Webstone Valve Pro Pal Series 50674W Lead Free Forged Brass T-Drain Valve, 1", C x C

Full port forged brass fitting with high-flow hose drain
• Install anywhere a branch hose line is required
• High-flow alternative for filling closed-loop hydronic systems
• Eliminate assemblies needed for installing drains/draw offs into a line
• u2 in 1 alternative replaces a tee fitting and purge drain
• Blow-out proof stem
• Adjustable packing gland
• Brass end cap, enamel coated aluminum handle, brass handle screw, brass with EPDM strap cap and strap, EPDM washer
  
  

  50674W

Webstone Valve Pro Pal Series 50673W Lead Free Forged Brass T-Drain Valve, 3/4", C x C

Full port forged brass fitting with high-flow hose drain
• Install anywhere a branch hose line is required
• High-flow alternative for filling closed-loop hydronic systems
• Eliminate assemblies needed for installing drains/draw offs into a line
• u2 in 1 alternative replaces a tee fitting and purge drain
• Blow-out proof stem
• Adjustable packing gland
• Brass end cap, enamel coated aluminum handle, brass handle screw, brass with EPDM strap cap and strap, EPDM washer
  Webstone Valve 50673W
  
  

  Webstone Valve 50673W

The model A anti-syphon valve reduces fire hazards and prevents oil spills caused by oil being siphoned from the storage tank onto the boiler room floor. The valve automatically shuts off the oil flow in the event of a broken or inadvertently left open oil suction line as required by NFPA 30 Flammable and Combustible Liquids Code. This protection is required by many codes and is recommended on all installations where the highest level of oil in storage is above the boiler room floor.

The assembly consists of a heavy bronze body with oil proof gasketing, spring-loaded poppet, composition seat and dasHPot
• Tight shut-off is assured by the resilient seat material
• Smooth, quiet operation is provided by the dasHPot
• Suction lines may be tested for tightness under reasonable pressure without damage to the seat
• The anti-syphon valve is installed in a vertical position at the highest point in the suction line with no part of the line between the valve and the tank below the maximum oil storage level
  
  

  Preferred Utilities 503-7

These valves have revolutionized the installation of circulator pumps. Our original Isolator unit-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout-proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or overheat valves when soldering
• Brass end cap, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts

Sid Harvey Item #:50404: Replaces Part #:'s : R55-633,

Webstone Valve 50404

These valves have revolutionized the installation of circulator pumps. Our original Isolator unit-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout-proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or overheat valves when soldering
• Brass end cap, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts

Sid Harvey Item #:50405: Replaces Part #:'s : R55-634,

Webstone Valve 50405

These valves have revolutionized the installation of circulator pumps. Our original Isolator unit-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout-proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or overheat valves when soldering
• Brass end cap, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts

Sid Harvey Item #:50403: Replaces Part #:'s : R55-632,

50403

These valves have revolutionized the installation of circulator pumps. Our original Isolator unit-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout-proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or overheat valves when soldering
• Patented technology
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing Gallonnd and drain handle screw, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts, PTFE drain seat and drain stem seal, enamel coated aluminum drain handle, EPDM washer, Brass cap with EPDM strap

Sid Harvey Item #:50415: Replaces Part #:'s : R55-644,

50415

Webstone Valve The Isolator 50416 Forged Brass Lever Handle Full Port Uni-Flange Ball Valve with Drain, 1-1/2", Sweat x Flange

With high flow hose drain
• Bonus wing style T-handle, nuts and bolts
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing gland and drain handle screw, stainless steel handle nut, vinyl jacket, zinc plated steel flange bolt and nuts, PTFE drain seat and stem seal, HCP brass drain ball, enamel coated aluminum drain handle, EPDM washer, brass cap with EPDM strap, CP steel wing handle
• Actuated by a blow-out proof stem and adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or over heat valves when soldering

Sid Harvey Item #:50416: Replaces Part #:'s : R55-645,

50416

These valves have revolutionized the installation of circulator pumps. Our original Isolator unit-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout-proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or overheat valves when soldering
• Patented technology
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing Gallonnd and drain handle screw, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts, PTFE drain seat and drain stem seal, enamel coated aluminum drain handle, EPDM washer, Brass cap with EPDM strap

Sid Harvey Item #:50413: Replaces Part #:'s : R55-642,

50413

These valves have revolutionized the installation of circulator pumps. Our original Isolator unit-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout-proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or overheat valves when soldering
• Patented technology
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing Gallonnd and drain handle screw, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts, PTFE drain seat and drain stem seal, enamel coated aluminum drain handle, EPDM washer, Brass cap with EPDM strap

Sid Harvey Item #:50414: Replaces Part #:'s : R55-643,

Webstone Valve 50414

These valves have revolutionized the installation of circulator pumps. Our original Isolator unit-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

With detachable rotating flange
• With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or over heat valves when soldering
• Patented technology
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing gland and drain handle screw, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts, PTFE drain seat and drain stem seal, enamel coated aluminum drain handle, EPDM washer, brass cap with EPDM strap
  
  

  Webstone Valve 51403

Webstone Valve Pro-Connect ProPush Clean Brass 6270 Lead Free Ball Valve Designed for residential, commercial or industrial use with water, specifically for use in copper, PEX, and CPVC systems. This valve features a fully removable/replaceable grip assembly, ideal for use in potable water and hydronic heating systems. This approved Webstone valve is actuated by a blowout proof stem and features an adjustable packing gland.,

62702W