sunrise Electric Supply 0B Silver Zinc-Plated Low Carbon Cold Rolled Steel 3-Hole

    Sunrise Electric 0-B

    Item#:
    0-B
    Manufacturer Item:
    0-B
    Manufacturer:
    ELECTRICAL PARTS & FITTINGS
    Anvil International 0500301734 Adjustable Swivel Ring Hanger 1-1/4"
    Material: Carbon steel
  • Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
  • Service: Recommended for suspension of non-insulated stationary pipe line.
  • Maximum Temperature: 650° F
  • Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
  • ANSI/MSS SP-69 and MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3 4" - 8"). Features:
  • Threads are countersunk so that they cannot become burred or damaged.
  • Knurled swivel nut provides vertical adjustment after piping is in place.
  • Captured swivel nut in the 12" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out.,
    ,

    Anvil 0500301734

  • Item#:
    0500301734
    Manufacturer Item:
    0500301734
    Manufacturer:
    ANVIL INTERNATIONAL LP
    |◀ 217 - 228 of 419 ▶|
    View: