Weil-McLain 386700980 Section Assembly WGO/WTGO-4

386700980

386700980

Boyertown Furnace Solaia SL375 Cast Iron Oil-Fired Boiler without Burner, 86.1% AFUE, 175,000 BTU Input, 153,000 BTU DOE Less Burner
We are pleased to bring Solaia, a gem of European engineering and design, to the homes of America. Solaia boilers are manufactured in compliance with ISO 9002 standardsand combine the high efficiency and convenient serviceability of European technology with Boyertown Furnace Companys more than 40 years of dependability, quality, and heating expertise.

• 6" Flue
• Height 29"
• Width 18"
• Length 23"
• Weight 390 Pounds
• 3 pass wet-base design
• Low mass
• Standard design pressure to 58 psi
• Superior serviceability with easy access to all flue passages
• Left or right-hinged front door is completely removable in tight installations
• Limited lifetime warranty
• Direct vent capabilities
• Positive pressure fired vessel
• Energy star rating

,
,

Boyertown Boilers 705505HS

Boyertown Boilers 705505HS

Boyertown Furnace Solaia SL375 Cast Iron Oil-Fired Boiler without Burner, 86.1% AFUE, 140,000 BTU Input, 122,000 BTU DOE Less Burner
We are pleased to bring Solaia, a gem of European engineering and design, to the homes of America. Solaia boilers are manufactured in compliance with ISO 9002 standardsand combine the high efficiency and convenient serviceability of European technology with Boyertown Furnace Companys more than 40 years of dependability, quality, and heating expertise.

• 6" Flue
• Height 29"
• Width 18"
• Length 23"
• Weight 350 Pounds
• 3 pass wet-base design
• Low mass
• Standard design pressure to 58 psi
• Superior serviceability with easy access to all flue passages
• Left or right-hinged front door is completely removable in tight installations
• Limited lifetime warranty
• Direct vent capabilities
• Positive pressure fired vessel
• Energy star rating

,
,

Boyertown Boilers 705504HS

Boyertown Boilers 705504HS

Boyertown Furnace Solaia SL375 Cast Iron Oil-Fired Boiler without Burner, 85% AFUE, 105,000 BTU Input, 91,000 BTU DOE Less Burner
We are pleased to bring Solaia, a gem of European engineering and design, to the homes of America. Solaia boilers are manufactured in compliance with ISO 9002 standardsand combine the high efficiency and convenient serviceability of European technology with Boyertown Furnace Companys more than 40 years of dependability, quality, and heating expertise.

• 6" Flue
• Height 29"
• Width 18"
• Length 19"
• Weight 300 Pounds
• 3 pass wet-base design
• Low mass
• Standard design pressure to 58 psi
• Superior serviceability with easy access to all flue passages
• Left or right-hinged front door is completely removable in tight installations
• Limited lifetime warranty
• Direct vent capabilities
• Positive pressure fired vessel
• Energy star rating

,
,

Boyertown Boilers 705503HS

Boyertown Boilers 705503HS

Thermo Dynamics Boilers S125/150 Steel High Altitude Oil-Fired Water Boiler, 175K BTU-210K BTU Input, 148K BTU-174K BTU Output, 83 - 84.3% AFUE, With Beckett Burner

• Allows the installer to size the boiler more closely to the home heating needs for greater efficiency, the lowest firing rate, 0.85 - 87000 BTU, is necessary for many well insulated homes where the heat loss is minimal
• 1" thick pyrolite ceramic fiber combustion chamber, fast warm-up - glows to incandescence in 11 - 17 sec, large diameter allows brushing flue passages without punching through chamber
• S-series operates at 140 psi pump pressure for better fuel atomization, thereby having the ability to tolerate fuel oil with heavy ends
• S-series is standard with a state-of-the-art, solid state ignition system, making it more tolerant to low VAC age or VAC age fluctuations
• Integrated ignition
• Electronic delay with solenoid valve clean-cut fuel pump
• S-series has exceptional water content, the first size has 16 Gallon of water, high water volume and placement of the coil in the hottest part of the boiler allows for maximum coil performance
• The unique tube design of the S-series boiler heat exchanger slows the flue gases, allowing for more effective heat transfer without the need for extreme baffling often seen in other vertical tube boilers
• Each boiler is constructed and hydrostatically tested in accordance with ASME boiler code, the capacity and efficiency are rated in accordance with the standards of the institute of boiler and radiator manufacturers (IBR)
• Built-in air scoop purges air from the system providing a quiet, trouble free hot water heating system without the use of external devices
• Extended flange coil is away from the boiler for easy accessibility, use of ribbed neck carriage bolts eliminates the problems encountered when a weld stud is broken during servicing, large coil plate allows for a greater gasket sealing area
• Extended weld fittings of SA106 Schedule 80 seamless pipe extend beyond the jacket and allow the service technician or homeowner to see small leaks that, if undetected, could later damage the boiler shell and void the warranty
• Easy cleaning and maintenance accessibility to combustion areas and the open tubes make it easy for the service technician to thoroughly clean the boiler
• Flush jacket, altitude, temperature and pressure gauge, ASME relief valve, thankless heater - 3 gpm, factory assembled, wired and packaged, 3450 RPM high-speed flame retention oil burner, interrupted primary ignition, hydronic triple aquastat relay, 007 circulator pump, brass boiler drain valve
• Lifetime limited warranty

710-60

710-60

Weil-McLain Natural Gas Fired CGA-4 Cast Iron High Efficiency High Altitude Water Boiler, 84% AFUE, 105K BTU

• Compact design saves valuable living space
• Easily accessible controls, vertical flue ways and top cleaning for easy and quick servicing
• Factory tested
• 2-piece top jacket panel
• Insulated extended steel jacket
• Cast iron sections with built-in air separator
• Radiation plates
• Vertical draft hood
• Automatic vent damper included
• Combination gas valve for 24 volt
• Wiring harness
• Non-linting pilot burner
• Stainless steel burners
• Electrical junction box
• Rollout thermal fuse element
• High limit temperature control
• Spill switch
• 30 psi ASME relief valve, boiler sections tested for 50 psi working pressure
• Combination pressure temperature gauge
• Drain valve
• Integrated boiler control module with intermittent electronic ignition system and indicator/diagnostic lights
• 40 VA transformer
• Plug-in connector and wiring
• 1/2" gas connection
• Taco 007 circulator pump
• 4500 - 7000 feet altitude

CGA4PIDNT0074.5-7KS1

CGA4PIDNT0074.5-7KS1

Weil-McLain WMCGA4PIDNS3 Natural Gas Fired Cast Iron High Efficiency Water Boiler

WMCGA4PIDNS3

WMCGA4PIDNS3

Weil-McLain WMCGA7PIDNS3 Natural Gas Fired Cast Iron High Efficiency Water Boiler

WMCGA7PIDNS3

WMCGA7PIDNS3

Weil-McLain WMCGA5PIDNS3 Natural Gas Fired Cast Iron High Efficiency Water Boiler

WMCGA5PIDNS3

WMCGA5PIDNS3

Weil-McLain Natural Gas Fired CGA3PIDLS3 LP Cast Iron Water Boiler 70K BTU 84% AFUE

CGA3PIDLS3

CGA3PIDLS3

Weil-McLain LP Gas Fired CGA5PIDLS3 Cast Iron Water Boiler 140K BTU 84% AFUE

CGA5PIDLS3

CGA5PIDLS3

Standard Equipment:

Integrated boiler control module with intermittent electronic ignition system & indicator/diagnostic lights

Integrated low-water cutoff, with test button

Combination pressuretemperature gauge

Two-piece, top jacket panel

Insulated extended steel jacket

Cast iron sections with built-in air separator

Radiation plates

Steel base

Inducer assembly (with coversizes 256 only)

Flue gas collector/transition assembly

Combination gas valve for 24 volt

Wiring harness

Air pressure switch

Non-linting pilot burner

High-grade stainless steel burners

40 VA transformer

Electrical junction box

Rollout thermal fuse element

High-limit temperature control

Circulator (when ordered)  Sizes 255: Taco 007e  Sizes 68: Taco 007

30 PSI ASME relief valve (boiler sections tested for 50 PSI working pressure)

Drain valve

CGI6PI