Embassy Industries Hide-A-Vector 3 HAV-88-3 Galvanized Steel Compact

Embassy Industries HAV-88-3

Beacon Morris K84 Twin-Flo III Kick Space Heater TWIN-FLO III heaters are for use with forced hot water residential heating systems and consist of a copper tube, aluminum finned heating element, with an electric motor and blower of unique cross flow design. Their purpose is to deliver a comfortable stream of warmed air, at or near floor level, and their construction is extremely compact so minimum space is required for installation.

Kickspace heaters are the space-saving alternative to hot water baseboard
• The type K heater is primarily used in horizontal floor installation, for example under a kitchen counter cabinet or bathroom sink enclosure
• They are ideal for radiant systems with the use of a low temperature Aquastat designed to turn the unit on at 11 deg F
• Type W is for vertical mounting, fully recessed in the wall studs, with the air discharged upward through a flush mounted, louvered front panel
• Type F is a surface mounted wall unit, with the air discharged evenly through a louvered front panel in an upward direction
• All types have heating elements with 1/2" nominal (5/8" outside diameter) copper tube connections and 115 volt
• Electric blower motor, interwired with a 12 deg F (49 deg C) reverse acting Aquastat that prevents operation until hot water is circulating
• These units are not intended to be used on one or two pipe steam systems
• For gravity fed systems, it is recommended that a separate circulator pump be installed for the Kickspace heater
• Designed to fit inconspicuously under a cabinet, in the floor, on or in the wall
• Hot water from the home's boiler is circulated through the Kickspace unit and the fan gently blows heated air into the room
• The homeowner simply selects the fan speed, then the unit turns on and off automatically according to heating demand,
  
  

  beacon morris k84

Embassy Industries SCP-632-8 High Capacity Baseboard 8' W/ 3/4" Connections Copper Tube, Aluminum Fin
System 6 is a heavy-duty baseboard heating product that provides specifying engineers and contractors a choice of six interchangeable high output heating elements in one low profile enclosure. This allows for more design flexibility than any competitors baseboard system. System 6s low profile makes it ideal where space is at a premium, while the extra-high heat outputs of all six elements meet nearly every heating requirement.

Finger-touch snap-on damper opens and closes with ease, without the use of hinges which can bind or loosen with age
• With a rugged 18 ga Galvanized steel front panel, theres none heavier in the industry, this sturdy front panel resists dents and always looks new, year after year
• Constructed with strong, heavy gauge support brackets which will stand up to years of wear and tear without bending or tattering in any way
• Unique tube support design allows for fast and easy installation of a return line
• All copper/aluminum heating elements have an expanded end for easy sweat connections without couplings
• Easy glide polypropylene expansion cradles are attached to the fins on all six elements over the support brackets
• 3/4" copper tube with 2 x 3-1/4 x 0.01" aluminum fin
• 58 fins/feet spacing
• 0.32 feet/100 feet pressure drop at 500 Lbs../hr
  
  

  Embassy Industries SCP-632-8

Embassy Industries SCP-632-7 High Capacity Baseboard 7' W/ 3/4" Connections Copper Tube, Aluminum Fin
Embassy Industries SCP-632 Baked Enamel 18 ga Galvanized Steel High System 6 is a heavy-duty baseboard heating product that provides specifying engineers and contractors a choice of six interchangeable high output heating elements in one low profile enclosure. This allows for more design flexibility than any competitors baseboard system. System 6s low profile makes it ideal where space is at a premium, while the extra-high heat outputs of all six elements meet nearly every heating requirement.,

Embassy Industries SCP-632-7

Embassy Industries SCP-632-6 High Capacity Baseboard 6' W/ 3/4" Connections Copper Tube, Aluminum Fin
System 6 is a heavy-duty baseboard heating product that provides specifying engineers and contractors a choice of six interchangeable high output heating elements in one low profile enclosure. This allows for more design flexibility than any competitors baseboard system. System 6s low profile makes it ideal where space is at a premium, while the extra-high heat outputs of all six elements meet nearly every heating requirement.

Finger-touch snap-on damper opens and closes with ease, without the use of hinges which can bind or loosen with age
• With a rugged 18 ga Galvanized steel front panel, theres none heavier in the industry, this sturdy front panel resists dents and always looks new, year after year
• Constructed with strong, heavy gauge support brackets which will stand up to years of wear and tear without bending or tattering in any way
• Unique tube support design allows for fast and easy installation of a return line
• All copper/aluminum heating elements have an expanded end for easy sweat connections without couplings
• Easy glide polypropylene expansion cradles are attached to the fins on all six elements over the support brackets
• 3/4" copper tube with 2 x 3-1/4 x 0.01" aluminum fin
• 58 fins/feet spacing
• 0.32 feet/100 feet pressure drop at 500 Lbs../hr
  
  

  Embassy Industries SCP-632-6

Embassy Industries SCP-632-4 High Capacity Baseboard 4' W/ 3/4" Connections Copper Tube, Aluminum Fin
System 6 is a heavy-duty baseboard heating product that provides specifying engineers and contractors a choice of six interchangeable high output heating elements in one low profile enclosure. This allows for more design flexibility than any competitors baseboard system. System 6s low profile makes it ideal where space is at a premium, while the extra-high heat outputs of all six elements meet nearly every heating requirement.

Finger-touch snap-on damper opens and closes with ease, without the use of hinges which can bind or loosen with age
• With a rugged 18 ga Galvanized steel front panel, theres none heavier in the industry, this sturdy front panel resists dents and always looks new, year after year
• Constructed with strong, heavy gauge support brackets which will stand up to years of wear and tear without bending or tattering in any way
• Unique tube support design allows for fast and easy installation of a return line
• All copper/aluminum heating elements have an expanded end for easy sweat connections without couplings
• Easy glide polypropylene expansion cradles are attached to the fins on all six elements over the support brackets
• 3/4" copper tube with 2 x 3-1/4 x 0.01" aluminum fin
• 58 fins/feet spacing
• 0.32 feet/100 feet pressure drop at 500 Lbs../hr
  
  

  Embassy Industries SCP-632-4

Diversitech 6-1 PVC Condensate Drain Pan Fitting 3/4" Slip

44348

Beacon Morris K42

Beacon Morris K42