Taco Freedom Flange 110-252F Cast Iron Circulator Flange, 1", NPT

• At last, freedom from scraped knuckles and jury-rigged tools, Taco's flanges give you lots of ways to make quick work of your installation
• Easy-on, easy-off with a common adjustable wrench
• 3-1/8" hole centre to centre

Sid Harvey Item #:B63-1: Replaces Part #:'s : B53-129 | B63-11 |,

Taco B63-1

,

B63-1

Bell & Gossett P80816 Cellulose Front Bearing Gasket for CentrifuGallon Pumps

Sid Harvey Item #:P80816: Replaces Part #:'s : 41276,

Bell & Gossett P80816

,

P80816

Grundfos 530244 Gasket 1-1/2" Flange GF 40/43 Series Pumps,

530244

,

530244

Taco 006-047RP IFC Replacement Kit for 003, 005, 006 and 00R Circulating Pumps

,

Taco 006-047RP

,

006-047RP

Sid Harvey P9-11 Impeller Kit for use with P9-10 Pump

,

Sid Harvey P9-11

,

P9-11

Bell & Gossett 101226

The isolation flange is a combination of an isolation ball valve and a companion flange for circulators. The isolation flange allows easy service or replacement of the circulator without the need to drain the system. The isolation flange fits the Bell & Gossett NRF/NBF/SSF wet rotors, series PL, series 100, HV, PR and LR circulators.

,

101226

,

101226

These valves have revolutionized the installation of circulator pumps. Our original Isolator uni-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

• With detachable rotating flange
• With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or over heat valves when soldering
• Patented technology
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing gland and drain handle screw, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts, PTFE drain seat and drain stem seal, enamel coated aluminum drain handle, EPDM washer, brass cap with EPDM strap

51404

These valves have revolutionized the installation of circulator pumps. Our original Isolator uni-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

• With detachable rotating flange
• With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or over heat valves when soldering
• Patented technology
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing gland and drain handle screw, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts, PTFE drain seat and drain stem seal, enamel coated aluminum drain handle, EPDM washer, brass cap with EPDM strap

51414

Designed for residential, commercial or industrial use with water or a glycol mixture. This approved Webstone valve is actuated by a blowout proof stem and features an adjustable packing gland. Flange features a conical inlet to minimize turbulence. The rotating flange is secured by a snug-fit snap-ring that provides greater control over positioning during installation. Multi-directional main valve allows for draining from either side of the pump. Threaded ends comply with ANSI B1.20.1.

• Full port forged brass uni-flange ball valve with detachable rotating flange, multi-function hi-flow hose drain adjustable packing gland, nuts and bolts
• The features and benefits you trust in our original Isolator line with two versatile enhancements
• First, 360 deg flange rotation that allows for rotation to any degree necessary for your installation
• Second, a multifunction drain that makes the isolator the only valve that drains from both sides of the pump
• Unique uni-body design is preserved
• Solid forged brass outer flange
• Fully removable outer flange secured by snap ring
• Prevents electrolysis
• Eliminates galvanic corrosion
• 3-way ball purges before or after the pump
• Guaranteed for life
• Replaces 8 components
• Eliminate 7 leak paths
• Save 63 min of labor
• Compatible with popular press tools
• 360 deg rotation offers greater flexibility
• Snap ring provides greater control over installation
• Inner and outer flanges are designed to help prevent problems from over-torquing
• Twice the purging capabilities in a single component

,

41414

,

41414

These valves have revolutionized the installation of circulator pumps. Our original Isolator uni-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

• With detachable rotating flange
• With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or over heat valves when soldering
• Patented technology
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing gland and drain handle screw, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts, PTFE drain seat and drain stem seal, enamel coated aluminum drain handle, EPDM washer, brass cap with EPDM strap

Webstone Valve 41404

These valves have revolutionized the installation of circulator pumps. Our original Isolator uni-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

• With detachable rotating flange
• With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or over heat valves when soldering
• Patented technology
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing gland and drain handle screw, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts, PTFE drain seat and drain stem seal, enamel coated aluminum drain handle, EPDM washer, brass cap with EPDM strap

51413

These valves have revolutionized the installation of circulator pumps. Our original Isolator uni-flange ball valve design has evolved into the largest flanged ball valve program in the industry today. No matter what your installation requires, there is an Isolator to meet your needs.

• With detachable rotating flange
• With adjustable packing gland nut and bolt
• Saves labor, saves space and reduces leak paths
• Prevents electrolysis
• Eliminates galvanic corrosion
• Allows virtually no air into system upon pump replacement
• Slotted holes for high velocity pumps
• Guaranteed for life
• Designed for residential, commercial or industrial use with water or a glycol mixture
• Valve is actuated by a blowout proof stem and features an adjustable packing gland
• Flange features a conical inlet to minimize turbulence
• Other solder materials have lower pressure/temperature limits
• Do not silver braze or over heat valves when soldering
• Patented technology
• Brass end cap, seat retainer, drain end cap, drain stem, drain packing gland and drain handle screw, stainless steel handle nut, vinyl handle jacket, steel zinc plated flange bolts and nuts, PTFE drain seat and drain stem seal, enamel coated aluminum drain handle, EPDM washer, brass cap with EPDM strap

Webstone Valve 41413