S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
General Size Guidelines per household size shown below.
Add 3-1/2 gallon tank capacity for each additional bathroom
In the home. If there is an automatic dishwasher add
5 gallons to the water heater capacity.
1-2 people: 2-3 people: 3-4 people: 5+ people:
30-40 gallons 40-50 gallons 50-60 gallons 60-80+ gallons
Rheem Professional Classic PROG40S-36N RH67 PV Lead Free Power Vent Residential Short Natural Gas Water Heater, 40 Gallon, 120 VAC, 36000 BTU
,
- Electronic gas control for improved monitoring and service
- Eco-friendly burner, low NOx design
- Uses indoor air for combustion, blower exhausts the flue gases
- New whisper quiet blower
- Guardian System and sensor - exclusive air/fuel shut-off device
- Maintenance free - no filter to clean
- Protective control system that disables the heater in the presence of flammable vapor accumulation
- Long venting lengths up to 100 equivalent feet
- Premium grade anode rod provides long-lasting tank protection
- Enhanced flow brass drain valve
- Temperature and pressure relief valve included
- EverKleen patented system fights sediment build-up
- Durable silicon nitride igniter (HSI)
- 6 years limited tank and parts warranty
,
Rheem Water Heaters PROG40S-36NRH67PV
Rheem Water Heaters PROG40S-36NRH67PV
Item#:
PROG40S-36NRH67PV
Manufacturer Item:
PROG40S-36N RH67 PV
Manufacturer:
RHEEM SALES COMPANY, INC.
Heat-flo offers quality indirect water heating systems that provide abundant hot water, low operating cost and long life. Hot water from any heating boiler is circulated through the coil inside to heat all the water in the tank. Simply add another zone to your existing heating boiler.
,
- Large, smooth-wall coils deliver full output for years
- No finned tubing to collect lime and sediment
- Includes over 2" of insulation and a flexible thermoplastic jacket that will not dent or corrode, and less than 10 per hr heat loss
- All connections are on top on the standard units for a neat, clean installation
- Brass drain and relief valves are factory installed
- Standard Honeywell control and well for reliability and easy service
- Low operating cost
,
Heat-Flo Water Heaters HF-40
Heat-Flo Water Heaters HF-40
Item#:
HF-40
Manufacturer Item:
HF40
Manufacturer:
HEAT-FLO, LLC
Rheem Professional Classic PROG40S-35P RH62 Lead Free Residential Short Atmospheric LP Water Heater, 40 Gallon, 35000 BTU
- Guardian System and sensor - exclusive air/fuel shut-off device
- Maintenance free - no filter to clean
- Protective control system that disables the heater in the presence of flammable vapour accumulation
- Eco-friendly burner, low NOx design
- Premium grade anode rod provides long-lasting tank protection
- Easy to light
- EverKleen patented system fights sediment build-up
- Enhanced flow brass drain valve
- Temperature and pressure relief valve included
Item#:
PROG40S-35PRH62
Manufacturer Item:
PROG40S-35P RH62
Manufacturer:
RHEEM SALES COMPANY, INC.
Rheem Professional Classic PROG40S-34N RH62 Lead Free Atmospheric Vent Residential Short Natural Gas Water Heater, 40 Gallon, 34000 BTU
,
- Guardian System and sensor - exclusive air/fuel shut-off device
- Maintenance free - no filter to clean
- Protective control system that disables the heater in the presence of flammable vapor accumulation
- Eco-friendly burner, low NOx design
- Premium grade anode rod provides long-lasting tank protection
- Easy to light - no matches required
- EverKleen patented system fights sediment build-up
- Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
- Enhanced flow brass drain valve
- Temperature and pressure relief valve included
- More hot water at a low operating cost
- 6 years limited tank and parts warranty
,
Rheem Water Heaters PROG40S-34NRH62
Rheem Water Heaters PROG40S-34NRH62
Item#:
PROG40S-34NRH62
Manufacturer Item:
PROG40S-34N RH62
Manufacturer:
RHEEM SALES COMPANY, INC.
Diversified Heat Transfer TX-80 Indirect Water Heater 80 Gallon Stainless Steel
PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.
REDUCED ENERGY COST
The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.
REDUCED MAINTENANCE COST
Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.
PATENTED AND ENVIRONMENTALLY FRIENDLY
All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.
LEADING WELDING TECHNOLOGY
The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,
,
PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.
REDUCED ENERGY COST
The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.
REDUCED MAINTENANCE COST
Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.
PATENTED AND ENVIRONMENTALLY FRIENDLY
All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.
LEADING WELDING TECHNOLOGY
The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,
,
Diversified Heat Transfer TX-80
Diversified Heat Transfer TX-80
Rheem Professional Classic PROG40S-32P RH67 PV Lead Free Residential Short Power Vent LP Water Heater, 40 Gallon, 120 VAC, 32000 BTU
,
- Electronic gas control for improved monitoring> and service
- Eco-friendly burner, low NOx design
- Uses indoor air for combustion; blower exhausts the flue gases
- New whisper quiet blower
- Guardian System and sensor - exclusive air/fuel shut-off device
- Maintenance free - no filter to clean
- Disables the heater in the presence of flammable vapour accumulation
- Long venting lengths up to 100 feet equivalent
- Vertical or horizontal termination
- Rheem exclusive R-Tech (resistored) anode rod provides long-lasting tank protection
- Enhanced flow brass drain valve
- Temperature and pressure relief valve included
- EverKleen patented system fights sediment build-up
- 6 years limited tank and component parts warranty
,
Rheem Water Heaters PROG40S32PRH67PV
Rheem Water Heaters PROG40S32PRH67PV
Item#:
PROG40S32PRH67PV
Manufacturer Item:
PROG40S-32P RH67 PV
Manufacturer:
RHEEM SALES COMPANY, INC.
Diversified Heat Transfer TX-50 Indirect Water Heater 50Gallon Stainless Steel
PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.
REDUCED ENERGY COST
The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.
REDUCED MAINTENANCE COST
Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.
PATENTED AND ENVIRONMENTALLY FRIENDLY
All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.
LEADING WELDING TECHNOLOGY
The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,
,
PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.
REDUCED ENERGY COST
The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.
REDUCED MAINTENANCE COST
Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.
PATENTED AND ENVIRONMENTALLY FRIENDLY
All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.
LEADING WELDING TECHNOLOGY
The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,
,
diversified heat transfer tx-50
diversified heat transfer tx-50
Rheem Professional Classic PROG40-40N RH67 PV Lead Free Power Vent Residential Tall Natural Gas Water Heater, 40 Gallon, 120 VAC, 40000 BTU
,
- Electronic gas control for improved monitoring and service
- Eco-friendly burner, low NOx design
- Uses indoor air for combustion, blower exhausts the flue gases
- New whisper quiet blower
- Guardian System and sensor - exclusive air/fuel shut-off device
- Maintenance free - no filter to clean
- Protective control system that disables the heater in the presence of flammable vapor accumulation
- Long venting lengths up to 100 equivalent feet
- Premium grade anode rod provides long-lasting tank protection
- Enhanced flow brass drain valve
- Temperature and pressure relief valve included
- EverKleen patented system fights sediment build-up
- Durable silicon nitride igniter (HSI)
- 6 years limited tank and parts warranty
,
Rheem Water Heaters PROG40-40NRH67PV
Rheem Water Heaters PROG40-40NRH67PV
Item#:
PROG40-40NRH67PV
Manufacturer Item:
PROG40-40N RH67 PV
Manufacturer:
RHEEM SALES COMPANY, INC.
Diversified Heat Transfer TX-40 Indirect Water Heater 42Gallon Stainless Steel
PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.
REDUCED ENERGY COST
The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.
REDUCED MAINTENANCE COST
Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.
PATENTED AND ENVIRONMENTALLY FRIENDLY
All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.
LEADING WELDING TECHNOLOGY
The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,
,
PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.
REDUCED ENERGY COST
The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.
REDUCED MAINTENANCE COST
Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.
PATENTED AND ENVIRONMENTALLY FRIENDLY
All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.
LEADING WELDING TECHNOLOGY
The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,
,
diversified heat transfer tx-40
diversified heat transfer tx-40
Diversified Heat Transfer Techtanium TT-40 Powder Coat Painted Steel Jacket Indirect Water Heater, 40 Gallon, 10 gpm, 120000 BTU
,
- Extra large heat exchanger surface area - high recovery and continuous flow for abundant hot water
- Titanium glass lined - high elasticity that adapts to expansion and contraction for added strength and durability, provides a resistant layer of protection against corrosion
- Exterior steel jacket with powder coat paint - durable and solid for life lasting exterior appearance, polyurethane foam (PUF) insulation reduces standby heat loss
- Side connections for TT series
- Works with any hydronic heat source for domestic hot water
- Environmentally friendly polyurethane insulation limits heat loss and is both CFC and HFC- free
- Polyurethane foam for outstanding insulation and reduced power consumption- CFC free
- All models supplied magnesium anti-corrosion anodes
- TT models - (2) magnesium anti-corrosion anodes
- Environmentally and Installer friendly
- Includes - Honeywell L4006A aquastat, immersion well
- 7 years residential, 3 years commercial warranty
,
diversified heat transfer tt-40
diversified heat transfer tt-40
Item#:
TT-40
Manufacturer Item:
TT-40
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Rheem Professional Classic PROG40-40N RH62 V2 Lead Free Atmospheric Vent Residential Tall Natural Gas Water Heater, 40 Gallon, 40000 BTU
,
- Guardian System and sensor - exclusive air/fuel shut-off device
- Maintenance free - no filter to clean
- Protective control system that disables the heater in the presence of flammable vapor accumulation
- Eco-friendly burner, low NOx design
- Premium grade anode rod provides long lasting tank protection
- Easy to light - no matches required
- EverKleen patented system fights sediment build-up
- Enhanced flow brass drain valve
- Temperature and pressure relief valve installed
- More hot water at a low operating cost
- 6 years limited tank and component parts warranties
,
PROG40-40N RH62
PROG40-40N RH62
Item#:
PROG40-40N RH62
Manufacturer Item:
PROG40-40N RH62
Manufacturer:
RHEEM SALES COMPANY, INC.
Crown Boiler Mega-Stor II MS2-075 444 Stainless Steel Indirect Water The mega-stor II is a stainless-steel, indirect water heater that provides abundant domestic hot water powered by a variety of efficient Velocity boilers to fit every application. Available in several sizes, it has a rugged design with a coated steel jacket and heavy-duty polymer top and bottom to resist cracks and abrasions. This product is robotically welded, hydrostatically tested and passivated for maximum corrosion resistance.,
,
,
crown boiler ms2-075
crown boiler ms2-075
Item#:
MS2-075
Manufacturer Item:
MS2-075
Manufacturer:
CROWN BOILER COMPANY