Brand Name
Type
Length
Width
Thickness
Color
|◀ ◀ 49 - 60 of 70 ▶ ▶|
View:

K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 1" An innovative solution to insulating pipe bends and intersection

K-Flex 801LRE100138 K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 1"



K-Flex 801LRE100118

Item#:
801LRE100138
Manufacturer Item:
801-LRE-100138
Manufacturer:
K-FLEX USA LLC
 
K-Flex_Broc

K-Flex Black Long Radius 90 Degree Elbow Cover 1-1/8" x 1" An innovative solution to insulating pipe bends and intersection

K-Flex 801LRE100118 K-Flex Black Long Radius 90 Degree Elbow Cover 1-1/8" x 1"



K-Flex 801-LRE-068138

Item#:
801LRE100118
Manufacturer Item:
801-LRE-100118
Manufacturer:
K-FLEX USA LLC
 
K-Flex_Broc

K-Flex Black Long Radius 90 Degree Elbow Cover 5/8" x 1/2' An innovative solution to insulating pipe bends and intersection

K-Flex 801LRE048058 K-Flex Black Long Radius 90 Degree Elbow Cover 5/8" x 1/2' K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, Flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,



K-Flex 801LRE048058

Item#:
801LRE048058
Manufacturer Item:
801-LRE-048058
Manufacturer:
INSULTUBE
 
K-Flex_Broc

K-Flex Black Long Radius 90 Degree Elbow Cover 1/2" x 1/2" An innovative solution to insulating pipe bends and intersection

K-Flex 801LRE048048 K-Flex Long Radius 90 Degree Elbow Cover 1/2" x 1/2" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, Flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,



Armacell APF21810EL3W

Item#:
801LRE048048
Manufacturer Item:
801-LRE-048048
Manufacturer:
INSULTUBE
 
K-Flex_Broc
K-Flex_Broc(1)

K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 1-1/2" An innovative solution to insulating pipe bends and intersection

K-Flex 801LRE148138 K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 1-1/2" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, Flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,



K-Flex 801LRE148078

Item#:
801LRE148138
Manufacturer Item:
801-LRE-148138
Manufacturer:
INSULTUBE
 
K-Flex_Broc

K-Flex Black Long Radius 90 Degree Elbow Cover 3-1/8" x 1" An innovative solution to insulating pipe bends and intersection

K-Flex 801LRE100318 K-Flex Black Long Radius 90 Degree Elbow Cover 3-1/8" x 1" An innovative,
,



K-Flex 801LRE100258

Item#:
801LRE100318
Manufacturer Item:
801-LRE-100318
Manufacturer:
K-FLEX USA LLC
 
K-Flex_Broc

K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 3/4" An innovative solution to insulating pipe bends and intersection

K-Flex 801-LRE-068138 K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 3/4"



K-Flex 801P100058

Item#:
801-LRE-068138
Manufacturer Item:
801-LRE-068138
Manufacturer:
K-FLEX USA LLC
 
K-Flex_Broc

K-Flex Black Long Radius 90 Degree Elbow Cover 3/4" X 3/4" An innovative solution to insulating pipe bends and intersection

K-Flex 801LRE068038 Black Long Radius 90 Degree Elbow Cover 3/4" X 3/4"



K-Flex 801LRE068048

Item#:
801LRE068048
Manufacturer Item:
801-LRE-068048
Manufacturer:
K-FLEX USA LLC
 
K-Flex_Broc

Cushion Clamp 3/4" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    ZSI Foster CBN1S

    • Item#:
    UX3410
    Manufacturer Item:
    UX3410
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3410_Broc

    Cushion Clamp 3/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    ZSI Foster UX3410

    • Item#:
    UX3810
    Manufacturer Item:
    UX3810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3810_Broc

    Cushion Clamp 5/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    ZSI Foster UX21834

    • Item#:
    UX5810
    Manufacturer Item:
    UX5810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX5810_Broc

    Cushion Clamp 1/2" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    ZSI Foster UX11810

    • Item#:
    UX1210
    Manufacturer Item:
    UX1210
    Manufacturer:
    MILWAUKEE ELECTRIC TOOL CORP.
     
    UX1210_Broc
    |◀ ◀ 49 - 60 of 70 ▶ ▶|
    View: