S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
Glassfloss 26X28X2PL
Trion Air Bear 255649-101 Synthetic Fiber MERV 8 High Performance Replacement Media Filter, 16 x 25 x 3"
- Mechanical MERV 8 filter maintains efficiency under all operating conditions
- Finger supported vertical pleats remain evenly spaced while maximizing dirt holding capacity at the lowest pressure drop
- 100% electro-statically charged synthetic fibers, along with radial pleating, to provide minimum resistance and higher dirt holding capacity to maximize filter life
- Suitable for use with all types of forced-air configurations
- Factory installed, double gasket, top and bottom, eliminates filter bypass
- Galvanized rust resistant wire mesh, integral width filter media, supports media and retains pleat shape even when dirty
- Moisture resistant frame retains strength and shape even in high humidity
Trion 255649-101
Item#:
255649-101
Manufacturer Item:
255649-101
Manufacturer:
FEDDERS NORTH AMERICA
The Hi-E 40 is a medium efficiency pleated filter, available in 2" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 8 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy-duty beverage board frame moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
Purolator 28X30X4-PL
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
28-1/2X29-1/2X2PL
Item#:
28-1/2X29-1/2X2PL
Manufacturer Item:
28-1/2X29-1/2X2PL
Manufacturer:
GLASFLOSS INDUSTRIES INC.
Purolator FME40 Standard Capacity Pleated Air Filter, 25 x 25 x 2"
- Medium efficiency
- Excellent pre-filter or stand-alone filter
25X25X2 P
Item#:
25X25X2 P
Manufacturer Item:
FME40-25X25X2
Manufacturer:
AIR FILTERS
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
Purolator 25X25X1P
Flanders Precisionaire EZ Fiberglass MERV 4 Standard Grade Disposable Panel Air Filter, 25" x 30" x 1"
- Designed for protection of furnace and central air units in residential and light commercial applications
- EZ Flow II has no media retainer
- The frame is made from heavy chipboard in a 1-piece design that eliminates corner separation
- The filtering media is continuous filament spun glass
- A resinous bonding agent provides rigidity and resistance to media compression
- EZ Flow II is made to function without a retainer, by adhering the frame directly to the media which has a light skin to make it self-retaining
- Sealing is accomplished with a resilient hot-melt adhesive running the full perimeter of the frame on both upstream and downstream sides
Flanders Precisionaire 25X30X1
AprilAire, our mission has always been to make homes healthy through intuitive design and professional-grade solutions
because healthy homes are the foundation for healthy people, families, and communities.
Healthy Living Everyone deserves to breathe Healthy Airno matter where you live or what your circumstances are
Simplicity by Design
Our Healthy Air solutions are designed to be intuitive, easy to use, and environmentally friendly.
Making a Difference
Our work is fueled by a passion for making a Healthy Air difference.
We're committed to delivering real results through dedication to our customers and solutions that perform.
Aprilaire 275 MERV 13 High Efficiency Pleated Replacement Media Filter, 16 x 25 x 4 x"
Aprilaire 275AA
Item#:
275AA
Manufacturer Item:
275AA
Manufacturer:
APRILAIRE
Scan Air Filter Pleated Air Filter
- 30 x 36 x 2"
- There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
- What is MERV?
- MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
Glasfloss 30X36X2PL
How often do I need to change my air filter?
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
30X36X1
The F312 disposable panel filters are designed to withstand the demands of tough industrial and commercial applications. Purolator assures filter durability by utilizing construction features not found in traditional designs.
- Frame is produced using post-consumer recycled materials
- Safe, fast and easy installation
- The unique monobond p" frame concept involves a 1-piece frame sealed to the media under heat and pressure
- To enhance filtration capability and prevent migration of finer particles, the filter media has a skin backing and is evenly coated with a gelled adhesive
- Improved aerodynamics reduce restriction to air flow
- Filters are manufactured with superior grade fiberglass media to guarantee full depth loading and high dust holding capacity
- Larger effective filtering surface area
- Made in USA
Purolator 30X30X1
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
Glassfloss 30X30X2
Item#:
30X30X2
Manufacturer Item:
GTASP30302
Manufacturer:
GLASFLOSS INDUSTRIES INC.